Emtek 8006 Delaware 7-1/8" Non-Keyed Sideplate Lockset, Dummy (Pair) - Brass Tubular

Dummy function, so there is no latch action and no turning mechanism. The Delaware 8006 sideplate set is fixed trim for a door that doesn't need to latch, closet doors, French door inactive leaves, pantry doors held by a roller or ball catch. It's non-keyed. If you need the door to stay shut, plan on a separate catch, because this set won't hold it.

It ships as a pair, one sideplate assembly for each face of the door. That suits a French door leaf or a closet door you touch from both sides. If you only need trim on one face, a pair is more hardware than the opening calls for. The Omnia D12036PD is the other double dummy sideplate set we carry, with a 5-1/2 inch center to center.

No boring needed. The 8006 is surface mount, it screws to the face of the door with no prep. That makes it a straightforward retrofit onto a door that has never been drilled, and it means you're not committed to a bore pattern later. Door thickness range is 1-3/8 to 1-3/4 inches, which covers standard interior and standard commercial-thickness doors.

Yes, and that's the point of the design. The Delaware sideplate takes any Emtek brass knob or lever style, so you can carry the same Providence knob or Milano lever across the passage and privacy sets and the dummy doors and have them read as one suite. Trim style is a required choice on the order, everything from crystal knobs to the knurled T-Bar and L-Square levers.

The Emtek 8006 Delaware is a dummy function set, so it is fixed trim with no latch or bolt operation. If the opening needs a keyed bolt behind lever-and-plate trim, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is the double cylinder version of the same design. Single cylinder takes a key outside and a turn inside; double cylinder is keyed on both faces, which is the choice for a door with glass beside the bolt.

Both are dummy trim sold for an opening that does not latch. The Emtek 8006 Delaware is a non-keyed dummy sideplate lockset in brass, 7-1/8 inch plate, supplied as a pair with the inside trim chosen from the Emtek knob and lever range. The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center to center, so its plate geometry and screw centers are its own. On a retrofit over existing plate scars, that center-to-center difference is what decides whether the trim covers the old holes, so match the dimension before swapping one for the other.

No, and this is the trap on a swap. The Emtek 8006 Delaware dummy is surface mounted and needs no door prep, because there is no latch or bolt to bore for. The Omnia D12036A is a single cylinder deadbolt lever lockset, so it carries a working bolt and cylinder that the door has to be bored to accept. Going from the 8006 to the D12036A on an existing slab means new boring, not just new trim.

Handing is required when you pick a lever. A lever has to point back toward the hinge side, so a left hand lever on a right hand door sits backward. Right hand and left hand are the two choices. Choose a knob instead and the handing question goes away visually, but the order still asks for it.

Eight: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Unlacquered brass is the one to think about, it has no clear coat and will patina with handling, so it won't stay matched to a lacquered US3 set on adjacent doors.

Emtek lists the Delaware 8006 as residential. It's suited to single family, condo, and high-end multifamily interiors where the look matters. For a corridor or a back-of-house door in a commercial facility, a Grade rated bored lockset is the right call instead, not a decorative brass sideplate dummy.

A dummy set such as the Emtek 8006 Delaware provides no locking at all; the trim is fixed and the door holds by other means. For a lever-and-plate assembly that actually secures the opening, the Omnia D12036A is a single cylinder deadbolt lever lockset, which keys from the outside and turns from the inside. Its double cylinder counterpart, the Omnia D12036AC, requires a key on both sides, which some jurisdictions restrict on a residential egress door - confirm the local code before specifying it.

The Emtek 8006 Delaware requires handing to be called out when the inside trim is a lever, since the lever has to fall to the correct side of the door. The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center to center and is catalogued as a double dummy, meaning trim on both faces of the opening. Choosing between them is a question of plate proportion and how the trim is specified, not of function - both are non-operating.