Emtek Classic Brass Key In Knobset - Rope Knob with Rosette Options - Single Cylinder

The Rope knob keyed entry set covers 1-3/8 inch to 1-3/4 inch doors, so an older 1-3/8 inch door is fine. Emtek builds to a standard 1-3/4 inch door unless you say otherwise, so if your door is thinner or thicker than that, put the actual thickness in the door thickness field when you order. Door prep is a 2-1/8 inch cross bore, which is the same bore almost every modern residential knob uses.

Yes. Backset is a required choice at order time, 2-3/8 inch or 2-3/4 inch. The 2-3/8 inch latch is the standard ship, so pick 2-3/4 inch explicitly if that is how your door is bored. Those are the only two backsets used on residential bored doors, and getting it wrong means the latch will not line up with the edge bore.

No, and that is worth settling before you order 40 of them. The Rope knobset is a residential tubular lock. High traffic multi-family and commercial openings want a Grade 1 or Grade 2 cylindrical lock, and there are graded knob options for that: the BEST 8K Series is Grade 1 heavy duty entrance function, the Corbin Russwin CK4851 is an entrance/office cylindrical knob covering 1-3/8 to 2 inch doors, and the Sargent 8XG04 is a Grade 1 storeroom knob on a 2-3/4 inch backset. Use the Emtek where the look is doing the work, on unit entry doors and owner residences.

The prep lines up: 2-1/8 inch cross bore and a 2-3/8 or 2-3/4 inch backset are the same bored-door prep a Kwikset 400P Polo entry knob uses on a 1-3/8 to 1-3/4 inch door, so the holes in the slab carry over. Your keys will not, unless you take the Weiser WR5 keyway option, since a Kwikset key blank will not run in a Schlage C cylinder. The rose diameter differs from the outgoing trim, so expect a slightly different footprint on the door face.

The Emtek Rope knobset ships with a Schlage C keyway as standard and can be ordered with a Weiser (WR5) keyway instead, which keys into an existing Weiser system with no upcharge for the cylinder substitution. If the building is on a Kwikset keyway, the Cal-Royal BER00 is a Grade 3 entrance/office knob lock supplied with a Kwikset keyway, for doors 1-3/8 inch to 1-3/4 inch.

The Emtek Rope knobset is built for a standard 1-3/8 inch to 1-3/4 inch door and a thicker door must be specified when ordering. If you would rather order a lock that covers 2 inch doors as standard, the Deltana 6171 Round knob entry and Deltana 3381 Egg knob entry cover 1-3/8 inch to 2 inch, and the Corbin Russwin CK4851 keyed entrance/office knob lock covers the same 1-3/8 inch to 2 inch range. The Falcon X101 reaches 1-3/8 inch to 2-1/4 inch but is a passage function knobset with an interchangeable core, not a keyed entrance lock.

The Kwikset 400P-CP Polo keyed entry knob is a keyed entrance knob covering the same 1-3/8 inch to 1-3/4 inch door thickness range as the Emtek Rope knobset, and it is a Grade 3 lock supplied with a round corner adjustable latch and round corner strike. The Emtek Rope knob is a solid brass entrance knobset with a single cylinder, offered with Schlage C or Weiser (WR5) keyways and a choice of rosettes. The Kwikset arrives preconfigured as one keyed entry set; the Emtek is specified by rosette, finish, backset and keyway.

No. The Emtek Rope knobset is an entrance function lock, which means the outside knob can be left unlocked from the inside. For a storeroom function, where the outside knob stays locked and a key is always required, the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet single cylinder knob lock with a 2-3/4 inch backset, and the Sargent 6G04 is a Grade 2 storeroom/closet knob lock with a single cylinder. For a classroom function, the Dexter C2000 Series classroom cylindrical ball knob lock is a Grade 2 keyed classroom lock for 1-3/8 inch to 1-3/4 inch doors.

Dummy trim is the common mix-up. The BEST 6K Series single dummy trim, the Schlage A170 single dummy trim, and the Omnia 458/0 single dummy knob latchset are all knobs with a rose and no latch mechanism, mounted as a pull. The Emtek Rope knobset is a keyed entrance lock with a single cylinder and a latch, so it operates the door. Exit device trim is the other one: the Sargent 28C-KNOB is knob and rose trim for an exit device rather than a standalone bored lock.

Single cylinder means a key outside and a thumbturn or button inside, no key needed to get out. That is the normal choice for a front or side entry door. Where there is glass within reach of the inside of the lock, a lot of jurisdictions push you away from any key-operated inside function anyway, and a single cylinder knob is the compliant, no-key-inside option. This is a residential-duty entry lock, not a commercial storeroom lock.

