You may also like
Emtek Warwick Appliance Pull, 12" and 18" Appliance Pulls, Schaub Collection
Model: EMTEK-WARWICK-APPLIANCE-PULLS
Emtek Warwick Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.
Specifications:
Center to Center: 12" or 18"
Projection: 1-3/4"
Material: Brass
Mounting: Standard,...
Emtek
Starting at
$251.00
$200.80
Emtek Alexander Appliance Pull, 12" and 18" Appliance Pulls, Schaub Collection
Model: EMTEK-ALEXANDER-APPLIANCE-PULLS
Emtek Alexander Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.
Specifications:
Center to Center: 12" or 18"
Projection: 2"
Material: Brass
Mounting: Standard,...
Emtek
Starting at
$251.00
$200.80
Emtek Westwood Appliance Pull, 12" and 18" Appliance Pulls, Schaub Collection
Model: EMTEK-WESTWOOD-APPLIANCE-PULLS
Emtek Westwood Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.
Specifications:
Center to Center: 12" or 18"
Projection: 1-3/4"
Material: Brass
Mounting: Standard,...
Emtek
Starting at
$251.00
$200.80
Emtek Tribeca Appliance Pull, 12" and 18" Appliance Pulls, Schaub Collection
Model: EMTEK-TRIBECA-APPLIANCE-PULLS
Emtek Tribeca Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.
Specifications:
Center to Center: 12" or 18"
Projection: 1-7/8"
Material: Brass
Mounting: Standard,...
Emtek
Starting at
$251.00
$200.80
Emtek Spindle Appliance Pull, 12" and 18" Appliance Pulls, Schaub Collection
Model: EMTEK-SPINDLE-APPLIANCE-PULLS
Emtek Spindle Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.
Specifications:
Center to Center: 12" or 18"
Projection: 1-7/8"
Material: Brass
Mounting: Standard,...
Emtek
Starting at
$251.00
$200.80
Emtek Jasper Appliance Pull, 12" and 18" Appliance Pulls
Sold as complete set. Includes screws.
Product Codes:
12" C-to-C: 86693
18" C-to-C: 86694
How to Order:
Product Code + Finish
For Example: 86693US14
To order optional mounting:
Concealed Surface (CS) + Product Code + Finish
For Example: CS86694US14
Back to Back (BTB) + Product Code + Finish
For Example: BTB86694US14
Specifications:
- Center to Center: 12" or 18"
- Length: 13-3/8" (12") or 19-3/8" (18")
- Width: 3/4"
- Projection: 1-7/8"
- Material: Brass
- Mounting: Standard, Concealed Surface, or Back to Back
Manufacturer Resources
Emtek Door Pulls Dimensions
Product Specs
- Subcategory:
- Pulls and Push Plates
- Collection:
- Brass
- Product Type:
- Appliance Pulls
- Product Group:
- Cabinet Hardware
- Product Subgroup:
- Appliance Pulls
- Commercial/Residential:
- Residential
- Series:
- Jasper
- Theme:
- Contemporary
- Electronic:
- No
- Keyed:
- No
- Keyed Function:
- Non-Keyed
- Lock Function:
- Appliance Pull
- Handle Type:
- Door or Appliance Pull
- MAP Policy:
- Yes
- Product Function:
- Appliance Pull
- Product Style:
- Industrial Modern
- Product Material:
- Brass
- Product Category:
- Cabinet Hardware
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 86693-US4 – Frequently Asked Questions
1) Will the Emtek Jasper appliance pull fit my 24-inch panel-ready refrigerator door?
The Jasper pull comes in two center-to-center spacings, 12 inches and 18 inches, with overall lengths of 13-3/8 inches and 19-3/8 inches. What matters for a panel-ready fridge is the mounting hole spacing your panel is bored for (or that you can bore), not the appliance width. Measure hole center to hole center: 12 inches takes product code 86693, 18 inches takes 86694. Allow for the 19-3/8 inch overall on the 18 inch version so the ends clear the panel edges, and 1-7/8 inches of projection off the face for grip clearance.
2) What is the difference between standard, concealed surface, and back-to-back mounting on the Emtek Jasper pull?
Three mounting methods, and they decide how the pull attaches to the panel. Standard is thru-bolt with decorative caps: the fasteners pass through the panel and finish with visible caps on the back. Concealed Surface (CS) mounts to the face with no fastener showing through, which is what you want when the back of the panel is visible or the panel cannot be drilled through. Back to Back (BTB) pairs two pulls through the same panel so you get a matching pull on each side, used on pass-through and swing doors. The mounting prefix goes in front of the product code when ordering: CS86694US14 or BTB86694US14.
