Emtek 8464 Rope Deadbolt - Brass - Single Cylinder
- Schlage® C Keyway
- Single Cylinder Deadbolt Includes extension collar for thin doors
- Standard Door Prep and Installation
- Solid Brass Cylinder, Housing, Collar, Thumbturn, and Rosette
- Hardened Steel Bolt
- Heavy Gauge Steel Understrike
- Brass Trim Strike Shipped with Every Deadbolt
- Handing Not Required
- Standard door thickness of 1-3/4". Specify if thicker. EMPowered™ fits door thickness up to 2-1/4".
- Standard latch is for 2-3/8” backset. Specify 2-3/4”backset if required.
Weiser® (WR5) Keyway
- Specify by adding “W” to the beginning of product code.
- No upcharge for cylinder substitution. Can be keyed into existing Weiser® system
Specifications:
- Backset: 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" to 2"
- Keyway: Schlage C
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Deadbolts
- Collection:
- Brass
- Product Type:
- Deadbolts
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Deadbolts
- Commercial/Residential:
- Residential
- Lock Function:
- Deadbolt
- Keyed:
- Yes
- Lock Type:
- Tubular
- Series:
- Rope
- Theme:
- American Designer
- Electronic:
- No
- Keyed Function:
- Single Cylinder
- Handle Type:
- Deadbolt
- Product Attribute:
- Deadbolts
- MAP Policy:
- Yes
- Product Model:
- 8464
- Product Function:
- Cylinder x Thumbturn
- Product Style:
- Traditional
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 8464-US7 – Frequently Asked Questions
1) Will the Emtek 8464 Rope deadbolt fit my door thickness?
The 8464 Rope deadbolt covers 1-3/8 inch to 2 inch doors. It ships set up for a standard 1-3/4 inch door, and a single cylinder includes an extension collar for thin doors, so a 1-3/8 inch door is handled without extra parts. If your door is thicker than 1-3/4 inches, call it out on the order using the Door Thickness field so the correct spindle and screw pack comes with it.
2) What backset and bore does the Emtek 8464 deadbolt need in the door?
Standard door prep: a 2-1/8 inch cross bore in the face and a 1 inch edge bore. Backset is 2-3/8 inches as standard, with 2-3/4 inches available and selected at the time of order. If you are replacing an existing tubular deadbolt, measure from the door edge to the center of the existing hole to confirm which backset you need before you order.
3) Can the Emtek 8464 deadbolt be keyed alike with my existing Schlage locks?
Yes, if your existing locks use the Schlage C keyway. The 8464 ships with a Schlage C cylinder as standard, and keying is selected on the order as keyed different or keyed alike, with an option to key to a specific code. If the rest of the building runs on Weiser, order the W-prefix version instead (W8464 plus the finish code) for a Weiser WR5 keyway that can be keyed into an existing Weiser system.
4) Is the Emtek 8464 Rope deadbolt suitable for a commercial opening?
It is a residential product. The 8464 is a decorative solid brass tubular deadbolt for houses, condos, and high-end multi-family entries. For a commercial or institutional opening where a graded lock is specified, look at a Grade 1 deadbolt such as the Accentra D111 or the Deltana CL200LM, or a Grade 2 like the Arrow DBX61.
5) What is a straight equivalent to the Emtek 8464 Rope deadbolt with a Schlage C keyway from another brand?
The Emtek 8464 Rope deadbolt is a single cylinder, cylinder x thumbturn tubular deadbolt cut for a Schlage C keyway, so it keys into a Schlage C system directly. The Hager 3115 is also a cylinder x thumbturn deadbolt built around a Schlage C keyway, covering doors 1-3/8 inch to 1-3/4 inch, so it drops into the same Schlage C key system on a comparable door. The Hager 3215 is another single cylinder Schlage C deadbolt with a 1 inch throw for 1-3/8 inch to 1-3/4 inch doors. The difference is the trim: the 8464 uses solid brass housing, collar, thumbturn and rosette in the decorative Rope pattern, while the Hager units are plain commercial trim.
6) The Emtek 8464 is a residential deadbolt - what should I use on a commercial opening that needs an ANSI Grade 1 deadbolt?
The Emtek 8464 Rope deadbolt is a residential single cylinder tubular deadbolt. When an opening calls for a Grade 1 deadbolt, the Accentra D111 is a Grade 1 single cylinder cylinder x thumbturn deadbolt with a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch. The Falcon D111 is a Grade 1 heavy duty cylinder x thumbturn deadbolt with an adjustable backset. The Dexter DB1000 single cylinder is Grade 1 cylinder x thumbturn for doors 1-3/8 inch to 1-7/8 inch. All three keep the same key outside, turn inside operation as the 8464.
