Emtek SELECT Brass T-Bar Faceted Lever - Dummy Set

A dummy set is a pull only. The Emtek SELECT T-Bar Faceted lever is fixed in place, it does not turn and there is no latch behind it, so it holds nothing shut. Use it on a door held by a ball catch, roller catch or magnetic catch, or on the inactive leaf of a French pair. If you need the door to stay closed on its own with a latch you can operate, order a passage function set instead, not a dummy.

No door prep is needed. The Faceted dummy set is surface mounted, so it fastens to the face of the door without a 2-1/8 inch cross bore or a latch bore. That makes it the easy retrofit on a slab that was never drilled, and it is why a dummy is often the fix for an inactive French door leaf.

Yes. The T-Bar Faceted dummy set covers 1-3/8 inch through 1-3/4 inch doors, which spans the common older interior slab at 1-3/8 and the standard 1-3/4 inch door. Thicker than 1-3/4 and it is out of range.

It is handed. Order Left Hand (LH) or Right Hand (RH). Stand outside the door, on the side it swings away from: if the hinges are on your left it is left hand, hinges on the right is right hand. On a French pair, hand each leaf separately so the levers sweep the way you want.

Yes, and that is the point of the SELECT system. The Faceted lever on the T-Bar stem can be paired with any of seven brass rosettes: Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford and Wilshire. Round rosettes like Disk and Quincy soften the look, Square and Modern Rectangular carry the contemporary faceted geometry through. Match whatever rosette shape you already ran on the other openings.

Not this one. The Faceted dummy is non-keyed with no latch mechanism at all. For a hall or closet door that needs to latch, order the passage version of the lever; for a bed or bath, the privacy version with a thumbturn. If you want a decorative brass lever in a matched family across functions, the Baldwin Estate 5103 runs half dummy, passage and privacy on the same 5048 rose.

The Emtek SELECT Brass T-Bar Faceted lever is a dummy set built in brass and catalogued for residential use, so for a high-traffic commercial opening look at the BEST 9K Series 1DT single dummy trim cylindrical lever, a Grade 1 heavy duty non-keyed dummy, or the Accentra 455LN Augusta heavy duty Grade 1 single dummy lever from the 5400 Series. Both give you the same non-latching dummy function in a certified Grade 1 body.

The Emtek SELECT Brass T-Bar Faceted set is dummy function, meaning it is surface mounted with no latch. If the door needs to latch closed, choose a passage lever such as the Baldwin Estate 5103 Passage Lever with 5048 Rose, the Accentra 5301LN Augusta Grade 2 passage lever, or the Kwikset 200BRNL RDT Breton Grade 3 passage lever, which fits doors 1-3/8 inch to 1-3/4 inch. For a bed or bath door, the Baldwin Estate 5103 Privacy Lever with 5048 Rose adds a privacy turn.

The Emtek SELECT Brass T-Bar Faceted dummy set covers door thicknesses of 1-3/8 inch to 1-3/4 inch. For a 2 inch door, look at the Hager 2510 Grade 2 passage lever rated 1-3/8 inch to 2 inch, the Deltana 6201 Manchester entry lever at 1-3/8 inch to 2 inch, or the Falcon K101 Grade 1 passage lever, which covers 1-3/8 inch to 2-1/4 inch.

It ships as a complete set: the Faceted lever on a T-Bar stem with the rosette you choose. One set covers one side of one door, so for both leaves of a French pair, or both faces of a single door, order two.

Seven: Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15) and Unlacquered Brass (US3NL). The finish applies to both the rosette and the stem, so the set reads as one piece. Note that Unlacquered Brass is a living finish and will patina with handling, so if you are matching an existing US3NL opening expect the new lever to start brighter.

Yes. The Emtek SELECT Brass T-Bar Faceted dummy set is ordered as left hand or right hand. The Baldwin Estate 5103 half dummy lever with 5048 rose is also sold by hand, as a left hand version and a right hand version ordered separately, so it covers the same handed decorative dummy application.

The Emtek SELECT Brass T-Bar Faceted dummy set is a contemporary brass lever with a choice of rosettes including Disk, Square, Quincy and Watford. If the trim style is not driving the job, the BEST 7KC Series single dummy trim cylindrical lever is a Grade 2 medium duty non-keyed dummy, and the Callan Bentley is a Grade 2 dummy lever - both are utility dummy trims without the decorative rosette program.

No. The Emtek SELECT Brass T-Bar Faceted set is non-keyed dummy function with no latch or cylinder. For a keyed opening choose a keyed lever such as the Cal-Royal AG05 Grade 2 storeroom lever with deadlocking latchbolt, the Dexter C1000 Grade 1 classroom lever, or the Hager 2525 Grade 2 cylindrical entry lever for doors 1-3/8 inch to 2 inch.

No. The Emtek SELECT Brass T-Bar Faceted dummy set is surface mount with no door prep required, so there is no bore or latch mortise to cut. Bored lever locks like the Design Hardware X75 Grade 1 passage lever or the Arrow GL01 Grade 2 Sierra passage lever require a standard cylindrical bore and latch prep instead.

Brass, both as the material and the substrate, across all seven finishes. That matters on unlacquered and satin brass in particular, where the finish is the metal rather than a coating over pot metal, and on high-touch doors where a plated zinc lever wears through at the grip.

The Emtek SELECT Brass T-Bar Faceted set is a non-electronic dummy with no code or key access. For keyless code entry, the Lockey 2835 mechanical pushbutton keyless lever offers passage function and ADA compliance for doors 1-3/16 inch to 2 inch, the Lockey 1150 heavy duty mechanical keypad lever covers 1-1/8 inch to 2 inch, and the Delaney LP250 is a Grade 2 electronic keypad leverlock.