Emtek SELECT Brass L-Square Faceted Lever - Dummy Set

No door prep is needed. The Emtek SELECT L-Square Faceted dummy lever set is surface mount, so it screws to the face of the door with no cross bore and no latch bore. There is no latch and no moving mechanism, it's a fixed pull for a closet door, a French door slab, or the inactive leaf of a pair.

It covers 1-3/8 inch to 1-3/4 inch doors, which spans the common interior slab and the standard 1-3/4 inch door. Since it is surface mounted rather than running a spindle through the door, thickness only affects the fastener, not the mechanism.

Yes, handing has to be called out. The Faceted lever is offered Left Hand (LH) and Right Hand (RH), and because the lever is a fixed one-piece trim it cannot be flipped in the field the way a reversible passage lever can. Stand outside the door: if the hinges are on your left it's left hand. On a pair of French doors you typically order one of each so both levers point away from the astragal.

That's what the SELECT system is for. The L-Square Faceted dummy can be ordered with any brass rosette, and the rosette choices are Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire. Pick the same rosette and finish you used on the passage and privacy sets down the hall and the openings read as one set.

The Emtek SELECT Brass L-Square Faceted lever is a dummy set listed for residential use. For a commercial opening calling for a graded dummy, the BEST 9K Series 1DT single dummy trim cylindrical lever is Grade 1 heavy duty and non-keyed, and the Accentra 455LN Augusta is a Grade 1 single dummy cylindrical lever in the 5400 Series. Both are dummy function like the Emtek, but carry a commercial ANSI grade.

The Baldwin Estate 5103 half dummy lever with 5048 rose is a dummy-function decorative lever and is offered handed, as the 5103 Left Hand Half Dummy and the 5103 Right Hand Half Dummy. That parallels the Emtek SELECT Brass L-Square Faceted dummy set, which is also ordered by hand, Left Hand (LH) or Right Hand (RH). The Emtek is a brass residential lever in a contemporary style with a choice of rosette, while the Baldwin comes with its 5048 rose.

The Emtek SELECT Brass L-Square Faceted lever is dummy function and surface mounts with no door prep, so it does not operate a latch. For a latching interior door in the same decorative residential vein, the Baldwin Estate 5103 is offered in a passage version and a privacy version, both with the 5048 rose. Passage latches without locking; privacy adds a bed and bath lock.

Seven: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). The finish applies to both the rosette and the stem. Unlacquered brass is a living finish and will darken with handling, so if you need the dummy to stay identical to a lacquered lever nearby, choose one of the other six.

No. It is non-keyed and has no latch, so it will not secure or even hold a door closed. For an opening that has to latch, order the passage, privacy, or keyed entry version of the lever instead, or a cylindrical lock such as the Callan Bentley Grade 2 dummy's keyed siblings if you need a commercial body.

They perform the same job on the door. The Callan Bentley BN5051 is a Grade 2 dummy lever and the BEST 7KC Series 1DT is a Grade 2 medium duty single dummy trim lever, both non-keyed dummy function like the Emtek SELECT Brass L-Square Faceted set. The difference is the finish and styling program: the Emtek is brass, contemporary, and ordered as a rosette and stem combination across Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford and Wilshire rosettes in seven finishes.

The Emtek SELECT Brass L-Square Faceted dummy set covers 1-3/8 inch to 1-3/4 inch doors and surface mounts with no door prep. If the door is thicker than that, latching levers with a wider range include the Hager 2510 Grade 2 passage lever at 1-3/8 inch to 2 inch, the Deltana 6201 Manchester at 1-3/8 inch to 2 inch, and the Falcon K101 Grade 1 passage lever at 1-3/8 inch to 2-1/4 inch.

If the dummy is going on the inactive leaf, the active leaf needs a latching lever. Straightforward non-keyed passage options include the Falcon B101 Grade 2 cylindrical passage lever with non-handed design, the Bravura Tampa BV333702 Grade 2 passage leverset with square trim, and the Kwikset 200BRNL Breton Grade 3 passage lever for 1-3/8 to 1-3/4 inch doors, which matches the door thickness range the Emtek Faceted dummy set covers.

Brass, both material and substrate, in the Faceted lever with an L-Square stem. It's a residential contemporary-style trim rather than a commercial cylindrical lock body.

Purely mechanical trim, no power, no wiring, no batteries. If you want a keypad lever on that opening instead, the Lockey 2835 mechanical pushbutton lever fits doors 1-3/16 to 2 inches thick and needs no power either.