7) I need a double cylinder deadbolt, keyed both sides - what takes the place of the Emtek 8464?
The Emtek 8464 is a single cylinder deadbolt, cylinder outside and thumbturn inside, so it will not serve an opening that requires a key on both faces. For key-both-sides, the Baldwin Reserve Double Cylinder Contemporary Round deadbolt and the Contemporary Square version are double cylinder units in decorative trim. On the commercial side, the Hager 3214 is a double cylinder deadbolt with a Schlage C keyway for doors 1-3/8 inch to 1-3/4 inch, and the Dexter DB1000 double cylinder is Grade 1 for doors 1-3/8 inch to 1-7/8 inch. Confirm local egress code before specifying double cylinder on an exit door.
8) My door prep is not a standard 2-3/8 or 2-3/4 backset - what deadbolt handles an unknown backset better than the Emtek 8464?
The Emtek 8464 ships with a 2-3/8 inch backset latch standard and a 2-3/4 inch backset on request, so the backset has to be known at order time. Where the backset is uncertain or mixed across a building, the Brinks Raleigh Series round single cylinder deadbolt and the Brinks Mendocino Series square single cylinder deadbolt both use a 4-way adjustable backset, and the Cal-Royal ED500 is a Grade 3 single cylinder deadbolt with an adjustable backset for doors 1-3/8 inch to 1-3/4 inch. The Falcon D111 also uses an adjustable backset at Grade 1. All keep the cylinder x thumbturn function.
9) The opening needs a fire rated deadbolt - can I use the Emtek 8464?
The Emtek 8464 Rope deadbolt is a residential single cylinder unit. Where a fire rated deadbolt is required, the Hager 3115 Grade 2 cylinder x thumbturn and the Hager 3215 single cylinder with 1 inch throw both carry a fire rating and fit doors 1-3/8 inch to 1-3/4 inch, as does the Hager 3118 Grade 1 classroom deadbolt with a 6-pin Schlage C cylinder. The Cal-Royal CRB800 is a Grade 1 heavy duty single cylinder deadbolt with a UL 3-hour fire rated latch. All four are cylinder x thumbturn like the 8464.
10) I want to key the deadbolt into an existing small format interchangeable core system - what do I order instead of the Emtek 8464?
The Emtek 8464 is supplied with a Schlage C cylinder, or a Weiser WR5 cylinder by adding a W to the front of the product code, so it keys into a Schlage C or Weiser system rather than an interchangeable core system. For SFIC, the Arrow E61 is a Grade 2 single cylinder deadlock prepped for SFIC less core, fitting doors 1-3/8 inch to 1-3/4 inch, and the Deltana CL200LAIC is a Grade 2 single deadbolt with an interchangeable core prep, less cylinder, on a 2-3/4 inch backset. The Delaney LM Series is a Grade 1 single cylinder less core deadbolt in cylinder x thumbturn.
11) Which products look like alternatives to the Emtek 8464 deadbolt but will not work in the same door prep?
The Emtek 8464 is a tubular deadbolt using a 2-1/8 inch cross bore and 1 inch edge bore, so it needs a standard bored door prep. Several deadbolts that read as substitutes use a different prep: the Corbin Russwin DL3011 and DL3211 are cylindrical deadlocks in cylinder x blank function, with no thumbturn inside. The Dormakaba D900 is a small case mortise deadbolt and the Codelocks CL2210 is an electronic mortise deadbolt, both needing a mortise pocket rather than a bored hole. The Codelocks CL200 is a surface mounted deadbolt with key override, applied to the door face. The Callan 205S is a one-sided half-bore deadbolt with no outside cylinder at all.
12) Do I have to specify handing for the Emtek 8464 Rope deadbolt?
No. Handing is not required on the 8464, so the same part works on a left or right hand door. What you do have to specify is backset, keying, and door thickness if the door is over 1-3/4 inches.
13) What comes in the box with the Emtek 8464 deadbolt, and do I need to buy a strike separately?
Everything for a standard install is included. A brass trim strike ships with every deadbolt, along with a heavy gauge steel understrike behind it for the frame reinforcement. The cylinder, housing, collar, thumbturn, and rosette are solid brass, and the bolt itself is hardened steel. No separate strike purchase is needed.
14) Is the Emtek 8464 a single cylinder or double cylinder deadbolt?
Single cylinder: key outside, thumbturn inside. That is the right choice for a door with no glass within reach of the turn. If the entry has sidelights or glass panels and your local code allows a key on both sides, look at a double cylinder instead, such as the Baldwin Reserve Double Cylinder Contemporary Round Deadbolt or the Callan Model 210S.
