Emtek SELECT Brass T-Bar Tribeca Lever - Dummy Set

A dummy set is a fixed pull. The Tribeca lever with T-Bar stem has no latch and no working spindle, so it never retracts anything, it just gives you something to grab. Use it on a door that stays shut by other means: a closet door held by a ball catch or roller catch, an inactive leaf of a French pair, or a false door where you only want the handle to match. If the door needs to latch, you want a passage set instead, such as the Baldwin Estate 5103 Passage lever with 5048 rose. If it needs to lock from inside a bedroom or bath, that is a privacy set, like the Baldwin Estate 5103 Privacy.

No boring needed. The Tribeca dummy mounts to the face of the door, so there is no 2-1/8 inch cross bore and no 1 inch edge bore to drill and no latch mortise to cut. That makes it the usual choice for a door that was never prepped for hardware, or for the inactive half of a pair where you do not want to cut into the leaf. Fits doors 1-3/8 inch to 1-3/4 inch thick.

Handing here is purely which way the lever points. The Tribeca dummy comes as Left Hand (LH) or Right Hand (RH), and you pick so the lever throws away from the hinges, matching the working levers on the rest of the opening. Stand outside the door: if the hinges are on your left, that is left hand. On a pair of doors you generally order one of each so the two levers mirror.

Three choices. Handing, left or right. The rosette, from Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, or Wilshire. And the finish, which applies to both rosette and stem: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), or Unlacquered Brass (US3NL). Lever and stem are fixed, Tribeca lever on a T-Bar stem. It ships as a complete set, so there is nothing else to add for a single door.

The Emtek Tribeca T-Bar dummy is a residential brass dummy lever set. If the opening needs a commercial-rated dummy trim instead, the Accentra 455LN Augusta is a Grade 1 single dummy cylindrical lever lock, and the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim. Both are dummy function like the Emtek, but they are cylindrical lever locks with a published ANSI grade, where the Emtek is a residential brass set built around interchangeable rosettes.

A dummy set has no latch at all - the Emtek Tribeca T-Bar is surface mounted with no door prep. For a door that needs to latch and turn, the Baldwin Estate 5103 comes as a passage lever with the 5048 rose, and Accentra offers the 5301LN Augusta as a Grade 2 passage/closet cylindrical lever. Both operate a latchbolt; the Emtek dummy is a fixed pull.

That is what the rosette and finish choices are for. Order the Tribeca dummy in the same rosette shape and the same finish as the functioning sets on the rest of the run, and the fixed door reads identically to the doors that latch. The brass rosette range covers Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire, so most Emtek SELECT trim already on the job has a mate here.

Neither. It is non-keyed and non-electronic, with no cylinder, no thumbturn, and no way to secure the door. If you need a keyed opening in a similar residential lever, the Deltana 6201 Manchester or 6431 Linstead entry levers cover 1-3/8 inch to 2 inch doors. For a bathroom or bedroom that needs a push-button lock, a privacy set such as the Kwikset 300BRNL Breton, rated for 1-3/8 to 1-3/4 inch doors, is the right function.

The Tribeca dummy is sold as a complete set for one door. If your job specifically calls out a half dummy, meaning trim for one face only, the Baldwin Estate 5103 half dummy is offered as a left hand and a right hand version, and BEST catalogues its single dummy trim as the 9K 1DT and 7KC 1DT.

Yes. The Emtek Tribeca T-Bar dummy is ordered left hand or right hand. Baldwin splits the same idea into two part numbers: the Estate 5103 left hand half dummy lever with 5048 rose and the Estate 5103 right hand half dummy lever with 5048 rose. Order the Baldwin by hand the same way you would specify LH or RH on the Emtek.

It will mount, but it works differently. The Emtek Tribeca T-Bar dummy is surface mounted with no door prep and no latch. A passage lever such as the Hager 2510 Grade 2 passage cylindrical lever or the Falcon B101 Grade 2 cylindrical passage lever bores into the door and throws a latchbolt, so the leaf latches shut rather than sitting free. On an inactive leaf or a closet door held by a catch or roller, the dummy is the fixed-trim answer.

A dummy set does not lock. For privacy function on a matched-looking lever, the Baldwin Estate 5103 privacy lever with 5048 rose and the Kwikset 300BRNL RDT Breton privacy lever set both cover bed and bath, with the Kwikset listed Grade 3 for 1-3/8 inch to 1-3/4 inch doors. The Emtek Tribeca T-Bar fits the same 1-3/8 inch to 1-3/4 inch range, so you can pair a privacy lever on the bathroom with the dummy on the closet in the same room.

The Emtek Tribeca T-Bar dummy covers 1-3/8 inch to 1-3/4 inch doors. On heavier leaves, look at cylindrical levers built for the thicker range: the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever and the Arrow GL01 Grade 2 Sierra passage lever both cover 1-3/4 inch to 2 inch, and the Falcon K101 Grade 1 passage lever covers 1-3/8 inch to 2-1/4 inch. Those are latching passage functions rather than fixed dummy trim.

Trim-only and keypad parts get grouped with dummy levers and behave nothing like one. The Imperial USA ED-EL500HD is heavy duty escutcheon lever trim for an exit device, and the Corbin Russwin 585F715 is a Grade 1 lock lever for an ED8000 pushpad exit device - both are trim for a device, not standalone door hardware. The Lockey 2835 and the Delaney LP250 keypad leverlock are keyless entry levers with a code mechanism. The Emtek Tribeca T-Bar is a non-keyed, non-electronic dummy set.

Both the substrate and the material are brass. Six of the seven finishes are plated or coated and hold their look. The seventh, Unlacquered Brass (US3NL), is bare brass with no clear coat, so it will darken and patina with handling. Order it deliberately if you want that, and pick Satin Brass (US4) if you want a brass tone that stays put.

The Emtek Tribeca T-Bar dummy can be ordered with a Square, Modern Rectangular or Urban Modern rosette. For a squared trim in a latching function, the Bravura Tampa is a Grade 2 passage leverset with square trim; the Bravura Atlanta and Orlando use round trim in the same Grade 2 passage function.

The Emtek Tribeca T-Bar dummy is offered in Satin Brass (US4) along with Flat Black, Oil Rubbed Bronze, Polished Chrome, Polished Nickel, Satin Nickel and Unlacquered Brass. For a latching lever in the same US4 satin brass, the Bravura Miramar with round trim is a Grade 2 passage leverset in US4 Satin Brass.

Tribeca is an Art Deco lever on a contemporary T-Bar stem, meaning the lever meets the rosette on a straight bar rather than a curved or return neck. It reads clean and geometric, and the square, Modern Rectangular, and Urban Modern rosettes lean into that, while Quincy, Watford, and Wilshire soften it.