No. Handing is called out for leversets, not knobs. A round knob is symmetrical, so left or right hand door makes no difference to the trim. You still need the latch backset right, and the strike prep on the jamb has to match your existing frame.

Four rosettes: Classic Brass #8, Rectangular, Regular, and the Rope rosette (that one runs in a reduced finish range). Seven finishes: French Antique US7, Oil Rubbed Bronze US10B, Pewter US15A, Polished Brass Lifetime US3, Polished Chrome US26, Satin Nickel US15, and Unlacquered Brass US3NL. There is a split finish field on the order if you want the exterior in one finish and the interior in another, which is how people match a bronze exterior to nickel interior hardware.

The Rope set covers the keyed entry opening only, single cylinder. For the non-keyed openings in the same house, other solid brass traditional knobs we carry include the Baldwin Estate 5011 Colonial passage knob with the 5058 rose, the Baldwin Estate 5077 Bethpage privacy knob on an R027 rose, and Omnia's 434/PA egg knob latchset and 434/0 single dummy in solid brass. Deltana's 6112 St. Thomas privacy knob covers 1-3/8 to 2 inch doors if you have a thicker slab somewhere in the house.

Yes, keyed alike is a required selection at order, so all the entry sets on one property can run on a single key. There is also a key-to-code field, which is how you get new cylinders cut to a code your existing locks already use rather than rekeying everything. Pick keyed different instead if the doors need to stay on separate keys.

Yes, for a decorative keyed entry knob. The Deltana 6901 Portland knob entry set covers 1-3/8 inch to 1-3/4 inch doors, the same range the Emtek Rope knobset covers. The Deltana 3381 Egg knob entry and Deltana 6171 Round knob entry are entry function knobs that cover 1-3/8 inch to 2 inch doors, so they reach thicker slabs. The Emtek Rope knob is the one that offers Schlage C or Weiser (WR5) keyways and four rosette choices.

The Emtek Rope knobset is a solid brass traditional knob configured by rosette, finish, keyway and backset. If you want a keyed entry knob that ships as a single configured part, the Master Lock BC Series biscuit knob is a Grade 3 keyed entry lock, the Callan Edgewood is a Grade 2 entrance knobset, and the Delaney Belton and Delaney Galway are Grade 3 entrance knobsets. The Schlage Residential F500 Plymouth with Georgian knob comes as a combo pack with adjustable backsets and dual strikes for 1-3/8 inch to 1-3/4 inch doors.

For a fire rated opening, the Falcon W101 Grade 2 cylindrical knob lock carries a fire rating and is a passage/closet latch function with a 2-3/4 inch backset, and the Falcon X101 Grade 1 heavy duty cylindrical passage knobset with interchangeable core is also fire rated. Both are passage function, so pair them with the door's other required hardware. The Emtek Rope knobset is a residential brass entrance knobset.

Both are traditional solid brass knob programs. The Baldwin Estate 5000 Baltimore knob comes preconfigured: the passage version pairs the 2 inch knob with a 5048 rose, and the privacy version uses a 5148 rose, both with a 2-3/8 inch backset and a full lip strike. The Baldwin Estate 5077 Bethpage knob with R027 rose is a privacy function set. The Emtek Rope knobset is the keyed entrance member of that kind of family, ordered with a 2-3/8 inch or 2-3/4 inch backset and a choice of rosette and finish.

The Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function, covering doors from 1 3/16 inch to 2 inch. It opens on a code rather than a key, so there is nothing to rekey when a tenant or crew changes. The Emtek Rope knobset is a keyed single cylinder entrance lock, ordered on a Schlage C or Weiser (WR5) keyway and available keyed alike across a set of doors.

Solid brass, both the substrate and the stated material, from Emtek's Classic Brass collection. That matters for the unlacquered US3NL option in particular, since an unlacquered brass finish is meant to patina over time as the raw brass ages, which only works on brass through and through. The style is traditional, meant to sit with period trim rather than contemporary.

The Dexter C2000 Series entry/office cylindrical ball knob lock is a Grade 2 keyed, non-clutching lock for doors 1-3/8 inch to 1-3/4 inch, with a ball knob. The Emtek Rope knobset covers the same 1-3/8 inch to 1-3/4 inch door range and is a keyed single cylinder entrance lock in brass, with a rope-pattern knob and four rosette choices in finishes from Oil Rubbed Bronze to Unlacquered Brass. The Dexter is one fixed configuration; the Emtek is built to the trim you specify.