Emtek E4017 Modern Style Electronic Keypad Entry Set - Dummy
- Can be ordered with any Brass knob or lever
- Sold as a complete set.
- Fits any door between 1-3/4" to 2-1/4" thick
- Handing required if Lever used on inside
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Mount: Surface Mount (no door prep required)
- Material: Brass
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Subcategory:
- Keypad Entry Sets
- Collection:
- Brass
- Product Type:
- Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Electronic:
- Yes
- Series:
- Modern
- Theme:
- Contemporary
- Keyed:
- No
- Reader Type:
- Keypad
- MAP Policy:
- Yes
- Product Attribute:
- Electronic Locks
- Product Model:
- E4017
- Product Function:
- Dummy
- Product Style:
- Contemporary
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek E4017-US26 – Frequently Asked Questions
1) What does the dummy function mean on the Emtek E4017 keypad entry set?
Dummy means it does not latch, lock, or operate anything. The E4017 Modern Style keypad entry set in dummy form is fixed trim: the plate, the keypad face, and the inside knob or lever are all non-operating. It is what you put on the inactive leaf of a pair of doors, or on a door held shut by other means, so the opening matches an active electronic keypad set beside it. There is no cylinder and no key on it.
2) Do I have to specify handing on the Emtek E4017 dummy entry set?
Yes, handing is required, right hand or left hand, and it matters whenever a lever is used on the inside. Levers are handed so the return points toward the hinge side. Pick the hand as you face the door from the side the inside trim sits on. Knobs are symmetrical, but the order still asks for the hand.
3) Does the Emtek E4017 keypad entry set need door prep or boring?
No boring needed. The E4017 is surface mount, so it goes on without cutting a cross bore or latch bore into the door. That makes it workable on a slab that has no existing prep, or on a leaf you do not want to cut into for a piece of trim that will never operate.
4) Can I choose the inside knob or lever on the Emtek E4017, or is it fixed?
You choose it, and the choice is required on the order. The inside trim can be any Emtek brass knob or lever, and the selection list runs from contemporary shapes like the Stuttgart and Helios levers, the Ace and Ace Knurled knobs, and the L-Square, T-Bar and R-Bar series in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through traditional patterns like Cortina, Milano, Turino, Rope, Ribbon and Reed, and crystal knobs including Bristol, Windsor, Georgetown and Old Town. It ships as a complete set with whatever you pick.
5) I need a keypad handleset that actually locks the door, not a dummy - what should I order instead of the Emtek E4017?
The E4017 is a dummy set and does not latch or lock, so it will not secure an active entry door. For a working electronic entry, the Kwikset 815SCEHFL-CP913CNT San Clemente handleset pairs a Halifax lever interior trim with a Contemporary SmartCode keypad electronic deadbolt, ships with an RCAL latch and RCS strike, and is listed for 1-3/4 inch doors. The Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset is another working option, listed for 1-3/4 inch to 2-1/4 inch doors, and uses a touchscreen rather than a keypad.
6) What is a non-electronic dummy handleset alternative to the Emtek E4017 Modern keypad entry set?
The Emtek E4017 is a dummy function set, meaning it is fixed trim for an inactive leaf rather than a latching lock. If the keypad styling is not needed, two mechanical dummy handlesets cover the same job: the Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever and the Weslock 6695 Belmont Dummy Handleset with Impresa Knob, both listed as dummy function with a 1-3/8 inch to 2 inch door thickness range. The Emtek differs in that it carries a keypad reader face and a brass body, and the inside trim is chosen from the knob and lever range at order time.
7) Is the Yale Assure Lock with Ridgefield handleset a substitute for the Emtek E4017 keypad entry set?
They are not interchangeable. The Emtek E4017 is a dummy function set with a keypad face and no latching mechanism, surface mounted with no door prep. The Yale Real Living BYRD226CBARX Assure Lock is a Wi-Fi and Bluetooth touchscreen deadbolt with the Ridgefield handleset, listed for 1-3/4 inch to 2-1/4 inch doors, and the BYRD256 CBARX is a key-free Wi-Fi touchscreen deadbolt with a Ridgefield passage handleset and trim. Those are functioning locks with connectivity; the E4017 is trim for a door leaf that does not operate.
8) If the door needs a keyed cylinder rather than the Emtek E4017 dummy keypad set, what handlesets cover that?
