Emtek Sandcast Bronze Key In Knobset - Winchester Knob with Rosette Options - Single Cylinder

The Winchester sandcast bronze knobset covers doors from 1-3/8 to 1-3/4 inches, with 1-3/4 inches shipped as standard. If your door is thicker than 1-3/4 inches, the door thickness has to be called out on the order so the correct spindle and screw pack goes in the box. There is a door thickness field on the order form for exactly that.

Both backsets are offered on the Winchester knob, but 2-3/8 inches is what ships unless you say otherwise. Pick 2-3/4 inches at order time if that is what your door is bored for. Measure from the door edge to the center of the 2-1/8 inch cross bore before you decide, because the wrong backset will not reach the latch prep.

Yes, if the door is already prepped for a standard cylindrical lock. The Winchester is a tubular lock taking a 2-1/8 inch cross bore, which is the normal bore on residential doors already carrying a knob or lever. Confirm the backset on the existing prep is 2-3/8 or 2-3/4 inches and no new boring is needed.

Keyed alike is an option on the Winchester knobset at no charge, and so is keying to a specific code if you already have a key system running in the building. Order every opening you want on one key in the same submission and specify keyed alike; otherwise each lock comes keyed different. Mixing Schlage C and Weiser WR5 cylinders across the group breaks that, so pick one keyway for the whole set.

The Winchester knobset ships with a Schlage C keyway as standard and can be built with a Weiser WR5 cylinder instead by adding a W to the front of the product code, with no upcharge, so it can be keyed into an existing Weiser system. If the openings are keyed on Kwikset, the Cal-Royal BER00 entrance/office Grade 3 knob lock is supplied with a Kwikset keyway for 1-3/8 inch to 1-3/4 inch doors.

The Emtek Winchester sandcast bronze knobset is a residential entry knobset. For a commercial entrance opening that needs a Grade 1 knob, the BEST 8K Series is an entrance function single cylinder Grade 1 heavy duty knob lock, and the Corbin Russwin CK4851 is an entrance/office cylindrical lock with a Global knob and conventional cylinder listed Grade 1 for doors 1-3/8 inch to 2 inch thick. Both keep the keyed outside knob and single cylinder arrangement while moving to a heavier duty cycle than the Winchester's residential build.

The Winchester sandcast bronze knobset is built to a 1-3/8 inch to 1-3/4 inch door thickness range. For a thicker slab, the Deltana 3381 Egg Knob entry and the Deltana 6171 Round Knob entry both carry a 1-3/8 inch to 2 inch range, and the Corbin Russwin CK4851 entrance/office cylindrical lock also covers 1-3/8 inch to 2 inch. All three keep a keyed entry knob function.

The Winchester is an entry function knobset with a single cylinder, not a classroom or storeroom function, so the outside knob is not held locked the way those openings require. For storeroom, the Sargent 6G04 is a Grade 2 storeroom/closet knob lock with single cylinder and the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet single cylinder knob lock with a 2-3/4 inch backset. For classroom, the Dexter C2000 classroom ball knob lock is Grade 2 and keyed.

The Winchester is a residential sandcast bronze entry knobset. Where a labeled opening calls for a fire rated cylindrical knob, the Falcon W101 Grade 2 knob lock is fire rated with a passage/closet latch function and 2-3/4 inch backset, and the Falcon X101 is a Grade 1 heavy duty fire rated cylindrical passage knobset with an interchangeable core, covering doors 1-3/8 inch to 2-1/4 inch thick.

Four rosettes are offered with the Winchester knob, numbered 1 through 4, and the rosette drives the model number rather than a suffix. Key-in versions run 5104 (#1), 5102 (#2), 5103 (#3) and 5114 (#4); the matching dummies are 5154, 5152, 5153 and 5164. Each carries the WC knob code and the finish code, for example 5102WCMB.

Three finishes: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). All three are available on every one of the four rosettes. A split finish can also be specified, so an exterior finish that matches the rest of the entry can be paired with a different interior finish to match the room hardware.

For solid-brass decorative entry knobs, the Deltana 6901 Portland entry knob covers 1-3/8 to 1-3/4 inch doors and the Deltana 6171 Round and 3381 Egg entry knobs go up to 2 inch doors. Baldwin's Estate line is the closer match on cast weight, though the Estate knobs held here (5011 Colonial, 5000 Baltimore, 5077 Bethpage) are passage and privacy rather than keyed entry. None of these are sandcast bronze the way the Winchester is, so the surface texture and finish family will not match Emtek's bronze.

