Emtek Sandcast Bronze Leversets - Yuma Lever, Dummy (Pair)

No boring needed. The Yuma sandcast bronze dummy set is surface mounted, so it screws onto the face of the door with no 2-1/8 inch cross bore or latch bore. That makes it a straightforward retrofit on a slab that has never been prepped, and it is why dummy trim is the usual choice for closet doors, french door inactive leaves, and pantry doors that hold shut on a ball catch or roller catch you supply separately.

It covers 1-3/8 inch to 1-3/4 inch doors, which spans the common older interior slab at 1-3/8 and the standard 1-3/4 inch door. Because it is a dummy, there is no spindle running through the door, so thickness only matters for matching the trim face on a pair application.

It does not. The Yuma dummy is a non-keyed, non-latching pull only, so the lever does not rotate a latchbolt and nothing holds the door closed on its own. You need a separate catch, magnet, or flush bolt for that. If you need the door to stay shut with the lever operating a latch, order a passage function instead.

The lever is cast with a fixed curve, so it points a set direction and cannot be flipped in the field. Left Hand and Right Hand are both offered. Stand outside the door (the side you push from): if the hinges are on your left, it is left hand. Ordering this as a pair gives you matching trim on both faces of one door, so pick the handing that suits the outside face.

Yes. The Yuma sandcast bronze dummy pair can be ordered with any Sandcast Bronze rosette, and five rose styles are offered: #1, #2, #3, #4 and #6. That lets you match the rose profile already used on the passage and privacy doors elsewhere in the house so the whole opening set reads the same.

It is a residential lever. If you are specifying for an office, school, or multi-family corridor where a grade is required, look at commercial dummy trim instead, such as the BEST 9K Series 1DT Grade 1 heavy duty single dummy or the Grade 2 BEST 7KC Series single dummy trim.

The Emtek Yuma sandcast bronze lever is a dummy set sold as a complete pair, which suits a double door or a pair of inactive leaves. For a single inactive leaf, the Baldwin Estate 5103 half dummy lever with 5048 rose is a dummy function lever offered as a handed part - BAL-5103-LDM is the left hand version and BAL-5103-RDM is the right hand version. Choose the half dummy when only one face of one door needs a lever.

A dummy lever like the Emtek Yuma is surface mounted with no door prep and does not latch or turn. If the door needs to stay closed, order a passage function lever instead. The Baldwin Estate 5103 passage lever with 5048 rose is the closest match in decorative styling, and on the commercial side the Falcon K101 is a Grade 1 passage cylindrical lock rated for 1-3/8 inch to 2-1/4 inch doors, while the Hager 2510 Withnell is a Grade 2 passage lever for 1-3/8 inch to 2 inch doors.

The pair gives you two levers and two rosettes, one for each face of the door. A single (half) dummy gives one lever for one face only. Use the pair on a french door inactive leaf or any door you pull from both sides; use a single dummy where only one face is ever touched, such as a closet. Comparable single dummy options include the Baldwin Estate 5103 half dummy, offered in left hand and right hand versions.

Three: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). All three are sandcast bronze from the Rustic Living line, so the surface carries the texture and colour variation of a sand mould rather than a plated, uniform look. If you are mixing faces, a split finish can be specified on the order.

The Yuma lever and the sandcast bronze rosettes carry across the Emtek Sandcast Bronze collection, so the same lever design and the same rose choices can be specified in passage and privacy functions in the same finish. Keep the rosette number and finish code consistent (for example #4 rosette in Medium Bronze) across every opening and the dummy will read identically to the working locks beside it.

No. The Corbin Russwin CL3110 is a Grade 1 vandal resistant cylindrical lever lock with passage/closet function and a fire rating, built for 1-3/4 inch to 2 inch doors. It operates a latch and requires bored door prep. The Emtek Yuma sandcast bronze lever is a non-keyed dummy that surface mounts with no door prep and fits 1-3/8 inch to 1-3/4 inch doors. They are not interchangeable in either direction.

The Emtek Yuma sandcast bronze lever is non-keyed dummy trim only. For a keyed entry opening, the Deltana 6201 Manchester and 6431 Linstead entry levers cover 1-3/8 inch to 2 inch doors on the decorative side. For commercial entry, the Hager 2525 is a Grade 2 cylindrical entry lock for 1-3/8 inch to 2 inch doors, and the Cal-Royal AG00 entrance lever is a Grade 2 with a 6-pin Schlage C keyway and 2-3/8 inch backset.

The Emtek Yuma sandcast bronze dummy pair is ordered as left hand or right hand. Baldwin handles handing by part number, with the Estate 5103 half dummy offered as a left hand and a right hand item. Several commercial passage levers avoid the question entirely: the Falcon B101 Grade 2 and the Falcon K101 Grade 1 both use a non-handed lever design.