Emtek 8013 Modern 9" Non-Keyed Sideplate Lockset, Dummy (Pair) - Brass Tubular

It's a dummy set, so there's no latch and no moving mechanism. The knobs or levers are fixed in place and the 8013 mounts on the surface of the door with no bore or door prep required. Use it on a closet door, a false door, or the inactive leaf of a pair where the door is held by a catch or a roller. If you need the door to latch shut, you need a passage set instead.

Yes. The 8013 covers 1-3/8 inch through 1-3/4 inch doors, which spans older interior doors and standard modern ones. Because it surface mounts, there's no cross-bore or 2-3/8 versus 2-3/4 backset decision to make; the sideplate sits on the face of the door. There is a door thickness field on the order so you can state your actual thickness.

Sold as a complete set with a plate and trim for both faces of the door, and the knob or lever is included. You pick the style when you order, from the full Emtek brass knob and lever range, so nothing is bought separately to finish the set.

Handing is required when you choose a lever, because a lever has to point toward the latch edge and can't be flipped on a sideplate. Right hand and left hand are the two choices. If you pick a knob, the shape is symmetrical and handing isn't a fit issue. Stand outside the door, and the side the hinges are on is the hand.

That's the usual reason to buy one. The 8013 is a 9 inch Modern sideplate in the same brass family, in six finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL), and Satin Brass (US4). Order the same knob or lever style and the same finish as the working doors and the closet or false door reads identically.

The Omnia D12036PD is the near equivalent. Both are non-keyed dummy sets with sideplates and no working latch, so both mount to the door face and give a lever or knob that stays fixed. The Emtek 8013 is a brass tubular dummy pair on a 9 inch sideplate; the Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center to center spacing. Because the plate lengths and hole spacing differ, they are not interchangeable in the same prepped door face without re-drilling, and mixing the two on adjacent doors in one opening will not visually match.

The Emtek 8013 is a dummy set, so it has no latch and no cylinder; it is trim only, for closet, pantry, french and inactive doors. For a sideplate lever set that locks, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is the double cylinder version. Single cylinder takes a key outside and a turn inside; double cylinder takes a key on both faces, which matters on a door with glass beside it but which some occupancy codes restrict on egress doors. Confirm your local code before specifying the double cylinder.

It's a residential product. Brass construction, Modern contemporary styling, dummy function. For apartment interiors, model units, and single family work it's on point; for a high traffic commercial opening on a maintenance schedule, spec a commercial line instead.

A dummy set has no cylinder and no bolt, so it's trim only. The keyed versions of this format do something different: the Omnia D12036A is a single cylinder deadbolt lever lockset, and the D12036AC is a double cylinder version, both of which actually secure the door. If your opening needs to lock, one of those is what you're after. If you only want the look on a door that doesn't lock, the 8013 dummy is the correct part.

The Omnia D12036PD is a solid brass double dummy deadbolt lever lockset with plates, 5-1/2 inch center to center, so it carries a dummy deadbolt in the plate as well as the lever. The Emtek 8013 is a 9 inch Modern brass sideplate with the lever or knob only. Pick on whether you want the deadbolt profile in the trim and on which plate length suits the door.

No. The two look alike on the door face, both being solid brass sideplate lever sets, but they are different functions. The Emtek 8013 is a dummy, surface mounted with no door prep required and no bolt behind it. The Omnia D12036A is a single cylinder deadbolt lever lockset, which means a bolt, a strike in the jamb and a keyed cylinder, all of which need prep the dummy opening does not have. Swapping a dummy for the D12036A means boring the door and mortising the jamb; swapping the other direction leaves an unfilled bolt hole and strike pocket.

The Emtek 8013 is the simpler order for the inactive leaf. It is a non-keyed dummy pair in brass, surface mounted with no door prep required, so the fixed leaf needs no bore, no bolt and no strike. The Omnia deadbolt sideplate sets, the D12036A single cylinder and D12036AC double cylinder, carry a working bolt and cylinder that a fixed leaf has no use for. If both leaves need to look identical and only the active leaf locks, pair an Emtek 8013 dummy on the inactive side and a locking set on the active side, keeping the same finish family across both.

Yes. The trim choice is open across the Emtek range, including crystal knobs like Bristol (BL), Modern Disc (MDC), Modern Square (MSC), and Windsor (WS), and the marble options such as L-Square White Marble (LS.MRWH) and T-Bar White Marble (TA.MRWH), alongside the plain brass knobs and levers. The plate itself stays brass in whichever of the six finishes you pick.

The Emtek 8013 is the one built around trim selection: it is ordered with the inside knob or lever style called out separately, covering levers such as Stuttgart, Athena, Luzern and Coventry, knobs such as the Ace, Orb, Round and Square, and crystal knobs such as Bristol and Windsor, across six finishes including Oil Rubbed Bronze US10B, Satin Nickel US15, Flat Black US19, Polished Chrome US26, Unlacquered Brass US3NL and Satin Brass US4. The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates, supplied as a lever set. For a fleet where every door must carry the same handle shape in a specific finish, the 8013 lets you fix one lever or knob style and repeat it; note the Emtek 8013 is designated residential, so confirm it suits any door in the property held to commercial hardware requirements.