15) I need a matching deadbolt for a rope pattern knob or lever set. Is the 8464 the right one?
Yes. The 8464 is the Rope series deadbolt in solid brass, a traditional American Designer pattern meant to sit above matching Emtek Rope trim. Ordering it in the same finish code as the knob or lever set keeps the entry consistent, and because handing is not required you only need to match finish, backset, and keyway.
16) Does switching the Emtek 8464 to a Weiser keyway cost more or change the door prep?
No on both counts. The Weiser WR5 cylinder is a straight substitution with no upcharge, ordered by putting a W in front of the product code, and the door prep is the same standard 2-1/8 inch cross bore and 1 inch edge bore. The finish choices are identical across both keyways.
17) My door is thicker than the Emtek 8464 range - which deadbolt covers a 2-1/4 inch door?
The Emtek 8464 covers doors 1-3/8 inch to 2 inch as a standard mechanical deadbolt, with 1-3/4 inch as the default and thicker doors to be specified. For a door up to 2-1/4 inch, the Corbin Russwin DL3011 Grade 1 cylindrical deadlock covers 1-3/4 inch to 2-1/4 inch, though it is a cylinder x blank function with no inside thumbturn, so it suits an opening where inside key control or a blank plate inside is acceptable.
18) What is a simpler single cylinder deadbolt to use instead of the Emtek 8464 on rental units where decorative brass trim is not needed?
The Emtek 8464 carries a solid brass Rope-pattern housing, collar, thumbturn and rosette. On unit doors where plain trim is fine, the Dexter DB2000 single cylinder is a Grade 2 cylinder x thumbturn deadbolt for doors 1-3/8 inch to 1-3/4 inch, and the Cal-Royal CB160 is a Grade 2 single cylinder deadbolt with a tamper-resistant cylinder guard. The Bravura 310B Elite is a Grade 2 traditional round deadbolt in cylinder x thumbturn if a round rose is wanted to match existing doors. Every one of these operates the same way as the 8464 from the tenant's side: key outside, turn inside.
19) What do I use instead of the Emtek 8464 if I want keypad or credential entry rather than a key?
The Emtek 8464 is a mechanical deadbolt operated by a Schlage C key outside and a thumbturn inside, with no electronics. For credential entry, the Delaney KP400 is a Grade 2 electronic deadbolt with a programmable remote, the Dormakaba Saffire LX-D is an RFID electronic deadbolt with BLE and electronic lock override, and the Dormakaba Nova-D is an RFID multihousing smart electronic deadbolt. The Codelocks CL2200 is a medium duty electronic surface deadbolt in brushed steel.
20) I need a thumbturn-only deadbolt with no outside cylinder - is the Emtek 8464 the right part?
No. The Emtek 8464 is keyed, with a cylinder outside and thumbturn inside. For an opening that should lock from the inside only, the Arrow E60 is a Grade 2 non-keyed exit deadlock in blank plate x thumbturn function for doors 1-3/8 inch to 1-3/4 inch. The Callan 205S is a Grade 3 one-sided half-bore deadbolt, which only requires a partial bore on the inside face.
21) I need a deadbolt and latch working together on one entry door - what covers that instead of the Emtek 8464 alone?
The Emtek 8464 is a deadbolt only; it provides the bolt and no latching function. Where one device should handle both, the Falcon H2101 is a Grade 2 entrance interconnected lock with a single cylinder deadbolt, so lever and deadbolt retract together. The Baldwin Estates 8011 is a contemporary 1-5/8 inch double cylinder deadbolt in entrance function if a decorative Estate Series bolt is wanted alongside separate lever trim.
22) Is the Emtek 8464 an electronic or smart deadbolt?
No, it is a mechanical key and thumbturn deadbolt with no electronics. If you want keypad or app entry on that door, the Delaney KP400 electronic deadbolt or the Codelocks CL2200 electronic surface deadbolt are the alternatives.
23) What is a decorative single cylinder deadbolt other than the Emtek 8464 Rope if I want a square or contemporary rose?
The Emtek 8464 uses the Rope pattern in a traditional style. For a different look with the same cylinder x thumbturn operation, the Bravura 310SC Elite is a Grade 2 contemporary square deadbolt, the Bravura 310RC Elite is a Grade 2 contemporary round deadbolt, and the Bravura Rectangle Deadbolt is a Grade 2 single cylinder in a rectangular rose. The Brinks Mendocino Series is a contemporary square single cylinder deadbolt, and the Callan 200S-G2 is a Grade 2 single cylinder round trim deadbolt.
How fast can I get the Emtek 8464-US7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 8464-US7 come with a warranty?
Absolutely. The Emtek 8464-US7 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 8464-US7?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 8464-US7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.