Emtek 7575 Missoula 5-1/2" Keyed Sideplate Lockset, Dummy (Pair) - Sandcast Bronze Tubular

It's a dummy pair, so there is no latch and no locking. The Missoula 7575 sideplate set is fixed trim on both faces of the door, used as a pull on doors that don't need to latch (closet, pantry, or an inactive leaf of a pair). If you need a working latch or a key, you want the passage, privacy, or keyed version of the Missoula sideplate instead.

No door prep is needed. The dummy version is surface mount, so it screws to the face of the door rather than dropping into a 2-1/8 inch bore. That makes it a clean retrofit on a slab that was never prepped, and it's why the backset question doesn't apply to the dummy pair.

It covers 1-3/8 to 1-3/4 inch doors, which spans standard interior slabs and full 1-3/4 inch doors. There's a door thickness field on the order if your door falls outside the usual range, so state the measured thickness when you order.

Yes, handing is a required selection, right hand or left hand. Levers are handed by design, so pick the hand that matches the door swing before ordering. Get it wrong and the lever points the wrong way even though the plate itself is symmetrical.

The Emtek 7575 Missoula is a dummy-function sideplate lockset sold as a pair, so both faces of the door get trim with no latch action. The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on a 5-1/2 inch center-to-center spacing, which is the same 5-1/2 inch spacing the Missoula 7575 uses. Both suit a door held by a roller catch, ball catch, or magnetic catch, with the Omnia giving you a lever on a plate with a deadbolt-style companion look and the Emtek giving you a sandcast bronze sideplate with your choice of knob or lever trim.

The Emtek 7575 Missoula is dummy function, meaning it is trim only and does not lock. For a sideplate-style lever set that actually secures the door, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, keyed outside with a thumbturn inside. If you need key operation from both sides, such as on a door with glass beside it, the Omnia D12036AC is the double cylinder version of the same sideplate design.

Any Sandcast Bronze knob or lever in the line. Levers include Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma. Knobs include Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. The trim style is a required choice on the order.

It's a residential product. For an office, school or multifamily corridor door that has to meet a commercial spec, go to a Grade 1 or Grade 2 cylindrical lockset instead. The Missoula sideplate suits homes, model units, and hospitality-style interiors.

No. The Omnia D12036A is a single cylinder deadbolt lever lockset, so it throws a bolt and takes a key on the outside, which is more hardware than a closet or pantry door needs and requires the matching bolt prep. The Emtek 7575 Missoula is dummy function and surface mounts with no door prep required, which is what a non-latching closet or double door usually calls for. If you want a dummy pair with an Omnia deadbolt-style appearance, the D12036PD is the dummy version in that family.

Both are dummy trim sets with no latching function. The Emtek 7575 Missoula is sandcast bronze from Emtek's Sandcast Bronze collection, with a 5-1/2 inch keyed-style sideplate available in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze, and you choose the inside knob or lever from a long list of rustic and traditional designs. The Omnia D12036PD is solid brass construction with lever trim on plates at 5-1/2 inch center to center. The Emtek route gives you knob or lever choice and a cast bronze texture; the Omnia is a brass lever set.

No. The Emtek 7575 Missoula is non-keyed dummy trim and provides no locking at all, so it cannot serve a double-cylinder requirement. The Omnia D12036AC is a double cylinder deadbolt lever lockset with a sideplate design, keyed both inside and outside, which is the configuration typically specified where glass is within reach of the bolt. Confirm your local code allows double cylinder on that opening before ordering.

Three: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). All three are sandcast bronze, so they vary slightly piece to piece, which is normal for cast product and part of the rustic look.

It ships as a complete set with trim for both sides of the door, and it is sold as a pair, so one order covers a single door. Mounting hardware aside, you'll want to confirm your screw length matches your slab thickness within the 1-3/8 to 1-3/4 inch range.

Yes, that is a common approach. Use the Emtek 7575 Missoula dummy pair on the doors that only need trim, such as inactive double door leaves and closets, and a keyed sideplate set such as the Omnia D12036A single cylinder on the entry. The Missoula is rated for residential use and takes doors 1-3/8 inch to 1-3/4 inch thick. Note the plate designs and finishes come from different manufacturers, so match visually before committing a whole floor.