Emtek Modern Classic Brass Leverset - Stuttgart Lever, Passage Set

Standard door prep works. The Stuttgart passage set is a tubular lockset built for a 2-1/8 inch cross bore, which is the bore already in nearly every prepped residential door. Pick the backset to match what's drilled: the set is offered in 2-3/8 inch and 2-3/4 inch, the two standard backsets. Latch and strike plate come in the box, so an existing bore and edge mortise usually takes it straight across.

No lock at all. Passage function means the levers always retract the latch from both sides, with no key and no thumbturn, so it latches the door shut but never secures it. That's what you want on a hall, closet, pantry, or laundry door. For a bedroom or bathroom you need the privacy version with a thumbturn, and for an exterior or lockable door you need a keyed entry set instead.

Yes, and getting it wrong means the lever points the wrong way. The Stuttgart is ordered left hand or right hand. Stand outside the door, on the side it swings away from: if the hinges are on your left it's left hand, hinges on the right is right hand. Order one handing per opening, and note that a pair of doors in a matched room often needs one of each.

Grade 2 passage levers in the same cylindrical family include the Accentra 5301LN Augusta in the 5300 Series, the Accentra 4601LN with Augusta trim in the 4600 Series, the Falcon B101 medium duty non-handed passage lever in the B Series, the Hager 2510 with the Withnell lever for 1-3/8 inch to 2 inch doors, the Arrow GL01 with the Sierra lever for 1-3/4 inch to 2 inch doors, and the Design Hardware J75 flat lever for 1-3/4 inch doors. All carry the same passage/hall/closet function as the Emtek Stuttgart. The Stuttgart differs in being a brass residential lockset offered across eight finishes and six rosette styles, so the decorative range is where the two paths part.

Within the same decorative residential category, the Baldwin Estate 5103 passage lever with the 5048 rose holds the same passage/hall/closet function. The Bravura Miramar with round trim is a Grade 2 passage leverset in a US4 satin brass finish, and Bravura also offers the Atlanta and Orlando with round trim and the Tampa with square trim, all Grade 2 passage. The Emtek Stuttgart itself is a contemporary brass design and its rosette is chosen separately across Disk, Modern, Modern Rectangular, Neos, Square and Urban Modern, which is a different way of controlling the trim shape than picking a fixed round or square rose.

The Emtek Stuttgart passage leverset is a residential brass tubular lockset in a passage function, so it is specified by finish and rosette rather than by ANSI grade. For a commercial opening where a grade has to appear on the submittal, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock with non-handed levers, fire rated, covering doors 1-3/8 inch to 2-1/4 inch thick. The Design Hardware X75 is also a Grade 1 passage lever lockset, built for 1-3/4 inch doors. Both hold the same passage function as the Stuttgart, meaning the latch retracts from either side and there is no lock.

The Emtek Stuttgart passage set is non-keyed with a passage function, so the latch retracts from both sides and nothing locks. For bed and bath, a privacy function is the correct part: the Baldwin Estate 5103 privacy lever with the 5048 rose, the Kwikset 300BRNL Breton privacy lever set at Grade 3 for 1-3/8 inch to 1-3/4 inch doors, the Hager 2540 with the Withnell lever, or the Arrow MK02-TA privacy lock, which is a knob rather than a lever. Ordering the passage set for a bathroom is the most common substitution error on this style of hardware.

No. The Emtek Stuttgart passage set includes a latch and strike plate and is meant for a door that latches into a frame. For a door leaf that only needs a pull, a dummy trim is the part: the Baldwin Estate 5103 half dummy lever comes as a left hand and a right hand version, the BEST 9K Series 1DT single dummy trim is a Grade 1 non-keyed heavy duty lever, the BEST 7KC Series 1DT single dummy trim is Grade 2 medium duty, the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy, and the Callan Bentley is a Grade 2 dummy lever.

The Emtek Stuttgart passage set is non-keyed, so it takes no cylinder and will not secure an entry. Keyed entry cylindrical levers in the comparable range include the Cal-Royal AG00 entrance lever at Grade 2 with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset for 1-3/8 inch to 1-3/4 inch doors, the Dexter C1000 Grade 1 entry/office clutching lever for 1-3/8 inch to 1-3/4 inch doors, the Hager 2525 Grade 2 commercial entry lock, and the Falcon B511CP6D Grade 2 entry/office lever. For a residential entry with a matching decorative look, the Deltana Claremont, Manchester, Morant and Linstead levers are entry function, the last three for 1-3/8 inch to 2 inch doors.

The Emtek Stuttgart is specified for doors 1-3/8 inch to 1-3/4 inch thick with a 2-1/8 inch cross bore. For a 2 inch door, the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch, the Hager 2510 Grade 2 passage lever covers 1-3/8 inch to 2 inch, the Arrow GL01 Grade 2 passage lever covers 1-3/4 inch to 2 inch, and the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever covers 1-3/4 inch to 2 inch and is fire rated. All four are passage function.

The Emtek Stuttgart is a residential brass leverset. Where the traffic is heavier, the heavy duty passage options are the Falcon K101 Grade 1 passage lock, fire rated and non-handed for 1-3/8 inch to 2-1/4 inch doors, the Falcon T101 Grade 1 heavy duty passage lever with pressure release technology in the T Series, and the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever for 1-3/4 inch to 2 inch doors. Each keeps the same passage function, so the opening behaves the same for occupants.

