Emtek Riviera Appliance Pull, Schaub Collection

The Riviera appliance pull is made in 12 inch and 18 inch center-to-center, so a panel drilled at 12 inch centers takes the 12 inch pull directly. Measure hole center to hole center on the existing pull or the appliance panel prep. If your centers land anywhere other than 12 or 18 inches, the Riviera won't line up without redrilling.

Three: standard, concealed surface, and back to back. Standard and concealed surface mount through or onto one face, so they suit a panel-ready appliance door or a cabinet front. Back to back pairs two pulls through the same door, which is what you want on a glass or a double-sided pass-through. The mounting style you pick decides what hole prep the door needs, so settle it before anyone drills.

Six finishes across both lengths: Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), and Satin Brass (US4). Every one of the six is offered in both 12 inch and 18 inch center-to-center, so a kitchen mixing a 12 inch pull on the dishwasher panel and an 18 inch on the refrigerator matches without hunting a substitute.

Yes, and it is common on tall pantry and broom cabinet doors where a normal cabinet pull looks undersized. At 12 or 18 inch centers with a 1-3/4 to 2 inch projection, the Riviera reads as a full-height grip. The thing to check is the door stile: the pull body runs longer than the center-to-center measurement, so on a narrow rail or a door with a tight edge profile it can crowd the frame.