Emtek 83226 Thumbturn Privacy Deadbolt Strike Plate

Both standard backsets are covered: 2-3/8 inch and 2-3/4 inch. Measure from the door edge to the center of the 2-1/8 inch cross bore to see which one your door is prepped for. Since both are supported, you do not have to re-drill an existing door that came bored either way.

It fits standard residential tubular prep: 2-1/8 inch cross bore through the face and a 1 inch edge bore. That is the same prep a common tubular deadbolt uses, so on a door already bored for one you are not enlarging holes. The 83226 is a tubular deadbolt part, not a mortise part, so it will not suit a door prepped with a mortise pocket.

Non-keyed. The 83226 is a privacy bed and bath deadbolt setup operated by thumbturn, with no cylinder and no key on either side. If you need a keyed entry deadbolt for an exterior door, this is the wrong function, you want a keyed Emtek deadbolt instead.

Yes, if the deadbolt is an Emtek thumbturn privacy unit. The 83226 is a replacement strike plate, sold on its own, not a complete deadbolt. If the old strike is bent or the finish has worn off and the bolt and thumbturn are fine, this is the piece you swap. If you need the bolt itself, order the deadbolt.

Both are strike plates for a deadbolt. The Emtek 83226 is a thumbturn privacy deadbolt strike plate in brass, offered in ten finishes including Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26) and Unlacquered Brass (US3NL). The Deltana SP2753 is a steel deadbolt strike plate measuring 2-3/4 inches by 1-1/4 inches. If the deadbolt trim on the door is Emtek and the finish needs to match the rest of the set, the 83226 is the one to stay with; if the strike is hidden behind a jamb and the concern is only the deadbolt prep, the SP2753 covers the same function.

No. The Emtek 83226 is the visible brass strike plate that mounts on the face of the jamb for a thumbturn privacy deadbolt. The Kwikset 81640 is a strike box, and the Kwikset 81231-001 is a metal strike dust box - both are the buried cup that sits inside the jamb mortise and receives the bolt behind the plate. Ordering a strike box when the plate is what is chewed up or the wrong finish leaves the job unfinished, and the reverse is true if the mortise is unlined.

The 83226 is a fixed decorative strike matched to Emtek thumbturn privacy deadbolt trim and offered in ten finishes to match the rest of the door hardware. The Kwikset KWI-80318 Full Round Adjustable Strike is a deadbolt strike whose plate adjusts to take up misalignment between the bolt and the jamb bore. Pick the Emtek when finish match matters and the jamb is prepped right; pick the adjustable one when the bolt is not lining up cleanly. The Deltana SP2753 is another deadbolt strike option, a 2-3/4 by 1-1/4 inch steel plate, if you want a plain rectangular strike.

The 83226 is the face plate only. If you want the bolt hole in the jamb lined so the bolt does not chew into the framing, add a strike box, the Kwikset 81640 Strike Box or the Kwikset 81231-001 Metal Strike Dust Box both serve that purpose behind a deadbolt strike. On a retrofit where a box is already in the jamb, you only need the plate.

They serve different openings. The Codelocks ASA Strike Plate is an ASA-series strike in a stainless steel finish, the long-form strike shape used with ASA-prep jambs. The Emtek 83226 is a residential thumbturn privacy deadbolt strike plate in brass, sized to a tubular deadbolt with a 2-3/8 or 2-3/4 inch backset and a 1 inch edge bore. Match the strike to the prep already in the jamb - an ASA cutout and a tubular deadbolt strike cutout are not interchangeable without rework.

The Emtek 83226 is the finish-matched brass option, which is what you want when the deadbolt trim on the door is Emtek and the strike is visible. Where the strike is painted over, behind a closer-side jamb, or simply not part of the look, the Deltana SP2753 is a 2-3/4 inch by 1-1/4 inch steel deadbolt strike plate, and the Kwikset KWI-80318 Full Round Adjustable Strike covers the same deadbolt function. Across a building where the doors already carry mixed hardware, standardizing on one plain steel strike is the simpler stock item to keep on the shelf.

The Schlage C keyway reference applies to the keyed versions of the Emtek deadbolt platform this strike belongs to. The 83226 itself is a non-keyed thumbturn privacy part, so there is no cylinder in it. If you are keying an Emtek entry deadbolt into an existing Schlage C system elsewhere in the building, that is the keyway the platform uses.

The Emtek 83226 is a residential thumbturn privacy deadbolt strike plate. For an opening being specified on the commercial side, the Codelocks ASA Strike Plate in stainless steel is the ASA-format strike in the set, and the Kwikset KWI-80318 Full Round Adjustable Strike is a deadbolt strike that takes up jamb variation on the job. Confirm the jamb prep and door thickness against whichever strike you specify before the frames are ordered.