Emtek 8202 Belmont 7-1/2" Non-Keyed Sideplate Lockset, Privacy - Brass Tubular

Pick 2-3/8 inch or 2-3/4 inch when you order. Measure from the door edge to the center of the 2-1/8 inch bore: 2-3/8 is the common residential backset, 2-3/4 the other standard. The latch supplied is adjustable between the two, and 2-3/8 ships as standard unless you specify 2-3/4.

Handing is required if you choose a lever. Order right hand or left hand based on the side the door is hinged on as you stand outside the room. Knob trim is symmetrical, so handing is not a concern there, but the order form asks for it either way.

Non-keyed. It is a privacy (bed and bath) function: a thumbturn or push button locks it from the inside and there is an emergency release on the outside, with no cylinder and no key. For an entry door that needs a key, this is the wrong product.

No. The Emtek 8202 Belmont is a tubular privacy lockset that comes as a complete set with latch and strike plate and requires a 2-1/8 inch cross bore, so it is meant for a door that actually latches. For a fixed or non-latching pair, the Omnia D12036PD is a double dummy solid brass lever lockset with plates on a 5-1/2 inch center-to-center spacing, which mounts as trim only.

It ships as a complete set: the sideplate trim, your chosen knob or lever, the latch, and the strike plate. You do not need to buy a latch or strike separately. What you do choose at order time is the finish, the inside knob or lever style, handing, and backset.

Five: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). These are Emtek's brass collection finishes, so they line up with other solid brass Emtek trim. Note that Unlacquered Brass is a living finish and will patina over time, while Polished Brass Lifetime is coated to stay bright, so don't mix the two on the same run of doors.

Yes. The Belmont sideplate accepts any Emtek brass knob or lever style, which includes crystal knobs like Bristol, Windsor, Georgetown and Old Town, porcelain Ebony and Ice White, and the full lever range from Cortina to Athena. You pick the inside trim style as part of the order.

It's a residential product. Solid brass tubular construction with privacy function, built for homes and light-duty interior doors like bedrooms and baths. For a high-traffic commercial opening you want a Grade 1 or Grade 2 cylindrical lock instead.

Different jobs. The Belmont 8202 is a non-keyed privacy set for bedroom and bath doors, with no cylinder. The Omnia D12036A is a single cylinder deadbolt lever lockset and the D12036AC is the double cylinder version, both keyed for exterior openings. The Omnia D12036PD is a double dummy with plates on 5-1/2 inch centers, meaning no latch at all, for a fixed or inactive door. If you need security, go Omnia single or double cylinder; if you just need a door that locks from inside, the Belmont is the one.

They are not interchangeable by function. The Emtek 8202 Belmont is a privacy/bed/bath set with no keyway, which is what a bathroom or bedroom door normally uses. The Omnia D12036A is a single cylinder deadbolt lever lockset, a keyed function intended for an entry opening. Both are solid brass, but a keyed cylinder on a bathroom door is generally not what a bed/bath opening calls for.

Both Omnia units are solid brass sideplate deadbolt lever locksets. The D12036A is single cylinder, keyed on the outside with a thumbturn inside. The D12036AC is double cylinder, keyed on both faces. Pairing either on the entry doors while running the Emtek 8202 Belmont privacy sets on bedrooms and baths keeps a sideplate look through the plan, since the 8202 is the non-keeyed privacy function in a 7-1/2 inch sideplate.

The Emtek 8202 Belmont requires handing when ordered as a leverset and requires a backset selection of 2-3/8 inch or 2-3/4 inch because it carries a working latch. The Omnia D12036PD is a double dummy lever lockset with plates specified by a 5-1/2 inch center-to-center dimension, so it is surface-applied trim rather than a bored latch assembly.

It's an optional latch that requires less rotation of the knob or lever to retract the bolt, which helps where hand strength or dexterity is limited. Leave it on Standard if you have no reason to change; both latches suit the same 2-1/8 inch bore.

The latch faceplate is available in round corner or square corner, so it matches whichever edge prep is already routed in the door. The bore requirement is a single standard 2-1/8 inch cross bore, so it needs a door with enough face width to take that bore and a 7-1/2 inch plate on the stile.