Emtek SELECT Brass L-Square Tribeca Lever - Dummy Set

No door prep is needed. The Emtek SELECT Tribeca dummy lever is surface mounted, so it screws to the face of the door rather than going through a cross bore and latch bore. That makes it the usual choice for closet doors, French door inactive leaves, and pantry doors where you only need something to pull on.

Yes, handing is an order choice: left hand (LH) or right hand (RH). A lever is handed by the direction it sweeps down, so pick the hand that matches the other levers on the opening. On a pair of French doors you typically order one of each.

It is a residential product and a dummy, meaning it does not latch or lock at all. For a commercial opening that needs a real latch, look at a Grade 1 or Grade 2 cylindrical leverset instead: the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim if you specifically need dummy trim on a commercial door, and the Falcon K101 is a Grade 1 passage lever that fits 1-3/8 inch to 2-1/4 inch doors.

A dummy has no latch and no moving mechanism, so the lever is fixed and the door is held by a ball catch, roller catch, or magnetic catch. A passage lever has a working latch that retracts when you turn it. If the door already has a bored hole and a latch, you want a passage set, not this. Emtek's SELECT line covers passage and privacy in the same Tribeca lever, and on the commercial side the Accentra 5301LN Augusta is a Grade 2 passage lever.

The Baldwin Estate 5103 half dummy lever with 5048 rose is the closest decorative equivalent. Both are dummy function levers intended for a door leaf with no latch. The difference is in how handing is handled: Baldwin splits the Estate 5103 into separate left hand and right hand half dummy part numbers, while the Emtek Tribeca dummy set is ordered by choosing Left Hand (LH) or Right Hand (RH) on a single set. The Emtek is a brass lever from the SELECT Series with a choice of rosette shape, including Disk, Square, Quincy, Watford and Wilshire.

For commercial traffic, look at graded cylindrical dummy trim. The BEST 9K Series 1DT single dummy trim lever is Grade 1 heavy duty and non-keyed, and the BEST 7KC Series single dummy trim lever is Grade 2 medium duty. The Accentra 455LN Augusta single dummy is also a Grade 1 heavy duty cylindrical lever from the 5400 Series. The Emtek SELECT Brass L-Square Tribeca dummy set is a residential brass lever in the SELECT Series, so on an institutional spec that calls for an ANSI grade the BEST or Accentra dummies are the ones that answer it.

The Emtek SELECT Brass L-Square Tribeca dummy set is a surface mount, non-functioning pull with no latch and no door prep required, so it will not operate a door that needs to latch. For a working non-locking lever in a similar residential styling, the Baldwin Estate 5103 passage lever with 5048 rose is passage function. If you want the same door to lock from the inside, the Baldwin Estate 5103 privacy lever covers bed and bath. On the commercial side, the Accentra 5301LN Augusta is a Grade 2 passage cylindrical lever and the Dexter C1000 passage lever is Grade 1 with a door thickness range of 1-3/8 inch to 1-3/4 inch.

The Emtek SELECT Brass L-Square Tribeca dummy set is rated for doors 1-3/8 inch to 1-3/4 inch thick. For thicker leaves, the Deltana 6201 Manchester and 6431 Linstead entry levers cover 1-3/8 inch to 2 inch, the Hager 2510 Grade 2 passage lever covers 1-3/8 inch to 2 inch, and the Falcon K101 Grade 1 passage lever runs 1-3/8 inch to 2-1/4 inch. Those are latching levers rather than dummies, so on a thick door needing only a pull, confirm the leaf thickness before committing to the Emtek.

It is sold as a complete set. The Tribeca lever on the L-Square stem comes with the rosette you select, in the finish you select.

Seven brass rosettes are available: Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire. Because this is a SELECT Series product, you mix the rosette, stem, and lever yourself, so you can carry the same rosette across passage, privacy, and dummy openings for a consistent look.

If those doors use Emtek SELECT hardware, yes. SELECT is built around interchangeable parts, so ordering the same Tribeca lever on the L-Square stem with the same rosette and the same finish gives you a dummy that reads identically to the working sets down the hall. That is the usual approach for closet and French doors in a house where every other opening latches.

Neither. It is non-keyed and has no locking mechanism of any kind. If you need a thumbturn for a bedroom or bath, order a privacy set; if you need a key, you need a keyed entry lock, not dummy trim.

They serve the same opening but differ in how they are specified. The Callan Bentley is a Grade 2 dummy lever in the Bentley series. The Emtek SELECT Brass L-Square Tribeca dummy set is a brass residential lever ordered as a combination of Tribeca handle, L-Square stem, rosette shape and finish, with seven finishes including Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel - Lifetime (US14), Satin Brass (US4), Satin Nickel (US15) and Unlacquered Brass (US3NL). Choose the Callan if the job is written to an ANSI grade; choose the Emtek if the dummy has to match other Emtek trim on the same doors.

The Emtek SELECT Brass L-Square Tribeca dummy set is non-keyed and non-electronic; it is a tubular-style trim with no cylinder and no locking. If the opening needs access control, different products apply: the Delaney LP250 is a Grade 2 electronic keypad leverlock, and the Lockey 2835 is a mechanical pushbutton keyless lever with passage function covering 1 3/16 inch to 2 inch doors. For a keyed mechanical lever, the Cal-Royal AG00 entrance lever uses a 6-pin Schlage C keyway with a 2-3/8 inch backset and fits 1-3/8 inch to 1-3/4 inch doors.

Fire rated openings are typically specified with a labeled latching lockset rather than a surface mounted dummy, since the Emtek SELECT Brass L-Square Tribeca dummy set mounts to the face of the door with no door prep and no latch. Peers carrying a fire rating include the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever for 1-3/4 inch to 2 inch doors and the Falcon K101 Grade 1 passage lever. The Arrow MK02-TA privacy knob lock is also fire rated. Specify one of those where the door assembly is labeled.

Yes on the Emtek SELECT Brass L-Square Tribeca dummy set, which is ordered as Left Hand (LH) or Right Hand (RH), so the lever throw has to be called out at the time of order. Baldwin handles the Estate 5103 half dummy the same way, with separate left hand and right hand part numbers. If you want to avoid handing entirely on a latching opening, the Falcon B101 Grade 2 passage lever and the Falcon K101 Grade 1 passage lever both use a non-handed lever design, and the Kwikset 200DL Delta passage lever is reversible.

For rental turns where the trim does not need to match a designer package, the Kwikset 200BRNL RDT Breton passage lever is Grade 3 and fits 1-3/8 inch to 1-3/4 inch doors, and the Callan Asheville is a Grade 3 passage leverset in satin nickel. Both latch, unlike the Emtek SELECT Brass L-Square Tribeca dummy set, which is a surface mounted non-latching pull. If the closet is a double door where one leaf is fixed, the Emtek dummy or the Callan Bentley Grade 2 dummy lever is the right function for that fixed leaf.

The Emtek SELECT Brass L-Square Tribeca dummy set is an Art Deco styled, contemporary theme brass lever on an L-Square stem, with rosette choices that include Square, Modern Rectangular and Urban Modern. For a latching lever with squared trim, the Bravura Tampa with square trim passage leverset is Grade 2, and the Design Hardware X75 passage lockset uses a flat lever and is Grade 1 for 1-3/4 inch doors. Those are different manufacturers, so the finishes will not be an exact match to Emtek's US-coded brass finishes.