No. The Winchester key-in knobset is an entry function, single cylinder, keyed from the outside. A bed or bath door needs a privacy function with a thumbturn and no key, and a hall or closet door needs a passage latch. Emtek builds the Winchester knob in those functions too, so ask for the Winchester privacy or passage set on the same rosette and finish to keep the house consistent. If you are matching across brands instead, the Pamex FTF Baron privacy knob is a Grade 3 option for 1-3/8 to 1-3/4 inch doors.

Handing is not a factor on the Winchester knob. A round knob is symmetrical, so it works on either hand of door. Handing only comes into play on Emtek's lever designs, where the lever has to point toward the hinge side correctly. What you do have to nail down on this order is backset, door thickness if over 1-3/4 inches, keyway and keying.

The Winchester family covers both: the 5102, 5103, 5104 and 5114 codes are the key in knob entry sets, and the 5152, 5153, 5154 and 5164 codes add a dummy knob, which is a fixed pull with no latch and no cylinder. Straight dummy trim from other makers works the same way - the BEST 6K Series single dummy trim is a Grade 2 non-keyed knob, the Schlage A170 single dummy trim is Grade 2 for 1-3/8 inch to 1-7/8 inch doors, and the Omnia 434/0 egg-shaped single dummy is solid brass. A dummy will not secure an entry door.

The Winchester is a sandcast bronze entry knobset with a Schlage C keyway as standard. Where the decorative bronze casting is not the point, the Kwikset 400P-CP Polo keyed entry knob is a Grade 3 entrance knob for 1-3/8 inch to 1-3/4 inch doors, the Master Lock BC Series biscuit knob is a Grade 3 keyed entry knob, and the Pamex FTF Baron is a Grade 3 entrance/office knob lockset for the same 1-3/8 inch to 1-3/4 inch range. Each is a keyed entry knob on a standard bored prep, without the sandcast bronze finish work.

The Winchester sandcast bronze knobset is an entry function with a single cylinder, which is not what a bed or bath door wants. For privacy on the interior doors, the Baldwin Estate 5077 Bethpage privacy knob with R027 rose and the Deltana 6112 St. Thomas privacy knob (1-3/8 inch to 2 inch doors) are decorative privacy knobs, and the Pamex FTF Baron privacy and Cal-Royal BER20 privacy Grade 3 knob locks cover the same function on a plainer trim.

The Winchester knobset is keyed with an entry function, so a hall or closet door does not need it. Passage knobs that latch without a key include the Baldwin Estate 5011 Colonial passage knob with 5058 rose and the Baldwin Estate 5000 Baltimore knob with 5048 rose passage lock, which comes preconfigured with a 2-3/8 inch backset and full lip strike matching the Winchester's standard 2-3/8 inch backset latch. On the commercial side, the Schlage D10S Orbit knob passage latch is Grade 1 heavy duty and the Dexter C2000 passage ball knob is Grade 2.

No. The Winchester is a complete key in knob bored lockset with a latch and single cylinder. The Sargent 78-2875 is an outside knob only with B design from the 7800 Series, and the Sargent 28C-KNOB is exit device trim with knob and rose in a classroom function for 1-3/4 inch doors. Both are trim that mounts to an exit device or existing lock chassis, not a standalone bored lockset, as is the Imperial USA ED-BKL580 knob trim in storeroom function.

The Winchester is a keyed single cylinder entry knobset using a Schlage C or optional Weiser WR5 cylinder. Where a key is the problem rather than the lock, the Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function for doors 1-3/16 inch to 2 inch thick, so entry is by code instead of a cylinder. It is a different look from sandcast bronze and does not accept the Schlage C keying the Winchester uses.

The knob and rosette are sandcast bronze, cast rather than stamped, which is where the surface texture and the weight in the hand come from. The lock chassis behind it is brass. Flat Black Bronze, Medium Bronze and Tumbled White Bronze are living finishes on cast bronze, so they will darken and highlight with handling over time rather than staying uniform.

The Winchester sandcast bronze knobset is ordered per opening, by rosette style and finish, with keyed alike available across the order. If a packaged combination is preferred over separate entry and passage sets, the Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes for 1-3/8 inch to 1-3/4 inch doors, matching the Winchester's door thickness range but not its bronze casting or rosette choices.