Emtek Finger Cabinet Pull, Schaub Collection

The Emtek Finger cabinet pull is a brass cabinet pull in a contemporary style. Two brass peers cover similar ground: the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass bar pull at 3-1/2 inch center to center, and the Omnia 1968/102 Modern Cabinet Pull is forged solid brass with 4 inch center-to-center spacing. Both are square/bar profiles rather than the Finger shape, so the visual break is real even though the material matches.

The Emtek Finger cabinet pull is offered in 7/8 inch and 1 inch sizes. Where a deeper grip is wanted, the Omnia 1970 Modern Cabinet Pull is forged solid brass with 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are both forged solid brass at 1-3/16 inch projection. Those three give a stated projection dimension to design the clearance around.

The Emtek Finger is a cabinet pull. For an appliance panel, the Schaub 79-8 Steamworks 8 inch cabinet pull is built as an appliance pull, which is the right function for a refrigerator or range front where the grip length and the panel prep differ from a standard cabinet door.

The Emtek Finger cabinet pull is a residential product. For casework in a commercial building, the Trimco 553 Series drawer pull at 3 inch center to center and the Trimco 562 Series, offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options, are drawer pulls from a commercial door hardware line, and the 562 Series metric option matches Euro-drilled casework.

Drilling drives the substitution here. The Deltana SBP35 Modern Square Bar Pull is 3-1/2 inch center to center in solid brass, and the Trimco 562 Series is offered at 3-1/2 inch among its center-to-center options, so either drops onto existing 3-1/2 inch bores without redrilling the fronts. The Emtek Finger cabinet pull spans 3 inch to 12 inch center to center.

Seven: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Satin Brass (US4), and Unlacquered Brass (US3NL). The US codes are the standard finish designations, so if the other hardware in the room is specified as US15 satin nickel, the Finger pull in US15 is the match. Unlacquered brass is the one to know about, it has no clear coat and will patina with handling.

No, mounting screws ship with the pull. Standard cabinet pull screws are 8-32 machine screws, and if your drawer fronts are thicker than usual (a slab front with an applied panel, for example), you may need longer 8-32 screws than the ones in the bag.

That number is the pull size designation, and it is the axis you choose alongside finish. Both sizes are offered in the same seven finishes: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Satin Brass (US4), and Unlacquered Brass (US3NL). If you are running a whole kitchen, pick one size so the fronts read consistently.

A few solid brass alternatives in the same contemporary lane: the Deltana SBP35 square bar pull at 3-1/2 inch, the Omnia 1968/102 forged solid brass pull at 4 inch center-to-center, and the Omnia 1969, 1970, and 1971, which are forged solid brass with 1-3/16 inch, 1-1/4 inch, and 1-3/16 inch projections respectively. Projection is the number to check if your drawers sit next to a wall or a perpendicular run of cabinets.

The Finger pull reaches 12 inch center-to-center at the top of its range, which is long enough for many integrated appliance panels. If you need a purpose-built appliance pull, the Schaub 79-8 Steamworks 8 inch is catalogued as an appliance pull. Check the hole spacing your panel is drilled for before you commit either way.

For a door or drawer that has to sit flush against something, a surface-mounted bar pull is the wrong shape. Look at an edge pull instead: the Schaub Sabre edge pulls come in 3 inch, 4 inch, and 5 inch center-to-center as the 10010, 10011, and 10012. Those recess or ride the edge rather than projecting into the adjacent surface.

Two things to specify: size (7/8 inch or 1 inch) and finish. The manufacturer numbers follow the pattern, so the 7/8 inch in Satin Nickel is SPC86150US15 and the 1 inch in the same finish is SPC86151US15. Flat Black runs SPC86150US19 and SPC86151US19, Polished Chrome SPC86150US26 and SPC86151US26. The trailing US code is the finish.

Finish codes are the way to line it up. The Finger pull comes in US3NL, US4, US10B, US14, US15, US19, and US26, which are the same finish designations Emtek uses on its knobsets and leversets, so specifying US15 across the door and the cabinetry gets you one satin nickel. Unlacquered brass (US3NL) is the exception, it changes over time, so if you use it on cabinets, use it on the doors too or the mismatch will show within a year.

The Emtek Finger cabinet pull is brass throughout. Where steel is preferred, the Orca Hardware CK-12001 T-Pull Bar is steel with a 2 inch bar width in satin nickel. Satin nickel (US15) is also one of the Emtek Finger finishes, so the two can be run side by side in the same finish family with different base metals.

Pulls like the Emtek Finger use two holes on a fixed center-to-center spacing and give you a full-hand grip, which is what you want on drawers and heavy doors. Knobs take a single hole and suit small upper doors. If knobs are the call, the Orca Hardware Bachelor Collection round knob and round ring knob are both 1-1/4 inch diameter, and the Blackcomb square knob is 25mm. Many kitchens mix the two: pulls on drawers, knobs on uppers.

No. The SDC SP50 is a 50mm spindle and its function is door controls, not a pull of any kind. It shares no mounting or grip role with the Emtek Finger cabinet pull, which is a brass cabinet pull supplied with mounting screws.