Emtek Modern Brass Paper Holder - Bar Style

Seven finishes: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Those are standard US finish codes, so you can line the bath accessories up with Emtek knobs and levers specified in the same code. Unlacquered Brass has no protective coating and will patina with use, so keep the whole room in one finish choice if you want a uniform look.

The rosette is the wall-mount backplate the post sits on, and there are six shapes: Disk (09), Small Disk (00), Square (10), Neos (11), Modern Rectangular (12), and Urban Modern (16). Pick the one that matches the rosettes on your Emtek door hardware, round with round and square with square. Small Disk is the tightest footprint if you are mounting close to a corner or trim.

No. The Deltana BBN2001 and the Deltana 55D2001 are single post holders, which mount on one wall point and cantilever the roll out. The Emtek Modern Brass Paper Holder - Bar Style spans a bar between two mounting points, so the wall prep and the footprint are different. The Deltana 98C2001 is a classic double post holder if you want two mounting points in a traditional look rather than the contemporary Emtek styling.

Bar style, meaning the roll rides on a straight bar carried between the wall mounts rather than on a spring-loaded pivot post. It is wall mounted, so it needs solid backing or anchors in the wall, not a vanity or a floor stand.

Material and substrate are both brass, and it belongs to Emtek's Modern Brass bath hardware line. Emtek classifies it as residential, so for a high traffic public restroom you want a commercial grade accessory instead. It is a good fit for single family, condo, and multi-family unit bathrooms where the finish is meant to match the door hardware.

A euro holder is an open hook or arm that the roll drops onto from the front, so the roll changes without removing a bar. Options there include the Sure-Loc Baden and Boulder wall mounted euro holders and the Orca Hardware 3655 Swirl and 5255 Ripple euro holders. The Emtek bar style keeps the roll captive on a bar between two rosettes, which is the cleaner look but means sliding the bar to reload.

Yes. Because the Emtek Modern Brass bar holder is ordered as a finish plus rosette combination with a fixed 2-7/8 inch projection, you can lock one spec (for example Satin Nickel with the Square rosette) and repeat it across every unit, then match the same finish code on the door hardware. Keep in mind it is a residential-duty accessory, so in-unit baths yes, shared public restrooms no.

Two choices: the finish (one of seven, from Flat Black to Unlacquered Brass) and the rosette shape (one of six, Disk, Small Disk, Square, Neos, Modern Rectangular, or Urban Modern). Projection is fixed at 2-7/8 inches, so there is no size to pick.

The Deltana 88DTPH toilet paper holder from the 88 Series is a solid brass holder, as is the Deltana 55D2001 single post holder in the 55D Series. The Emtek Modern Brass Paper Holder - Bar Style is also brass, and it differs in that it is offered across six rosette styles - Disk (09), Small Disk (00), Square (10), Neos (11), Modern Rectangular (12) and Urban Modern (16) - so the wall escutcheon can be matched to other hardware in the room. The Deltana holders are each a single fixed design.

The Orca Hardware 2752 Cypress and the Orca Hardware 4852 Blakely are both toilet paper holders supplied with a plastic tube, which is the part most often replaced in high-turnover units. The Emtek Modern Brass Paper Holder - Bar Style is a brass wall mount holder intended for residential use and is specified when the finish and rosette need to match other hardware.

The Emtek bar-style holder is brass throughout, with brass listed as both the material and the substrate. If you specifically want a spring-loaded plastic tube type, the Orca Hardware 2752 and the Orca 4852 Blakely are holders supplied with a plastic tube.