The E4017 has no keyway, so a keyed opening needs a different set. The Schlage Residential F60 Addison single cylinder keyed entry handleset with Accent lever is Grade 2, F Series, for 1-3/8 inch to 1-3/4 inch doors. The Weslock 2810 Hillcrest single cylinder handleset with Hudson knob is listed for 1-3/8 inch to 2 inch doors in the Premiere Essentials series, and the Master Lock HDLBA0615/4D is a Grade 2 single cylinder deadbolt handleset in the HDLB series. Kwikset offers the 687AMD Amador single cylinder handleset as a Grade 3 entrance set with SmartKey.
9) What finishes does the Emtek E4017 Modern keypad entry set come in?
Four: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), and Polished Chrome (US26). If you need the outside plate in one finish and the inside trim in another, there is a split finish option you can specify on the order.
10) Is the Emtek E4017 keypad set solid brass, and is it rated for commercial use?
Brass throughout, both material and substrate, in Emtek's Brass collection. It is a residential product. For a commercial opening with a graded requirement you would be looking at something else, such as the Grade 2 Schlage Residential F60 Addison handleset or the Grade 2 Master Lock HDLB Series handleset, neither of which is electronic.
11) What is a simpler non-keyed handleset if the Emtek E4017 dummy set is more than the opening needs?
The Emtek E4017 is a residential dummy set with an electronic keypad face. For an opening that needs a latch but no key or keypad, the Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry function in the J Series, Grade 2, for 1-3/8 inch to 1-3/4 inch doors. The Schlage is a mechanical latching set with no electronics, while the E4017 is fixed trim with no latch at all.
12) The Emtek E4017 requires handing and an inside knob or lever selection - what handleset avoids those choices?
The Emtek E4017 requires handing when a lever is used inside and requires the inside knob or lever style to be specified as part of the order. Sets that ship with the interior trim already paired remove those decisions: the Baldwin 180WYHXATK Wesley handleset comes with the Alcott knob and the 180WYHXCYK with the Carnaby knob, both entrance function, and the Weslock 1411 Traditionale Colonial handleset arrives with the Eleganti knob as a single cylinder keyed entry for 1-3/4 inch to 2-1/4 inch doors.
13) What handleset should I use instead of the Emtek E4017 when the backset in the existing door is uncertain?
The E4017 is surface mounted with no door prep required, so it does not depend on a bored backset at all. For a door that needs a working latch and where the backset is not confirmed, the Sure-Loc handlesets with adjustable backset cover both cases: the Aspen AN507 single cylinder keyed entry, the Alta AT507 tubular handleset, the Coral CR507, and the Madison MA507 keyed entry. All four are listed as handleset function with an adjustable backset.
14) For a solid brass handleset look without the electronics of the Emtek E4017, what are the options?
The Emtek E4017 is a brass set in a contemporary style with a keypad reader. For solid brass in a mechanical entry set, Deltana offers the 803871B Hanover, the 815871 St. Ann, and the 825871 Kingston, all solid brass entry handlesets, plus the 810871 Montego handleset listed for 1-3/8 inch to 2 inch doors. Those are keyed entry sets rather than dummy trim, and they carry no keypad.
15) Can I use exterior-only handleset trim in place of the Emtek E4017 dummy set?
They serve different purposes. The Emtek E4017 is sold as a complete set including interior trim selected at order time. The Kwikset 687AMD SMT and 687AMD SMC Amador single cylinder handlesets are exterior only, Grade 3 entrance function for 1-3/4 inch doors, with the SMC version keyed to the SC1 keyway. Baldwin's Estates 6542 Tremont mortise trim is another exterior trim approach, offered as single cylinder entry or double cylinder entry for 1-3/4 inch doors, and it requires a mortise lock body behind it rather than a bored prep.
16) What handleset works for a passage door where the Emtek E4017 dummy set would not latch?
The E4017 is dummy trim and holds nothing shut. For a door that must latch and also carry a deadbolt, the Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever, Grade 2 in the JI Series, for 1-3/8 inch to 1-3/4 inch doors. The Pamex FS7P31 Lexington single cylinder handleset is another latching option in the same 1-3/8 inch to 1-3/4 inch thickness range with an entry function.
17) Is the Emtek E4017 style contemporary enough for a modern front entry?
It is Emtek's Modern series, contemporary styling, and the keypad plate is the clean flat-face version rather than the classic profile. Paired with something like the L-Square or T-Bar inside trim in Flat Black or Polished Chrome it reads fully modern; pair it with a crystal or rope knob and it will not.
How fast can I get the Emtek E4017-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek E4017-US26 come with a warranty?
Absolutely. The Emtek E4017-US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek E4017-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek E4017-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.