Emtek Modern Designer Brass Leverset - Spencer Lever, Dummy (Pair)

No boring needed. The Spencer dummy leverset is surface mount, so it screws to the face of the door with no 2-1/8 inch cross bore or latch bore. That makes it the usual choice for closet doors, french door inactive leaves, and any opening where you want matching lever trim but no latch.

Because the Spencer lever is shaped, not symmetrical, so it has to point the correct way when mounted. Left Hand and Right Hand are both offered. Stand outside the door: if the hinges are on your left it is left hand, hinges on the right is right hand. Get this wrong and the lever will sweep the wrong direction.

Yes, that is how the Spencer is ordered. Six brass rosette styles are available: Disk, Modern Rectangular, Modern, Neos, Square, and Urban Modern. Pick the same rosette and finish used on the passage and privacy sets elsewhere in the house and the dummy pair will read as part of the same suite.

The Emtek Spencer dummy lever pair is designated for residential use. For a commercial opening, the BEST 9K Series 1DT single dummy trim lever is Grade 1 heavy duty and non-keyed, and the BEST 7KC Series 1DT single dummy trim is Grade 2 medium duty. The Accentra 455LN Augusta is another Grade 1 heavy duty single dummy cylindrical lever, in the 5400 Series.

The Baldwin Estate 5103 half dummy lever with the 5048 rose is the nearest decorative counterpart. Where the Emtek Spencer dummy is sold as a pair of levers in brass with a choice of rosette, the Baldwin 5103 half dummy is ordered as a single handed piece - BAL-5103-LDM for left hand and BAL-5103-RDM for right hand - so two order lines are needed to trim both faces of a door.

Yes. The Emtek Spencer dummy lever pair is surface mounted with no door prep and has no latch, so it will not hold a door closed. For a latching but non-locking opening in the same decorative family, the Baldwin Estate 5103 passage lever with the 5048 rose is the match; for a bed or bath door, the Baldwin Estate 5103 privacy lever uses the same trim.

The Emtek Spencer dummy pair is a residential surface mounted trim set. Where a fire rating is required, the Falcon K101 is a Grade 1 heavy duty passage lever with a fire rating covering doors 1-3/8 inch to 2-1/4 inch, and the Corbin Russwin CL3110 is a Grade 1 fire rated vandal resistant passage lever for 1-3/4 inch to 2 inch doors.

Seven: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered brass and oil rubbed bronze are living finishes that will patina with handling, so if you need a dummy pair that stays looking identical to a lock installed years ago, a plated finish like US26 or US15 is the safer match.

A dummy pair puts lever trim on both faces of the door, which is what you want on a double door or a door people pull from either side. A half dummy is one side only, like the Baldwin Estate 5103 left hand and right hand half dummy versions, and is typical for a closet door you only open from the hall. Both are surface mounted with no latch.

No. A passage lever such as the Bravura Atlanta Grade 2 passage leverset or the Callan Asheville Grade 3 passage leverset contains a working latch and retracts it when turned. The Emtek Spencer dummy pair is fixed trim that mounts to the door surface with no door prep, used on inactive or closet doors where a latch is not wanted.

The Callan Bentley is a Grade 2 dummy lever, and the BEST 7KC Series 1DT is a Grade 2 medium duty single dummy trim lever. Both are single dummy pieces rather than a pair, and neither offers the brass construction, seven finishes, or six rosette choices of the Emtek Spencer dummy set.

The Emtek Spencer dummy lever pair covers doors 1-3/8 inch to 1-3/4 inch. For a 2 inch door, the Deltana Manchester, Morant, and Linstead entry levers each cover 1-3/8 inch to 2 inch, and the Hager 2510 Grade 2 passage lever covers 1-3/8 inch to 2 inch. Those are latching functions rather than dummy trim.

The Emtek Spencer dummy pair is non-keyed and has no cylinder. For a keyed opening, the Cal-Royal AG00 entrance lever uses a 6-pin Schlage C keyway with a 2-3/8 inch backset, and the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt. On the decorative side, the Deltana 5851 Claremont lever is an entry function.

Yes. A split finish field is available at order time, so you can run one finish on the interior face and another on the exterior. There is also a comments field if the pair needs anything called out, such as matching an existing rosette style.