Emtek Sandcast Bronze Paper Holder - Bar Style

The rosette is the wall-mounted backplate the post lands on, and it is the one choice that decides whether the holder matches the rest of the room. Emtek offers this bar-style holder with five: #1 Rosette, #2 Rosette, #3, #4 and #6. If Emtek Sandcast Bronze knobs or levers are already on the doors, order the paper holder with the same rosette number so the bath hardware and door hardware read as one set. All five rosettes come with a 3 inch projection.

It is part of Emtek's Sandcast Bronze bath hardware series, sharing the collection and the rosette numbering with Emtek's sandcast bronze door hardware. Ordering the same rosette number and the same finish code (FB, MB or TWB) as the knobs or levers is what makes the bath and the doors read as a set. It does not carry across to Emtek's other collections, so a sandcast bronze holder will not match a Stretto or Brass Modern rosette.

The Emtek Sandcast Bronze Paper Holder - Bar Style is a bronze part, with bronze given as both its material and its substrate. If you want the same wall mounted bar style function in solid brass, the Deltana 88DTPH from the 88 Series and the Deltana 55D2001 from the 55D Series are both solid brass toilet paper holders. The 55D2001 is a single post design, so the roll loads from one end rather than sitting between two posts.

Wall mount. It is a two-post bar holder, so both rosettes fasten to the wall and the bar spans between them. Plan blocking or use suitable anchors on drywall before tile goes up, because a cast bronze holder plus a roll is not something a bare drywall anchor should carry long term.

A bar holder carries the roll on a bar between two wall posts, so it needs clear wall width for both mounting points but supports the roll at both ends. A single post cantilevers the roll off one mounting point, which fits a narrow return or a pilaster where you only have one spot to anchor. If the wall is tight, the Deltana 55D2001 single post or the Deltana BBN2001 single post are the single-mount alternatives ZenSupply carries.

For a job where the Emtek is more finish than the space needs, Orca Hardware makes euro-style holders with no bar to remove, the 3655 Swirl and the 5255 Ripple. Where you want a replaceable roller, the Orca 2752 Cypress and the Orca 4852 Blakely both use a plastic tube. Deltana's solid brass options are the 88DTPH and the 98C2001 double post, which is the closest two-post arrangement to the Emtek bar style.

No. The Deltana BBN2001 is a single post toilet paper holder from the BBN Series, so the roll is held on one post. The Emtek Sandcast Bronze Paper Holder - Bar Style spans a bar between rosettes and is offered with #1, #2, #3, #4 and #6 rosettes at a 3 inch projection, so the wall footprint and the way the roll loads are different parts even though both are wall mounted holders.

The Orca Hardware 2752 from the 27-Cypress Series and the Orca Hardware 4852 Blakely from the 48-Blakely Series both come with a plastic tube, which is the wear part that gets replaced over the life of the fixture. The Emtek Sandcast Bronze Paper Holder - Bar Style is a bar style holder rather than a tube and roller arrangement.

The Emtek Sandcast Bronze Paper Holder - Bar Style is designated residential. For a commercial restroom the Deltana solid brass holders are worth pricing against it, including the 88DTPH in the 88 Series and the 98C2001 Classic double post in the 98C Series, where the double post captures the roll at both ends.

The Emtek Sandcast Bronze Paper Holder - Bar Style belongs to the Sandcast Bronze Bath Hardware series, so it matches other pieces in that series. On the Deltana side the holders are series based as well, with the 55D2001 in the 55D Series, the 88DTPH in the 88 Series, the 98C2001 in the 98C Series and the BBN2001 in the BBN Series. Orca Hardware runs the same way, with the 2752 in the 27-Cypress Series, the 3655 in the 36-Swirl Series, the 4852 in the 48-Blakely Series and the 5255 in the 52-Ripple Series.

Purely mechanical, no power and no batteries. It is a cast wall-mounted holder, so the only rough-in it needs is solid backing at the two rosette locations.