Four choices plus one option. Handing (left or right), backset (2-3/8 or 2-3/4 inch), finish, and rosette shape: Disk, Modern, Modern Rectangular, Neos, Square, or Urban Modern. Then decide on the concealed fastener mechanism, which hides the screws on the rosette, or take the 28 degree rotation latch, or neither. There is also a split finish option if you want the two sides of the door different, and a door thickness field to state what you're mounting to.

CF means the rosettes mount with no exposed screws, so you see clean metal on the face of the door instead of two screw heads. It changes the mechanism, not the lever, and it's a look decision. Choosing CF brings the 28 degree rotation latch with it. If you don't care about visible screws, the standard build is the No Thanks option.

Eight finishes: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). These are standard US finish codes, so they match across an Emtek brass program door to door. Unlacquered brass will patina over time by design; if you want it to stay bright, Satin Brass is the lacquered choice.

Yes. Stuttgart is a lever series, and the passage set is the hall and closet function of it, so the privacy and dummy versions carry the same lever, the same rosette choices, and the same eight finishes. Buy the whole opening list in one finish code and one rosette shape and the house reads consistently. If you're mixing brands instead, the Baldwin Estate 5103 comes in passage, privacy, and left and right hand half dummy, so it also covers a full door schedule.

The box is complete for a prepped door: the set ships with the latch and the strike plate along with the levers and rosettes. The only thing to confirm before ordering is the latch faceplate corner, round or square, so it drops into the mortise already cut in your door edge without recutting.

The Emtek Stuttgart passage set is ordered as left hand or right hand, so the handing of the opening has to be confirmed before the order goes in. Several commercial passage levers are non-handed instead and can go on either swing out of the same box: the Falcon B101 Grade 2 medium duty passage lever and the Falcon K101 Grade 1 heavy duty passage lever are both non-handed. On the decorative side, the Baldwin Estate 5103 half dummy is sold as separate left hand and right hand parts, so handing matters there as well.

They share the function but not the build. The Kwikset 200BRNL Breton passage lever set is Grade 3 for 1-3/8 inch to 1-3/4 inch doors, and the Kwikset 200DL Delta passage lever is a reversible interior hall and closet lock with an adjustable 6AL latch and RCS strike; a 200DL-RCALFD version ships with a round corner adjustable 20 minute UL latch and round corner strike. The Emtek Stuttgart is a solid brass residential set, ordered with the rosette chosen separately and offered in Flat Black, French Antique, Oil Rubbed Bronze, Polished Chrome, Polished Nickel, Satin Brass, Satin Nickel and Unlacquered Brass.

The Emtek Stuttgart can be ordered with the CF Mechanism, which leaves the rosettes with no exposed screws, and that selection brings a 28 degree rotation latch with it. Among the passage peers, the Bravura Miramar, Atlanta and Orlando come with round trim and the Tampa with square trim, all Grade 2 passage leversets, and the Baldwin Estate 5103 passage lever uses the 5048 rose. Those are fixed rose designs rather than a concealed fastener option, so the trim style is decided by the model chosen.

No. The Emtek Stuttgart is a non-electronic, non-keyed passage set, so it always opens from both sides. For keyless code entry on a lever, the Lockey 2835 mechanical pushbutton keyless lever lock has a passage function and is ADA compliant, fitting doors 1 3/16 inch to 2 inch, and the 2835DC is the double combination version over the same door range. The Lockey 1150 is a heavy duty mechanical keypad lever set with double combination in a passage function for 1-1/8 inch to 2 inch doors, and the 1150S adds an adjustable backset. The Delaney LP250 is a Grade 2 electronic keypad leverlock.

The Emtek Stuttgart covers non-keyed passage openings only. Keyed functions in the same cylindrical lever family carry the rest of a facility: the Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for 1-3/8 inch to 1-3/4 inch doors, the Hager 2580 with the Withnell lever is a Grade 2 storeroom lock for 1-3/8 inch to 2 inch doors, the Cal-Royal AG03 is a classroom lever with a 6-pin Schlage C keyway keyed different on a 2-3/4 inch backset, and the Dexter C1000 offers Grade 1 classroom and classroom security clutching levers for 1-3/8 inch to 1-3/4 inch doors. The Stuttgart itself can be ordered on either a 2-3/8 inch or 2-3/4 inch backset, so backset can be held consistent across the doors.

They are lever locks but not the same function. The Cal-Royal AUS00 is a Grade 3 entrance/office lever with a solid brass forged body for 1-3/8 inch to 1-3/4 inch doors, and the Callan Artino is a Grade 3 entrance leverset, both of which lock. The Emtek Stuttgart is passage function, non-keyed, so it never locks. The Callan Asheville is the Grade 3 passage leverset in that range and is the closer match on function.

Brass. The Stuttgart lever and rosettes are brass substrate, part of Emtek's brass collection, not a zinc casting with a brass-look plating. That matters for how the finish wears at a heavily used door and for the unlacquered option, which needs the base metal to patina properly.

No, it's purely mechanical, a non-electronic tubular passage set with no keypad, no code, and no wiring. If you want keyless access on an interior or utility door, look at a mechanical pushbutton set like the Lockey 2835, which is a keyless lever lock with passage function for 1-3/16 to 2 inch doors, or the Lockey 1150 keypad lever set for 1-1/8 to 2 inch doors.