Emtek Designer Brass Leverset - Elan Lever, Privacy Set

Yes. The Elan privacy leverset drops into standard door prep, a 2-1/8 inch cross bore, and covers doors from 1-3/8 inch up to 2-1/4 inch thick. Standard commercial and most residential doors are 1-3/4 inch, so it lands in the middle of the range. One exception on prep: if you pick the STRETTO rosette, the thumbturn needs a 1-1/4 inch diameter bore and a 2-hole door preparation instead, so that one is not a straight drop-in on existing prep.

It ships as a complete set, latch and strike plate included. What you do have to call out is the backset: the standard latch is for a 2-3/8 inch backset, and you specify 2-3/4 inch if that is what your door is bored for. Latch faceplate comes round corner or square corner, so match it to the mortise already cut in the door edge.

Measure from the door edge to the center of the bore hole. 2-3/8 and 2-3/4 inch are the two backsets in play, and both are offered on the Elan; the backset is a required selection when you order. If you are replacing an existing lock, the hole is already cut, so measure it rather than assuming, then pick the matching backset.

That is exactly its function. Privacy/bed/bath means it locks from the inside with a thumbturn and has no key cylinder, so it is non-keyed. Use it on bedrooms, bathrooms, and any interior door you want to secure from within but never need to key. If you want the same lever on a hall or closet door with no locking at all, that is a passage function instead, and if you need a keyed exterior door, this is not the set.

The Baldwin Estate 5103 Privacy Lever with 5048 Rose is the nearest match. Both are privacy/bed/bath lever locks with a decorative rose, so both cover the same interior bedroom and bathroom openings. The Emtek Elan is a brass privacy set that fits doors 1-3/8 inch to 1-3/4 inch with a 2-1/8 inch cross bore and an adjustable 2-3/8 inch or 2-3/4 inch backset, and the rose is selectable across ten rosette styles including Lancaster, Oval, Quincy and Ribbon & Reed. The Baldwin 5103 privacy set comes with the 5048 rose as its trim.

The Emtek Elan privacy leverset is a residential brass lever set. For a graded commercial privacy opening, the Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever and a 1-3/8 inch to 2 inch door thickness range, and the Arrow MK02-TA is a Grade 1 privacy cylindrical lock with a Tudor knob, fire rated, for doors 1-3/4 inch to 2 inch. The Arrow uses a knob rather than a lever, so where a lever is required by ADA-style facility standards the Hager is the one that keeps the lever.

CF gives you rosettes with no exposed screws, so the trim reads clean with nothing visible on the face of the rose. It includes the 28 degree rotation latch as part of the option. The three latch choices are standard latch, the 28 degree rotation latch on its own, or CF with the 28 degree latch bundled. Pick CF if the finish detail matters on a visible interior door; standard latch is fine where it does not.

The Elan lever can be ordered with any brass rosette, and ten shapes are on offer: #8, Lancaster, Oval, Quincy, Rectangular, Regular, Ribbon and Reed, Rope, Watford, and Wilshire. Seven finishes run across the range, French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Satin Nickel (US15), and Unlacquered Brass (US3NL). If you want the interior and exterior sides in different finishes, there is a split finish option to specify when ordering. That is how you keep one lever design consistent while matching the trim on each opening.

Solid brass, both the material and the substrate, from Emtek's Brass collection. It is a tubular cylindrical lock built for residential use. For a commercial opening that needs a graded lock, look at a Grade 2 privacy lever like the Hager 2540 with the Withnell lever, or a Grade 1 privacy such as the Arrow MK02-TA, which is a knob rather than a lever. The Emtek is the choice when appearance and finish drive the decision on an interior residential door.

The Baldwin Estate 5103 privacy lever with the 5048 rose is the closest peer in the designer decorative category, same privacy/bed/bath function, different lever and rose design. For a lighter-duty residential option there is the Kwikset 300BRNL Breton privacy lever set, Grade 3, rated for 1-3/8 to 1-3/4 inch doors. The Emtek is the one to hold onto if you want the rosette and finish combination to match other Emtek trim in the building.

Yes, up to 2-1/4 inch thick. There is a door thickness field to fill in when you order, so state the actual thickness and the set is supplied to suit. Below the range, 1-3/8 inch is the floor, which covers older interior doors. If you are outside that entirely, a Falcon K101 passage lock handles 1-3/8 to 2-1/4 inch and the Lockey 1150 keypad lever set goes down to 1-1/8 inch, though neither is a decorative brass privacy set.

