Emtek Arts & Crafts Leversets - Hammered Lever, Dummy (Pair)

No boring needed. The hammered lever dummy pair is surface mount, so it screws to the face of the door with no cross bore, no latch bore, and no strike prep. That is what makes it the usual pick for a closet door, a false door in a pair, or an inactive leaf where nothing has to latch. If the door already has a 2-1/8 inch bore in it from an old lock, you want a functioning passage or privacy set instead, because the dummy trim will not cover that hole.

It is a residential lever. For a commercial corridor, a school, or a multifamily common area, a Grade 1 or Grade 2 dummy trim is the better spec: the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim, and the BEST 7KC Series 1DT is the Grade 2 medium duty equivalent. Emtek's hammered lever is aimed at residential interiors and custom homes where the finish and the Arts and Crafts styling are the reason for the choice.

A lever is a shaped handle, so it has to point toward the hinge side to sit right on the opening. The Emtek hammered dummy pair is ordered Left Hand or Right Hand. Stand on the outside of the door (the side you push): if the hinges are on your left it is left hand, hinges on the right it is right hand. Get it backwards and the lever throws the wrong way. Since this is a pair, both faces are covered by the one order.

The Emtek Arts and Crafts Hammered lever dummy is a residential brass set, so for a heavy-traffic opening the BEST 9K Series 1DT single dummy trim lever is the commercial-duty counterpart: it is a Grade 1, heavy duty, non-keyed dummy trim. The Accentra 455LN Augusta is another heavy duty Grade 1 dummy cylindrical lever lock. Both hold the same dummy function - a fixed lever pull with no latch - while carrying a Grade 1 rating.

A dummy lever is surface mounted with no door prep and does not latch, so if the door has to stay closed you need a passage lockset instead. The Baldwin Estate 5103 passage lever with the 5048 rose keeps the same decorative lever family, and the Callan Asheville is a Grade 3 passage leverset. On the commercial side the Falcon B101 is a Grade 2 medium duty passage lever and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage lever that carries a fire rating.

No. A dummy pair is surface mounted with no latch, which does not latch a fire door. The Falcon K101 is a Grade 1 heavy duty passage lever that carries a fire rating for 1-3/8 to 2-1/4 inch doors, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage lever with a fire rating for 1-3/4 to 2 inch doors. Use one of those on a rated opening and keep the Emtek dummy for closet, pantry, and inactive-leaf doors.

Three rose styles: the Arts & Crafts rosette, the Hammered rosette, and the Quincy rosette. All three come in every finish offered, so the rose is a pure look decision. Emtek also allows the hammered lever with any brass rosette, so if you are matching roses already hung elsewhere in the house you can keep the trim consistent across the openings.

Four finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), and Unlacquered Brass (US3NL). All four are available on all three rose styles and in both handings. The set is solid brass from the Emtek brass collection, so it matches the finish behaviour of other Emtek brass trim. Unlacquered brass is the one to think about: with no lacquer it will darken and patina with handling, which is the point of it, but it will not stay bright like the plated finishes.

Yes, a split finish can be specified at the time of order, and there is a comments field for anything else the fabrication needs to know. That is worth using when the two sides of the door face rooms with different hardware finishes, which is common on a butler pantry or a closet that opens into a differently trimmed space.

A passage set has a working latch: the lever turns, the latch retracts, and the door stays closed until you operate it. A dummy has no latch and no moving mechanism at all, so the door needs a roller catch, a ball catch, or magnets to hold it shut. Emtek's hammered dummy is surface mount for exactly that reason, no bore is required. If you need the door to latch, look at a passage function set such as the Falcon B101 Grade 2 cylindrical passage lever or the Hager 2510 Grade 2 passage lever.

That is one of the standard uses. On a pair of doors, the inactive leaf is usually held by flush bolts at the head and sill and needs trim that does nothing mechanically, which is exactly what a surface mount dummy is. Order the pair set so both faces of the inactive leaf are trimmed, and match the handing to that leaf. On a single door, dummy trim is typically used on closets and false fronts held by a ball catch.

A dummy lever is non-keyed and does not lock, so a bath or bedroom door needs a privacy function. In the same decorative lever family the Baldwin Estate 5103 privacy lever with the 5048 rose covers it. The Kwikset 300BRNL RDT Breton privacy lever set is a Grade 3 privacy option for door thicknesses of 1-3/8 to 1-3/4 inch, and the Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for 1-3/8 to 2 inch doors.

They share the dummy function but not the build. The BEST 7KC Series 1DT single dummy trim is a Grade 2, medium duty, non-keyed commercial lever, while the Emtek Arts and Crafts Hammered dummy is a residential brass decorative set offered with Arts and Crafts, Hammered, and Quincy rosettes in Oil Rubbed Bronze, Satin Nickel, Flat Black, and Unlacquered Brass. If the finish and rosette have to match other decorative openings, the commercial trim will not carry that appearance.

The Emtek Arts and Crafts Hammered dummy covers doors from 1-3/8 to 1-3/4 inch. For a 2 inch door, the Hager 2510 Grade 2 passage lever and the Deltana 6201 Manchester lever entry both cover 1-3/8 to 2 inch, and the Falcon K101 Grade 1 passage lever covers 1-3/8 to 2-1/4 inch. Those are latching functions rather than dummy trim, so confirm the opening needs a working latch before switching.

It does not - it is a non-keyed, non-electronic dummy set with no locking function. If the opening needs keyless access instead, the Lockey 2835 mechanical pushbutton keyless lever lock has a passage function and covers 1-3/16 to 2 inch doors, and the Delaney LP250 is a Grade 2 electronic keypad leverlock. Those replace the dummy entirely rather than adding to it.

Neither. It is non-keyed with no cylinder and no keyway, so there is nothing to key or to add to an existing keying system. It is also purely mechanical, no wiring, no batteries.

The Deltana lever entry line runs several designs - the 5851 Claremont, the 6201 Manchester, the 6411 Morant, and the 6431 Linstead, with the 6201, 6411, and 6431 covering 1-3/8 to 2 inch doors. Baldwin Estate 5103 with the 5048 rose is available in dummy, passage, and privacy so a whole floor can be trimmed from one design. The Emtek Arts and Crafts Hammered lever is a brass set with a choice of Arts and Crafts, Hammered, or Quincy rosette.