Emtek 7209 Rope 7-1/2" Non-Keyed Sideplate Lockset, Privacy - Brass Tubular

Yes, as long as the door has the standard 2-1/8 inch cross bore. The Emtek 7209 Rope privacy set uses one standard 2-1/8 inch door prep, and the latch is adjustable for either a 2-3/8 inch or 2-3/4 inch backset. Door thickness range is 1-3/8 to 1-3/4 inches, so it covers both older interior doors and standard 1-3/4 inch doors. The sideplate itself is 7-1/2 inches, so the stile has to be wide enough to carry that plate without running into the stop or the edge.

Handing is required on this one. If you are choosing a lever, the lever has to be handed to the door, and handing is a required selection either way (right hand or left hand). Stand outside the door: if the hinges are on your right it is a right hand door. Get this wrong on a lever and the lever points up instead of down.

It is non-keyed. The 7209 is a privacy (bed/bath) function, so it locks with a thumbturn or button on the inside and has an emergency release on the outside, with no cylinder and no key. If you need a keyed entry or a deadbolt on that opening, this is the wrong function.

The 7209 Rope sideplate can be ordered with any Emtek brass knob or lever style, and the option list runs the full range, from traditional Rope, Providence and Victoria knobs through Cortina, Milano and Turino levers to crystal knobs and the modern L-Bar, T-Bar and R-Bar families. So if the rest of the house is already on an Emtek brass trim design, you can carry that same design onto the sideplate doors. Finish is one of five: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), or French Antique (US7).

The Emtek 7209 Rope sideplate lockset is a non-keyed privacy/bed/bath function, so it is meant for bedrooms and bathrooms rather than an exterior opening. For a keyed sideplate lever set, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is the double cylinder version of the same design, keyed on both sides for doors with adjacent glass.

No. The Emtek 7209 Rope sideplate set is a privacy/bed/bath function with a working tubular latch and strike plate, so it latches and locks. For a door that does not need to latch, the Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates, supplied in a double dummy function at 5-1/2 inch center to center, which mounts surface-only on both faces of the door.

No. The 7209 Rope sideplate set is a residential lockset, solid brass, traditional styling. For a commercial corridor, a stairwell, or anything on a fire-rated opening in a multi-family or institutional building, you want a Grade 1 or Grade 2 cylindrical or mortise lock instead. This one belongs on bedroom and bathroom doors in homes and in higher-end residential or hospitality guest rooms.

A sideplate set like the Emtek 7209 mounts on a long vertical plate, 7-1/2 inches here, rather than a small round or square rose. Same tubular guts and the same single 2-1/8 inch bore, so the door prep is identical, but the plate covers more of the stile and reads as a period or traditional detail. If you are replacing a rosette set on an already-bored door, the sideplate drops into the same hole and the plate hides any old wear or scarring around it.

The 7209 ships with its own strike plate, and the latch faceplate is available with round or square corners so it can follow the prep already routed in your door edge. If your frame has an older strike cut, plan on either matching the corner style or patching and re-routing the frame mortise to the new strike.

Both are solid brass sideplate lever locksets with a deadbolt. The D12036A is single cylinder, meaning a key outside and a thumbturn inside. The D12036AC is double cylinder, requiring a key on both faces, which is the configuration typically chosen where glass is close enough to the lock to be broken and reached through.

They are different manufacturers and different plate designs, so the trim will not visually match. The Emtek 7209 is a 7-1/2 inch Rope sideplate in brass with the inside knob or lever style selected at order, while the Omnia D12036PD is a solid brass double dummy lever set with plates at 5-1/2 inch center to center. If a matched look across the openings matters, keep all the doors within one manufacturer's sideplate series and change only the function.