Emtek Keaton Cabinet Finger Pull, Schaub Collection

The Keaton finger pull is offered in one size, 1-1/2 inches, across every finish. If you need a longer run of pull on a wide drawer front, look at a center-to-center bar pull instead, such as the Deltana SBP35 modern square bar pull at 3-1/2 inches or the Omnia 1968/102 at 4 inch center-to-center.

They serve a similar purpose but are not the same part. The Emtek Keaton is a finger pull in the Schaub collection, solid brass, 1-1/2 inches with a 1-3/8 inch projection, and it sits as a compact single pull on the face of a door or drawer. The Schaub Sabre edge pulls are a separate family sized by center-to-center spacing: the 10010 at 3 inches, the 10011 at 4 inches, and the 10012 at 5 inches, all solid brass. If your drawing calls out a center-to-center dimension, you are looking at the Sabre edge pull line rather than the Keaton.

The Emtek Keaton is a finger pull in solid brass, sized 1-1/2 inches with a 1-3/8 inch projection, so the hand curls into it rather than wrapping a bar. If the cabinet or drawer needs something you can grab with a full hand, the Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch solid brass square bar pull, and the Omnia 1968/102 is a forged solid brass modern pull on 4 inch center-to-center spacing. Both mount through two bored holes on centers; the Keaton finger pull is a single small pull with a much shorter footprint on the drawer face.

Brass. Both the material and the substrate are brass, so the finish sits on brass rather than a cast zinc core. That is the reason it holds up better than a diecast pull on a drawer that gets pulled twenty times a day.

A finger pull is a short tab you hook a finger or two behind, rather than a bar you wrap your hand around. The Keaton is a finger pull, so it suits small drawers, cabinet doors, and tight or frameless runs where a long bar would look heavy. On a wide drawer or a refrigerator panel, use a bar or appliance pull instead, like the Schaub 79-8 Steamworks 8 inch appliance pull.

It is classified residential. For multi-family unit turns, model homes, and custom residential cabinetry it is on spec. For high-traffic commercial casework, a locksmith or MRO buyer is usually better served by a heavier utility pull such as the Trimco 553 Series drawer pull at 3 inch center-to-center or the Trimco 562 Series, offered at 3-1/2 inch, 4 inch, and 96mm.

Projection is how far the pull stands off the cabinet face, which matters where a door swings past a wall or an adjacent appliance. The Emtek Keaton finger pull projects 1-3/8 inches. The Omnia 1969 and Omnia 1971 are forged solid brass modern pulls at 1-3/16 inch projection, and the Omnia 1970 is forged solid brass at 1-1/4 inch projection. All are brass; the Omnia trio sits slightly closer to the door face than the Keaton.

The Keaton finger pull is a contemporary, modern rectangular brass pull offered in Oil Rubbed Bronze US10B, Polished Nickel US14, Satin Nickel US15, Flat Black US19, Polished Chrome US26 and Satin Brass US4. For larger drawer fronts, the Trimco 553 Series drawer pulls run 3 inch center-to-center and the Trimco 562 Series offers 3-1/2 inch, 4 inch and 96mm center-to-center. For a refrigerator or range panel, the Schaub 79-8 Steamworks is an 8 inch appliance pull. Confirm the finish on the larger pulls against the Keaton finish you select so the run reads as one family.

The Emtek Keaton finger pull is classified as residential, so for cabinetry in a commercial or institutional space it is worth looking at pulls specified for that traffic. The Trimco 553 Series and 562 Series drawer pulls are common on commercial millwork, and the Orca Hardware CK-12001 T-pull bar is a steel bar with a 2 inch bar width in satin nickel. The Keaton remains a brass finger pull intended for residential cabinetry.

Yes. The Keaton is a modern rectangular shape with a contemporary look, part of Emtek's Schaub collection. It reads clean against slab and flat-panel doors. If you are after a round profile instead, the Orca Hardware Bachelor Collection round cabinet knob is 1-1/4 inch diameter, and the Blackcomb square knob is 25mm.