Emtek 8713 Casement Latch, Large Size (1-1/16" x 2-1/16")

The 8713 casement latch measures 1-1/16 x 2-1/16 inches. That is Emtek's large size in the casement latch line, so it will cover a smaller existing footprint but not a larger one. Measure the plate footprint on your existing latch before ordering; if the old plate is bigger than 1-1/16 x 2-1/16, you will see the old prep around the edges.

It ships as a complete set with mounting screws and three strike plates included. The three strikes let you match the strike to how far the sash sits in from the frame, so you can dial in the closing tension without sourcing anything extra. Nothing else is needed to hang it beyond a screwdriver.

Emtek lists the 8713 as residential. For an apartment or a single-family remodel where the look matters, it fits. For a school, hospital, or high-traffic commercial opening, spec hardware built for that duty instead. It is also entirely mechanical, with no electronic or powered component.

The 8713 is a decorative brass casement latch in Emtek's American Classic styling, meant to hold and pull the sash tight. If your concern is securing the opening rather than the look of it, the Cal-Royal DL402361 is sold as a casement security latch lock for doors and windows and is the one to look at. Pick the Emtek where the hardware is seen and the aesthetic matters; pick the security latch where the job is keeping the window shut against someone trying to open it.

They solve different problems on a casement sash. The Emtek 8713 is a brass casement latch in a 1-1/16 inch by 2-1/16 inch size, built for residential windows and offered in finishes including Oil Rubbed Bronze (US10B), Satin Nickel (US15), Polished Chrome (US26), and Unlacquered Brass (US3NL) so it can be matched to the rest of the hardware in the room. The Cal-Royal DL402361 is a casement security latch lock intended for doors and windows, so its role is securing the opening rather than finishing it. A property manager standardizing sash hardware across a unit for appearance is buying the 8713; someone whose goal is a locking device on the sash should be looking at the DL402361 instead.

The Cal-Royal DL402361 is the casement security latch lock, and it is catalogued for doors as well as windows, which widens where it can be used. The Emtek 8713 is a brass casement latch in the 1-1/16 inch by 2-1/16 inch size, sold as a complete set with screws and three strikeplates, and its job is holding the sash closed with a finished look on the visible face. If the opening needs a security function, specify the DL402361; if it needs a matched decorative latch on a residential sash, the 8713 is the one to order.

Solid brass, both material and substrate. That matters on a casement window because the latch is the piece that gets handled every time the sash opens, and brass takes the wear better than cast zinc. It also means the unlacquered brass version (US3NL) will patina naturally over time rather than flaking a coating.

Eight finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Those are standard US finish codes, so if you already know the code on your existing knobs or window cranks you can match straight across. Polished Brass Lifetime holds its shine; US3NL is left raw to age.

Finish is the only thing you choose on the 8713. There are eight finish options and no separate handed part numbers, so the same latch goes on either a left or right hand casement. Order one set per window.

You can, as long as the sash rails take the 1-1/16 x 2-1/16 inch footprint and the windows are residential units. Every unit ships as a complete set with screws and three strike plates, so each window gets what it needs in the box, and holding to one finish code across the building keeps replacements simple later. Where an older window has a larger existing plate, that opening will show the previous prep.