Emtek 7375 Missoula 3-5/8" C-to-C Keyed Sideplate Lockset, Dummy (Pair) - Sandcast Bronze Tubular

It is a dummy set, non-keyed and with no latching mechanism. The knob or lever does not turn a latch, so it works purely as a pull and trim on a door that is held by something else, like a ball catch, roller catch, magnetic catch, or a surface bolt on a closet or french door. If you need the door to latch or lock, you want a passage, privacy, or keyed entry function instead.

No boring. The Missoula 7375 dummy pair is surface mount, so it screws to the face of the door with no 2-1/8 inch cross bore or latch bore needed. That makes it a common choice for retrofitting trim onto an existing french or closet door without cutting into it.

Yes. The Missoula sideplate lockset covers doors from 1-3/8 inch up to 1-3/4 inch, which spans standard interior doors and standard exterior thickness. There is also a door thickness field on the order, so state your actual thickness when you place it.

Handing is required whenever you choose a lever for the inside trim, since a lever has to point toward the latch edge of the door. Right hand and left hand are both offered. If you pick one of the knob styles instead, the knob itself is symmetrical, but the order still asks for handing so the sideplates are oriented correctly for your opening.

Yes, and that is the point of ordering it as a set. The inside trim can be any of Emtek's sandcast bronze styles: Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma levers, or Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence knobs. Pick the same style and finish you used on the passage and privacy openings and the dummy reads identically on the door.

A dummy will not secure anything, so step up to a keyed sideplate set. Among comparable sideplate-style lever locksets, the Omnia D12036A is single cylinder (key outside, thumbturn inside) and the D12036AC is double cylinder, keyed both sides. Single cylinder is the usual pick for an entry door; double cylinder is used where there is glass next to the lock, subject to your local egress code.

The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center-to-center spacing, making it the closest dummy sideplate counterpart. The Emtek 7375 Missoula dummy pair is a sandcast bronze tubular set on 3-5/8 inch center-to-center spacing, so the two set different hole spacings in the door and different materials - bronze versus brass.

A dummy set is trim only; the Emtek 7375 Missoula Missoula pair is non-keyed and has no locking function. For a locking sideplate lever set, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is the double cylinder version with a sideplate design - the double cylinder takes a key on both faces rather than a thumbturn inside.

The Missoula plate is 3-5/8 inch center to center. On a dummy pair it does not drive a bore layout, but it does set the spacing between the upper and lower plate features, so it is the number to match if you are putting these alongside other Emtek sideplate sets on adjacent doors and want the visual spacing to line up.

The 7375 Missoula dummy is sold as a pair, so you get trim for both faces of the door. It ships as a complete set with the knob or lever and plates included.

Three sandcast bronze finishes: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). These are living bronze finishes from Emtek's Sandcast Bronze collection, so they patina with handling and will not match a plated brass or nickel finish elsewhere in the house.

It is a residential product, sandcast bronze trim for homes and rustic interiors. For corridor or tenant doors in a commercial building or apartment turn, you want commercial bored hardware with a stated grade rather than a decorative sandcast dummy pair.

The Emtek 7375 Missoula is part of the Sandcast Bronze collection with a rustic styling theme, offered in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze, with the inside trim chosen from bronze knob and lever styles. The Omnia D12036A, D12036AC, and D12036PD are solid brass construction sideplate lever sets. So the choice is bronze sandcast texture with lever or knob trim options versus solid brass lever trim.

Bronze, sandcast, which is why the plates carry the slightly irregular surface texture of that collection rather than a machined-smooth face. It is a heavier, hand-finished casting than stamped trim, and the finish is meant to age.