Emtek Art Deco Cabinet Pull, Schaub Collection

Two spacings are orderable on the Art Deco pull: 3-1/2 inch and 4 inch center to center. Measure hole to hole on your existing drawer front and match it exactly, since the pull mounts through two bores at fixed spacing. The Art Deco design as a whole is offered from 3 inch up to 12 inch center to center.

Only if the old pull is on the same hole spacing. At 3-1/2 or 4 inch center to center this drops straight onto the two most common drawer bore patterns with no new drilling. If your current pull is 3 inch ctc, the holes will not line up and you would be filling and re-boring the fronts.

The Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch solid brass bar pull, so it lands on the same hole spacing as the 3-1/2 inch Art Deco pull and keeps the brass material. The difference is styling: the Emtek Art Deco pull is an Art Deco design in brass, while the SBP35 is a modern square bar profile. If the existing drawer holes are already bored at 3-1/2 inch, either drops into the same two holes.

The Omnia 1968/102 is a forged solid brass cabinet pull with 4 inch center-to-center spacing, matching the 4 inch hole spacing of the Emtek Art Deco pull while presenting a modern profile rather than an Art Deco one. Both are brass, so they finish out similarly in a kitchen where some runs stay Art Deco and others go modern.

The Emtek Art Deco cabinet pull is a residential item. For casework in a commercial building, Trimco drawer pulls are the usual path: the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center, which covers both of the Art Deco pull's hole spacings, and the Trimco 553 Series is a 3 inch center-to-center drawer pull.

No. The Schaub 10010, 10011, and 10012 are edge pulls, mounted on the edge of a door or drawer front rather than face-mounted like the Emtek Art Deco cabinet pull. They are solid brass and come in 3 inch, 4 inch, and 5 inch center-to-center respectively, so the 4 inch 10011 shares a hole spacing with the 4 inch Art Deco pull, but the mounting location and the bore pattern are different. Use them where a flush edge grip is wanted, not as a face-pull replacement.

Yes, mounting screws ship with the pull. Nothing else is needed for a standard drawer front, though on unusually thick fronts or a doubled-up panel you may need longer machine screws than the ones supplied.

Six finishes across both sizes: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26) and Satin Brass (US4). If you are matching door hardware elsewhere in the room, order by the US code rather than the finish name.

Brass, both the substrate and the stated material. That matters for finishes like Oil Rubbed Bronze and Satin Brass, which live on the metal rather than a painted shell, and it is why the pull holds up to repeated hand contact on a heavily used drawer bank.

Emtek lists the Art Deco pull as residential. For apartment kitchens, millwork, and unit turns it is the right class of hardware. For a high-abuse commercial casework spec, look at a heavy-duty option such as the Deltana SBP35 modern square bar pull in solid brass at 3-1/2 inch ctc.

Part numbers run on the Schaub SPC864 base with a size digit and the finish code. The 3-1/2 inch pull is SPC86422 (for example SPC86422US10B in Oil Rubbed Bronze, SPC86422US15 in Satin Nickel) and the 4 inch is SPC86423 (SPC86423US10B, SPC86423US26 in Polished Chrome).

No. The Art Deco pull is sold in imperial spacings, 3-1/2 and 4 inch center to center. For European-bored frameless boxes on 96mm, the Trimco 562 Series drawer pull lists 3-1/2 inch, 4 inch and 96mm ctc options.

Knobs are single-hole and will not reuse the two-hole bore of the Emtek Art Deco pull, so plan on drilling fresh. Orca Hardware offers round cabinet knobs in the Bachelor Collection at 1-1/4 inch diameter in both plain round, CK-15030, and round ring, CK-16030, plus a square knob in the Blackcomb Collection, CK-17025, at 25mm diameter. Mixing knobs on upper doors with pulls on drawers is common, but the knob bore will not line up with either the 3-1/2 inch or 4 inch pull spacing.

Omnia publishes projection on several of its modern cabinet pulls: the 1969 and the 1971 are forged solid brass with 1-3/16 inch projection, and the 1970 is forged solid brass with 1-1/4 inch projection. All three share the brass construction of the Emtek Art Deco pull. If you are working next to an adjacent cabinet door or an appliance panel where knuckle clearance is tight, those published projections let you size the standoff before ordering.

The Emtek Art Deco cabinet pull is sized for cabinetry, with center-to-center spacings of 3-1/2 inch and 4 inch. For an appliance panel you want a longer grip: the Schaub 79-8 Steamworks 8 inch pull is an appliance pull, and the Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish. Either gives a full-hand grip a 4 inch cabinet pull will not.