Emtek 7810 Rope 9-5/8" Non-Keyed Sideplate Lockset, Privacy - Brass Tubular

Yes. The 7810 Rope sideplate lockset covers door thickness from 1-3/8 to 1-3/4 inches, so it works on older 1-3/8 inch interior doors as well as 1-3/4 inch doors.

The latch is adjustable for a 2-3/8 or 2-3/4 inch backset, and backset is a required selection when ordering. Standard ships 2-3/8 inch; call out 2-3/4 inch if your existing bore is set back further from the edge of the door.

Handing is a required choice, right hand or left hand. It matters for leversets in particular, since the lever has to swing down toward the latch side. Knob styles are still ordered under the same handed set.

It is non-keyed. The privacy function locks from the inside, the way a bed or bath door does, with no cylinder and no key. If you need a keyed entry or a deadbolt at that opening, this is the wrong function.

The Emtek 7810 Rope is a non-keyed privacy/bed/bath lockset, so it will not secure an exterior or lockable entry door with a key. For a keyed sideplate lock in solid brass, the Omnia D12036A is a single cylinder deadbolt lever lockset, keyed from the outside with a thumbturn inside. If the opening needs a key on both sides - a door with glass nearby, for example - the Omnia D12036AC is the double cylinder version of the same deadbolt lever lockset with a sideplate design.

No. The Emtek 7810 Rope privacy set is a tubular lockset that includes a working latch and strike plate and bores for a standard 2-1/8 inch cross bore, so it is meant for a door that actually latches. For a non-operating or fixed panel where the trim is surface mounted, the Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center to center spacing.

It ships as a complete set: knob or lever, sideplates, latch and strike plate. You pick the knob or lever style when you order, from the full Emtek brass knob and lever range including Rope Knob, Rope Lever, Egg, Providence, Bristol Crystal and the Stuttgart and Athena levers. Nothing further is needed for a normal privacy door.

It is a residential product, solid brass tubular construction in a traditional Rope design. For apartment interiors, single family homes and hospitality guest rooms it is at home; for a high traffic commercial opening you want a graded commercial bored or mortise lock instead.

Five finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL) and French Antique (US7). Because the trim style is selected separately, you can run the same finish across knob and lever openings in a building and keep the look consistent.

Handing is specified on the Emtek 7810 Rope whenever it is ordered as a leverset, and both right hand and left hand are offered; it is also ordered with a 2-3/8 inch or 2-3/4 inch backset and fits doors 1-3/8 inch to 1-3/4 inch thick. The Omnia D12036A single cylinder and D12036AC double cylinder sideplate deadbolt lever locksets are lever products as well, so lever direction matters on those openings in the same way. The dummy Omnia D12036PD is a double dummy set, so the two levers are non-operating trim.

You can run them on different openings, but they are different products. The Emtek 7810 Rope is a 9-5/8 inch brass sideplate lockset in a privacy function, ordered with any Emtek brass knob or lever style on the inside trim. The Omnia sideplate sets cover the other functions on the same house: D12036A single cylinder and D12036AC double cylinder deadbolt lever locksets in solid brass, and D12036PD as the double dummy. Plate size, escutcheon profile and finish naming differ between the two makers, so match them visually before committing a whole house.