Emtek 8854 Quincy 9" Non-Keyed Sideplate Lockset, Dummy (Pair)- Brass Tubular

Dummy function only. The Quincy 8854 is a non-keyed dummy pair, so there's no latch mechanism that operates and no key. The knob or lever is fixed and serves as a pull. Use it on the inactive leaf of a double door, on a closet or pantry door held shut by a ball catch or roller catch, or anywhere you want matching trim without a working latch. If you need the door to latch or lock, you want a passage, privacy, or keyed sideplate set instead.

Door thickness range is 1-3/8 to 1-3/4 inches, which covers both a standard interior residential door and a 1-3/4 inch slab. Mounting is surface mount, so no door prep is required for the dummy pair itself. That makes it a straightforward retrofit on a door that has never been bored.

Three choices at order time. Finish, from eight options: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Knob or lever style for the trim, chosen from the full Emtek brass knob and lever range. And handing, right hand or left hand, which is required. Door thickness can be entered as a note if you want it called out.

The Emtek 8854 Quincy is a non-keyed dummy set, so it has no cylinder and no latching function at all. For a locking sideplate opening, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is a double cylinder deadbolt lever lockset in solid brass with a sideplate design. Single cylinder takes a key outside with a thumbturn inside; double cylinder takes a key on both faces, which is the usual choice next to glass but is restricted in some egress applications. The 8854 remains the match when the door is a fixed inactive leaf or a closet slab that only needs pull trim.

The Emtek 8854 Quincy is a non-keyed sideplate lockset in the dummy function, sold as a pair with a 9 inch plate in solid brass. The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates, on 5-1/2 inch center to center, in the double dummy function. Both give you a fixed lever on a plate at both faces of the door with no latching action. The Emtek pair uses one standard 2-1/8 inch door prep and mounts to a door 1-3/8 inch to 1-3/4 inch thick, while the Omnia plate set is specified by its 5-1/2 inch center to center dimension, so confirm which prep matches the door before ordering.

One 8854 order covers both faces of the door. It's sold as a pair, one complete set, so a single order dresses the inside and outside of one leaf. If you're doing both leaves of a French pair, that's two 8854 sets.

Handing matters as soon as you pick a lever. A lever has to point toward the strike edge of the door, so a left hand door and a right hand door take mirrored trim. Emtek calls for handing on the leverset, and the 8854 order form asks for right hand or left hand. Pick handing by standing outside the door: if the hinges are on your left, it's a left hand door. Knob styles are symmetrical, so handing is less consequential there, but the order still asks for it.

The 9 inch Quincy sideplate takes any of Emtek's brass knob and lever designs, so the trim can be matched across a house. That includes crystal knobs (Bristol, Windsor, Georgetown, Hampton, Old Town, Diamond, Providence, Modern Disc, Modern Square), knurled and faceted modern bars (L-Square, T-Bar, R-Bar, Conical), and traditional shapes like the Egg, Melon, Providence, and Waverly knobs, plus levers from Cortina and Milano through to Athena, Poseidon, and Hercules. You choose the trim style separately from the sideplate.

Residential. Emtek classes the Quincy sideplate line as residential hardware, so it belongs on interior doors in houses, condo units, and unit-side openings, not on corridor or stair doors in a commercial building. Property managers buying for unit interiors are fine with it; anything on the life safety side of a facility needs commercial grade hardware instead.

Both are dummy trim on a plate, but they are built to different footprints. The Emtek 8854 is a 9 inch Quincy sideplate in brass, dummy function, sold as a pair, with the knob or lever style chosen separately. The Omnia D12036PD is a solid brass double dummy lever lockset with plates on 5-1/2 inch center to center spacing. If you're covering existing screw holes or matching a plate length already on the door, that 9 inch versus 5-1/2 inch difference is the deciding number.

Backset and latch questions come up because the Quincy sideplate line shares one order form across functions. The 8854 dummy pair is surface mounted with no door prep, so there's nothing to latch and no backset to pick. Where a Quincy sideplate is ordered in a working function, the set includes the trim, latch, and strike plate, the door prep is a standard 2-1/8 inch bore, and the standard latch is 2-3/8 inch backset with 2-3/4 inch available if the bore is set back further. On a dummy door you'll want a ball catch or roller catch to hold the leaf closed.

The plate runs 9 inches, which is what makes a sideplate set useful on a door that carried an older long plate or a mortise lock with a vertical escutcheon. It gives you 9 inches of coverage on each face, and since it's surface mounted with no bore required, you're screwing to the face rather than cutting new prep. Whether it hides everything depends on how far your existing marks spread, so measure the old plate against 9 inches before ordering.

No. The Omnia D12036A is a single cylinder deadbolt lever lockset, so it is keyed and bolts the door; the Emtek 8854 Quincy is a non-keyed dummy pair that does not latch or lock. Swapping one for the other changes the door prep and the way the opening operates, not just the appearance of the plate. If you are matching an existing dummy opening, stay with a dummy set such as the 8854 or the Omnia D12036PD double dummy. If the door needs to secure, the D12036A or the double cylinder D12036AC is the correct family and the door will need the prep that function requires.

The Emtek 8854 Quincy dummy pair is ordered with any brass knob or lever style, so the same 9 inch Quincy plate carries whichever trim you standardize on, and it comes in eight finishes including Oil Rubbed Bronze US10B, Satin Nickel US15, Flat Black US19, Polished Chrome US26, Polished Brass Lifetime US3, Unlacquered Brass US3NL, Pewter US15A and French Antique US7. The Omnia line covers the same doors by function rather than by trim menu: D12036A single cylinder, D12036AC double cylinder with sideplate design, and D12036PD double dummy, all solid brass. If some doors on the floor lock and some do not, the Omnia group keeps one plate family across both; if every door is a dummy and the trim shape is what has to match, the 8854 carries the full brass knob and lever selection.

Brass throughout. Both the material and the substrate on the Quincy sideplate set are brass, which is why it carries the Unlacquered Brass (US3NL) option that will patina over time and the Polished Brass Lifetime (US3) option that won't. It sits in Emtek's Brass collection, so the knob and lever trim you pair with it comes from the brass range as well.

The two Omnia parts differ by cylinder count on the same solid brass sideplate platform: the D12036A is the single cylinder deadbolt lever lockset and the D12036AC is the double cylinder deadbolt lever lockset with sideplate design. The Emtek 8854 Quincy sits outside both as a non-keyed dummy, tubular type, supplied as a pair with a 9 inch plate. If the specification calls out a keyed sideplate you are choosing between the two Omnia functions; if it calls out inactive or dummy trim, the 8854 or the Omnia D12036PD double dummy is the family to quote.

The Emtek 8854 Quincy requires handing when a lever is selected, and the pair is ordered right hand or left hand. The Omnia D12036PD is specified instead by its 5-1/2 inch center to center plate dimension for its double dummy lever set. When you are cross-quoting the two, the 8854 order needs the hand of the door confirmed along with the knob or lever style, while the D12036PD order turns on getting the center to center spacing right for the plate.

Strictly mechanical. The Quincy 8854 is a tubular, non-electronic dummy set with no motor, no keypad, and no wiring. Nothing to power and nothing to commission.