Emtek Designer Brass Leverset - Coventry Lever, Dummy (Pair)

No prep needed. The Coventry dummy lever is surface mounted, so it screws to the face of the door without a cross bore or latch bore. That makes it the usual choice for a closet door, a false door leaf, or an inactive leaf of a double door where nothing has to latch.

The Coventry lever is a shaped lever, not a symmetrical one, so it points a particular direction once mounted. You order it left hand or right hand depending on which way the lever needs to sweep on that leaf. On a pair set, you are getting two levers, one for each face of the opening.

Yes. The Coventry lever can be ordered with any Emtek brass rosette, and the choices are #8, Lancaster, Oval, Quincy, Rectangular, Regular, Ribbon and Reed, Rope, Watford and Wilshire. Pick the same rosette and finish used on the passage and privacy sets elsewhere and the closet or inactive leaf will read the same.

Neither. Dummy means there is no latch, no spindle action, and no cylinder. The lever is fixed and serves as a pull. For a door that needs to hold closed, order a passage set; for a bath or bedroom, a privacy set. Within the same Emtek brass leverset family you would specify passage or privacy rather than dummy.

The Emtek Coventry dummy leverset is a brass residential design. For a commercial specification, the BEST 9K Series 1DT single dummy trim cylindrical lever is Grade 1 heavy duty and non-keyed, and the BEST 7KC Series 1DT single dummy trim lever is Grade 2 medium duty. The Accentra 455LN Augusta is another Grade 1 single dummy cylindrical lever lock in the 5400 Series.

The Emtek Coventry dummy leverset is sold as a pair, one lever for each face of the door. If you only need one face trimmed, the Baldwin Estate 5103 half dummy lever with 5048 rose is a single-lever decorative option and is ordered by hand, as the left hand 5103 half dummy or the right hand 5103 half dummy. The Emtek Coventry is also ordered by hand, left hand or right hand, but supplies both levers in one set.

The Coventry dummy is a non-keyed dummy function, so it is pull trim only with no latch. For a latching hall or closet door in a comparable decorative style, the Baldwin Estate 5103 passage lever with 5048 rose is a passage function. For a bed or bath door that needs a thumbturn, the Baldwin Estate 5103 privacy lever with 5048 rose is a privacy function.

The lever projects 2-1/2 inches from the door surface and 2-1/8 inches from the rosette, with 1-1/4 inches of clearance between the back of the lever and the door face. Lever width is 4-5/8 inches, so allow for that when the door sits close to a return wall or casing.

Seven: French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered brass is the one that will patina over time rather than hold its shine, so keep that in mind if you are matching it to lacquered pieces already installed.

No. The Emtek Coventry dummy is surface mounted with no door prep required and has no latch. Passage leversets such as the Arrow GL01 Sierra lever or the Falcon B101 non-handed passage lever are cylindrical locks that require a bored door with a latch and strike prep. Substituting one for a dummy opening means boring the door.

The Emtek Coventry dummy is a brass designer leverset offered in ten rosette styles and finishes including Oil Rubbed Bronze US10B and Satin Nickel US15. If the look is not the deciding factor, the Callan Bentley dummy lever is a Grade 2 dummy with a single trim style, and the BEST 7KC Series 1DT single dummy trim lever is a Grade 2 medium duty option.

The Emtek Coventry dummy pair covers doors 1-3/8 inch to 1-3/4 inch thick. For a 2 inch door, the Hager 2510 passage lever covers 1-3/8 inch to 2 inch, and the Deltana 6201 Manchester lever entry covers 1-3/8 inch to 2 inch. Those are latching functions rather than dummy trim, so confirm the function suits the opening.

Yes, split finish is available as an optional entry on the order. If you want, say, oil rubbed bronze facing a hallway and polished brass facing a room, note the two finishes in the split finish field when ordering.