Emtek E451211 Sandcast Bronze Style Electronic Keypad Entry Set - Single Cylinder

Only if you put a lever on the inside. Handing is required when a lever is used for the interior trim, and right hand or left hand is a required selection on the order. Pick a knob for the inside and handing stops mattering to the trim. Stand outside the door: if the hinges are on your right it is right hand.

The standard latch on the E451211 ships 2-3/8 inch; 2-3/4 inch is available and has to be called out on the order. Measure from the door edge to the center of the existing bore. Both are stocked options, so a retrofit into an existing prep does not need a new hole either way.

Schlage keyway is standard on the E451211 and a Weiser WR5 keyway is available instead. It is a single cylinder set, so the key works the outside only. Keyed alike and keyed different are both order options, and there is a keying-to-code field if you want it cut to an existing bitting. If your other doors are already on SC1, take the Schlage keyway and key the whole house alike.

Sold as a complete set with the latch and strike plate included. What you must still choose is the inside trim, because it is not preselected: pick one of the 25 bronze knobs or levers (Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma levers, or knobs including Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence). Backset, handing and keying are also required selections.

The E451211 is a tubular bored lockset, not a mortise: the keypad drives a single bored latch through a 2-1/8 inch cross bore, with the exterior handle and the interior knob or lever on that same bore. That means one hole set and one point of latching, not a separate handleset plus deadbolt stack. If you want the two-hole arrangement with an independent deadbolt above the handle, the Kwikset 815SCEHFL-CP913CNT San Clemente pairs a handleset with a separate SmartCode electronic deadbolt, and the Yale BYRD226NRRX Assure standalone touchscreen deadbolt comes with the Ridgefield handleset.

The Emtek E451211 Stuttgart keypad entry set is a single cylinder entry handleset with a keypad reader, and it fits doors 1-3/4 inch to 2-1/4 inch thick with a 2-1/8 inch cross bore. If you want a keypad handleset from another maker on a thick door, the Yale Real Living BYRD226NRRX Assure Lock standalone touchscreen deadbolt with Ridgefield handleset covers a 1-3/4 inch to 2-1/4 inch door thickness range, and the Yale BYRD226CBARX Assure Lock adds Wi-Fi and Bluetooth over the same 1-3/4 inch to 2-1/4 inch range. The Emtek reads a keypad and the Yale sets read a touchscreen, so confirm which entry method the resident expects before you commit.

The Emtek E451211 Stuttgart set is electronic, with a keypad on the outside trim. For a mechanical single cylinder handleset instead, the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder set covering 1-3/4 inch to 2-1/4 inch doors, the Weslock 2810 Hillcrest handleset with Hudson knob is single cylinder over 1-3/8 inch to 2 inch doors, and the Schlage Residential F60 Addison with Accent lever is a Grade 2 keyed entry handleset for 1-3/8 inch to 1-3/4 inch doors. All three are key-only, so there are no user codes to program or batteries to service.

The Emtek E451211 is a keypad entry set that stores up to 20 user codes and comes programmed with 2 unique user codes, entered at the keypad on the door. If remote or app control is the requirement, the Yale Real Living BYRD226CBARX Assure Lock touchscreen deadbolt with Ridgefield handleset is a Wi-Fi and Bluetooth product, the Yale BYRD256 CBARX Assure key free touchscreen deadbolt with Ridgefield passage handleset is Wi-Fi, and the Yale BYRD410BLERX Assure Lock 2 key-free touchscreen deadbolt with Ridgefield handleset is Wi-Fi over a 1-3/8 inch to 2-1/4 inch door range. Note that the key free Yale sets pair with a passage handleset rather than a keyed one, so there is no cylinder to key.

They are close in concept and differ in build and fit. The Emtek E451211 is a Sandcast Bronze tubular single cylinder entry set with a keypad, taking a Schlage or Weiser WR5 keyway and fitting doors 1-3/4 inch to 2-1/4 inch thick. The Kwikset 815SCEHFL-CP913CNT San Clemente handleset with Halifax lever interior trim is a Signature Series handleset with a Contemporary SmartCode keypad electronic deadbolt and SmartKey, supplied with RCAL latch and RCS strike, for a 1-3/4 inch door. If your door is over 1-3/4 inch thick, the Emtek range is the one that covers it.

The Emtek E451211 Sandcast Bronze keypad entry set is classified as residential. When the drawing calls out a graded handleset, the Master Lock HDLBA0615/4D single cylinder deadbolt handleset is Grade 2 in the HDLB Series, the Schlage Residential F60 Addison with Accent lever is Grade 2 in the F Series, and the Kwikset 687AMD SMT Amador single cylinder handleset is Grade 3. Match the grade the specification names before you order.

