Emtek Modern Crystal Knobset - Windsor Knob, Dummy (Pair)

A dummy pair is trim only. The Emtek Windsor crystal knobset in dummy pair form has no latch and no moving mechanism, so the knobs are fixed pulls on both faces of the door. Use it on closet or pantry doors held shut by a ball catch or roller catch, or on the inactive leaf of a double door. If the door needs to latch, order a passage function set instead, such as the Bravura Albany passage knobset. If you only need trim on one side, a single dummy like the Schlage A170 or Omnia 434/0 covers that.

No door prep is required. The Windsor dummy pair is surface mount, so the rosettes fasten to the face of the door with no 2-1/8 inch cross bore and no latch bore. That makes it a clean choice for a slab that has never been drilled, or for covering a face that already has trim in place.

It is a residential product. The Windsor crystal knobset is built for homes and residential interiors, with a brass base and a glass knob. For corridors, offices, or anything in a commercial traffic pattern, move to a graded cylindrical lock such as the Corbin Russwin CK4310 (Grade 1 passage) or the BEST 6K Series dummy trim (Grade 2).

The Emtek Windsor crystal knob dummy pair is specified for residential use and is a surface-mounted brass trim set with no door prep. For a graded commercial dummy, the Schlage A170 is a Grade 2 single dummy trim, heavy duty, for doors 1-3/8 to 1-7/8 inch, and the BEST 6K-1DT is a Grade 2 medium duty single dummy trim in the 6K Series. Both are single dummy trims rather than a matched pair.

A dummy knob such as the Emtek Windsor has no latch and is surface mounted with no door prep, so it will not hold a door closed. For a latching hall or closet door, the Dexter C2000 passage ball knob is a Grade 2 non-keyed passage lock for 1-3/8 to 1-3/4 inch doors, the Pamex FTF30 Baron is a Grade 3 passage knob lockset for the same thickness range, and the Baldwin Estate 5011 Colonial is a passage knob with the 5058 rose if you want a decorative residential look.

It ships as a complete set: two knobs with their rosettes, one for each face of the door. The rosette is your choice at order time, and any Emtek brass rosette can be paired with the Windsor knob.

Six rosette shapes are offered: Disk, Modern, Modern Rectangular, Neos, Square, and Urban Modern. The round shapes (Disk, Modern, Neos) suit traditional and transitional openings; Square, Modern Rectangular, and Urban Modern read more contemporary and match squared-off backplates elsewhere in a house.

Seven finishes: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). The US codes let you line these up against hardware already on the building. Unlacquered brass will patina over time, which is the point of it, while Polished Nickel is a lifetime finish.

No. It is non-keyed with no locking function at all, so it will not secure a door. For a bedroom or bath you want a privacy set like the Pamex FTF Baron privacy knob or the Deltana 6112 St. Thomas privacy knob; for a keyed opening, an entrance function set such as the Cal-Royal BER00.

That is exactly the use. Put the dummy pair on the inactive leaf so both faces get a matching knob, and hang a functioning passage or privacy set on the active leaf. Since the dummy is surface mounted with no bore, the fixed leaf stays solid. Match the rosette and finish between the two leaves so the pair reads as a set.

No - the Emtek Windsor is a non-keyed dummy set with no lock function at all, so it cannot secure a bath or bedroom door. For privacy on those openings, the Baldwin Estate 5077 Bethpage is a privacy knob with the R027 rose, the Deltana 6112 St. Thomas is a privacy knob for 1-3/8 to 2 inch doors, and the Pamex FTF10 Baron is a Grade 3 privacy knob lockset for 1-3/8 to 1-3/4 inch doors.

They look similar on the door but they are not interchangeable. The Emtek Windsor dummy pair surface mounts with no door prep and does not turn a latch. A passage set such as the Arrow MK01 Grade 2 non-keyed cylindrical knob or the Corbin Russwin CK4410 Grade 2 passage/closet knob requires a bored cylindrical prep and a latch in the door edge, both for 1-3/8 to 1-3/4 inch doors. If the door already has a bore, a dummy is the wrong part unless you are filling an inactive leaf.

For a plain dummy knob, the Cal-Royal BA40 Barrington is a dummy cylindrical knob covering 1-3/8 to 1-3/4 inch doors, and the Bravura Biloxi with round trim is a Grade 2 dummy knobset. Both are single-knob dummy styling rather than the brass, glass-collection Windsor knob, which is supplied as a complete pair and can be ordered with any brass rosette.

The Emtek Windsor knob set covers doors 1-3/8 to 1-3/4 inch thick. For thicker doors, the Corbin Russwin CK4310 Grade 1 passage knob and the Deltana 6171 Round Knob entry both cover 1-3/8 to 2 inch, and the Falcon X101 Grade 1 heavy duty passage knobset goes to 2-1/4 inch. Those are latching functions, so plan on a bored prep and a latch.

Yes, a split finish can be requested at order time using the optional split finish note, which is useful when a door faces two rooms with different hardware schemes, say oil rubbed bronze on a hallway and polished chrome in a bath.

The Emtek Windsor knob is non-keyed, so it cannot serve an entry. Keyed knob options include the Kwikset 400P Polo keyed entry knob with 6AL latch and RCS strike, the Cal-Royal BER00 Grade 3 entrance/office knob with a Kwikset keyway, and the Corbin Russwin CK4851 entrance/office cylindrical knob with a conventional cylinder for 1-3/8 to 2 inch doors. Finish matching across brands is worth confirming before you commit.

The Emtek Windsor is sold as a complete pair per opening in a chosen finish and rosette. If you are standardizing a run of interior doors on a plain knob instead, the Sure-Loc Bergen round knob is offered as a 6-pack with an adjustable backset, and the Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes for 1-3/8 to 1-3/4 inch doors.