3) How do I write the part number for an Emtek Jasper appliance pull in polished nickel?
Build the number as product code plus finish. An 18 inch Jasper in Polished Nickel (US14) is 86694US14; the 12 inch is 86693US14. If you want optional mounting, the prefix comes first: CS86693US14 for concealed surface, BTB86693US14 for back to back. That is the whole ordering syntax, so a distributor or contractor writing a submittal can specify any of the 36 combinations from three pieces of information: size, mounting, finish.
4) What finishes does the Emtek Jasper appliance pull come in, and do they match across both sizes?
Six finishes: Satin Brass (US4), Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), and Polished Chrome (US26). All six are offered in both the 12 inch and the 18 inch, and in all three mounting styles, so you can run a 12 inch on the dishwasher and an 18 inch on the refrigerator in the same finish without a mismatch. That matters on a kitchen where the appliance pulls have to read as a set with the cabinet hardware.
5) Is the Emtek Jasper appliance pull solid brass or plated zinc?
Brass. Both the material and the substrate on the Jasper are brass, so the finish sits on a brass body rather than a zinc casting. On a refrigerator or freezer pull that gets grabbed with a full hand many times a day, that is the difference that decides whether the pull loosens or the finish wears through at the grip point.
6) Do I need to buy mounting screws separately for the Emtek Jasper pull?
No extra hardware to order. The Jasper ships as a complete set with screws included. On the standard version those are thru-bolts with decorative caps that finish the back side of the panel. What you do need to supply is the door thickness when ordering, since the fastener length has to suit the panel you are mounting into.
7) Why does ordering an appliance pull ask for door thickness?
Because the Jasper is a through-mounted pull on the standard and back-to-back versions, and the fastener has to span the panel. Give the thickness of the appliance panel or door the pull is going onto so the screws land correctly. This is the one field people skip and then find the bolts are short. Concealed Surface mounting is the option to look at when you cannot or do not want to drill through the panel.
8) How much clearance do I need behind and around an Emtek Jasper pull?
Plan on 1-7/8 inches of projection off the face of the panel, with a 3/4 inch bar width. Check the projection against anything the appliance door swings toward, an adjacent wall return, an island, or a perpendicular cabinet run, because a 1-7/8 inch stand-off on a door that opens into a tight galley is where these get bumped. The 3/4 inch width is what your hand closes around, and it is the number to match if you are trying to keep the appliance pulls visually consistent with existing bar pulls on the cabinets.
9) Can I use the Emtek Jasper appliance pull as a cabinet or pantry door pull instead?
Yes. The Jasper is catalogued as a door or appliance pull, so the same pull works on a pantry door, a tall cabinet, or a barn-style slider as well as on a panel-ready appliance. The 18 inch (19-3/8 inch overall) reads correctly on a full-height pantry door; the 12 inch suits a dishwasher or drawer panel. For a door someone passes through from both sides, order Back to Back so there is a matching pull on the reverse.
10) Is the Jasper pull handed, or does it install the same either way?
No handing. It is a straight non-keyed pull, symmetrical across its 12 or 18 inch center-to-center span, so there is no left or right version and nothing to specify beyond size, mounting, and finish. Nothing electronic and nothing keyed in it either, so there is no wiring or keying to coordinate with the rest of the kitchen hardware.
11) Is the Emtek Jasper pull suitable for a commercial or multi-family install?
The Jasper is a residential-duty pull. It is the right piece for a single-family kitchen, a condo unit, or a high-end apartment renovation where a panel-ready refrigerator needs hardware that matches the cabinets. For a heavy-traffic commercial kitchen or an institutional facility, look at commercial-rated pull hardware instead, since nothing here is rated for that service level.
12) What does the Jasper pull look like, and what style of kitchen does it suit?
Industrial modern in styling, contemporary in overall theme, built from brass in a plain 3/4 inch bar section with a 1-7/8 inch stand-off. It is a squared, unornamented pull rather than a traditional or ornate one, so it sits well against flat-panel and slab cabinet fronts and less well in a raised-panel traditional kitchen. In Flat Black (US19) it reads industrial; in Satin Brass (US4) or Polished Nickel (US14) it reads contemporary warm.
How fast can I get the Emtek 86693-US4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 86693-US4 come with a warranty?
Absolutely. The Emtek 86693-US4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 86693-US4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 86693-US4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.