The Emtek E451211 is an entry function set with a single cylinder and a keypad. Several handlesets that photograph almost identically are not entry devices. The Weslock 2815 Hillcrest handleset with New Heaven lever is a dummy function, the Weslock 6695 Belmont handleset with Impresa knob is a dummy function, and the Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry set. Dummy sets are surface mounted trim with no latch action at all, so they suit an inactive leaf, not a door you need to secure.

The Emtek E451211 is a single cylinder set, keyed on the outside with the inside trim being a knob or lever of your choice. Where a glass panel near the door means you want a key on both sides, the Baldwin Estates 6542 Tremont double cylinder entry mortise trim is a double cylinder entrance product for a 1-3/4 inch door, and the matching Baldwin Estates 6542 Tremont single cylinder entry mortise trim covers the same 1-3/4 inch door if you decide single cylinder is enough. Both are mortise trim, so the door must be prepped for a mortise lock body rather than the 2-1/8 inch bored prep the Emtek uses.

Twenty user codes, and it arrives already programmed with two unique secure codes so the door works the day it goes on. For a rental turnover or a crew that rotates, that is enough to give each trade its own code and delete them individually rather than rekeying. Programming steps are in the EMTouch installation and programming guide that ships with it.

It is a residential product. For a leasing office, a clubhouse or anything with commercial traffic, look at graded hardware instead: the Master Lock HDLB Series single cylinder deadbolt handleset is Grade 2, and the Schlage F60 Addison keyed entry handleset with Accent lever is Grade 2 on a 1-3/8 to 1-3/4 inch door. The Emtek suits a house, a custom front door, or a high-end short-term rental.

Yes on both counts. Keyed alike is a free keying option, so a group ordered together shares one key, and you can also supply an existing key code to match doors you already have. Each set stores its own 20 user codes, so you program the same code into each one. All of them come out of the same Sandcast Bronze collection, so finishes match across the openings when you stay in Flat Black Bronze or Medium Bronze.

The Emtek E451211 keypad entry set takes any Bronze knob or lever on the inside trim, and handing only has to be specified when a lever is used inside. If you want a knob interior from another maker, the Baldwin Wesley handleset with Alcott knob and the Baldwin Wesley handleset with Carnaby knob are both entrance function sets, and the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob covers 1-3/8 inch to 2 inch doors. The Emtek is the one of the group that carries a keypad.

The Emtek E451211 is sold as a complete set including the latch and strike plate. When you only need the outside trim, the Kwikset 687AMD SMT Amador single cylinder handleset is an exterior-only Grade 3 entrance set for a 1-3/4 inch door, the Kwikset 687AMD SMC version is the same exterior-only Amador set with an SC1 keyway and SmartKey, and the Kwikset 687BW SMT Belleview is an exterior-only Grade 3 entrance handleset on the same 1-3/4 inch door thickness. Exterior-only sets assume the interior trim already on the door stays.

They serve different openings. The Emtek E451211 is an entry function keypad handleset with a single cylinder on a 2-1/8 inch bored prep, latch and strike included. The Schlage Residential JI18/19 interconnected lock with Torino lever is a passage function lock paired with a keyed deadbolt in the JI Series, Grade 2, for 1-3/8 inch to 1-3/4 inch doors. The interconnected pair retracts latch and deadbolt together from the inside lever, which is a different opening behavior from a handleset thumbpiece, and its lever side does not lock.

The Emtek E451211 keypad entry set is offered with a Schlage keyway as the standard cylinder and a Weiser WR5 keyway as an option, and it can be ordered keyed alike or keyed to an existing code. Among the alternatives, the Kwikset 687AMD SMC Amador single cylinder handleset uses an SC1 keyway with SmartKey. Confirm the keyway on every door in the group before you set the keying schedule.

Two: Flat Black Bronze (FB) and Medium Bronze (MB). It is solid sandcast bronze, not plated, so the finish is on the metal itself and will patina with weather rather than flake. There is also a split finish text field if you want the exterior handle in one finish and the interior trim in the other.

The keypad is what makes the E451211 an electronic set; the bronze exterior handle style is the Stuttgart pattern in the Sandcast Bronze collection. For a purely mechanical entry handleset, the Deltana solid brass handlesets cover the traditional look in entry function (Hanover 803871B, St. Ann 815871, Kingston 825871), and the Weslock 1411 Traditionale Colonial with Eleganti knob is a single cylinder set that takes 1-3/4 to 2-1/4 inch doors.