The Emtek Elan privacy leverset is ordered as Left Hand (LH) or Right Hand (RH), so the handing of the opening has to be confirmed before the order goes in. Among comparable levers, the Baldwin Estate 5103 half dummy is likewise split into a left hand and a right hand part number. By contrast the Falcon B101 Grade 2 passage lever and the Falcon K101 Grade 1 passage lever are non-handed designs, and the Kwikset 200DL Delta passage lever is reversible, so a single part number covers either swing on those.

A closet or hall door does not need a privacy function, so the match there is a passage or dummy lever in the same decorative family. The Baldwin Estate 5103 is offered as a passage lever with the 5048 rose, and as a left hand and right hand half dummy with the same rose, so a bedroom-privacy plus closet-passage plus dummy-on-the-inactive-leaf set can be built out in one design. The Emtek Elan privacy set itself is a privacy/bed/bath lock and is non-keyed.

The Kwikset 300BRNL RDT Breton Privacy Lever Set is the builder-grade equivalent. It is a Grade 3 privacy lever for doors 1-3/8 inch to 1-3/4 inch, which is the same door thickness range the Emtek Elan brass privacy set covers. The Emtek is a brass set with a selectable rosette and seven finishes including Oil Rubbed Bronze (US10B), Satin Nickel (US15) and Unlacquered Brass (US3NL); the Kwikset ships with the Breton lever and round trim as a fixed configuration.

No, not for a bedroom or bathroom door. The Bravura Miramar, Atlanta, Orlando and Tampa leversets are all Grade 2 passage function, meaning the lever always retracts the latch and there is no locking. The Emtek Elan set is a privacy/bed/bath lock, which locks from the inside. Those Bravura levers substitute for a passage opening, not for the privacy openings the Elan is bought for.

They solve a different opening. The Deltana 5851 Claremont and 6201 Manchester are entry function levers, and the Manchester, 6411 Morant and 6431 Linstead all list a 1-3/8 inch to 2 inch door thickness range. Entry function means a keyed exterior side. The Emtek Elan is non-keyed with a privacy/bed/bath function and a thumbturn arrangement, which is what an interior bedroom or bathroom door takes rather than an exterior or unit entry door.

The Emtek Elan is a residential brass privacy leverset with a tubular lock, sold in seven finishes and ten rosette styles, so it is chosen where the look of the guest room door matters. Where a facility standard calls for heavy duty commercial hardware across the same corridor, the Falcon K101 is a Grade 1 heavy duty passage lock, fire rated, covering 1-3/8 inch to 2-1/4 inch doors, and the Falcon T101 is a Grade 1 heavy duty passage lever; the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy from the 5400 Series and the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim, both for the non-latching leaves.

No. The Lockey 1150 and Lockey 2835 are mechanical keypad keyless lever locks with passage function, meaning the code releases the lever and there is no inside privacy locking; the 1150 covers 1-1/8 inch to 2 inch doors and the 2835 covers 1 3/16 inch to 2 inch. The Emtek Elan is a non-electronic privacy/bed/bath set that locks from the occupied side, which is the behavior a bedroom or bathroom door needs. A keypad lever is the answer for a controlled door such as an office or storage room, not a restroom.

The Emtek Elan privacy set ships with a standard latch for a 2-3/8 inch backset and is ordered with a 2-3/4 inch backset when the door is prepped that way. Among comparables, the Cal-Royal AG03 classroom lever is specified at a 2-3/4 inch backset and the Cal-Royal AG00 entrance lever at 2-3/8 inch, so those are fixed to one prep rather than selectable. The Lockey 1150S keypad lever set is listed with an adjustable backset.

No, it is fully mechanical, non-electronic, and non-keyed. It works by lever and interior thumbturn, nothing to wire and no battery. If you want keyless code entry on an interior door instead, the Lockey 2835 mechanical pushbutton lever lock or the Delaney LP250 electronic keypad leverlock are the keyless routes.

They are built for different jobs. The Corbin Russwin CL3110 is a Grade 1 vandal resistant cylindrical lever, fire rated, passage/closet function, for doors 1-3/4 inch to 2 inch, so it suits a corridor or closet door taking abuse but does not lock. The Emtek Elan is a residential brass privacy lock for 1-3/8 inch to 1-3/4 inch doors. If the door in question needs to lock from the inside, the CL3110 is not a replacement regardless of duty level.