Emtek SELECT Brass R-Bar Faceted Lever - Dummy Set

It covers 1-3/8 inch to 1-3/4 inch doors, which spans standard interior residential doors and 1-3/4 inch solid core slabs.

Yes. The Faceted lever is ordered left hand (LH) or right hand (RH). Stand outside the door: if the hinges are on your left it's left hand. A dummy is fixed and does not rotate, so the handing you pick is purely which way the lever points, and it cannot be flipped later.

Yes, within the Emtek SELECT program. The Faceted lever on an R-Bar stem is offered in seven finishes, Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Lifetime Polished Nickel (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL), and in seven rosettes, Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire. Spec the same finish and rosette as the working locksets and the closet doors read identical to the bedroom doors.

It is a residential product. For a commercial corridor or an institutional facility where a graded dummy trim is specified, look at the BEST 9K Series 1DT single dummy trim, a Grade 1 heavy duty non-keyed lever, or the BEST 7KC Series 1DT in Grade 2 medium duty.

A dummy is a fixed pull, no latch, no moving parts. It just gives you something to grab on a door held shut by a roller catch or ball catch. A passage lever actually retracts a latchbolt and holds the door closed. If the door needs to stay shut on its own, order a passage set instead, like the Baldwin Estate 5103 passage lever with 5048 rose or the Bravura Atlanta round trim passage leverset.

The Emtek SELECT Brass R-Bar Faceted dummy set covers door thicknesses of 1-3/8 inch to 1-3/4 inch. For a 2 inch door, the Hager 2510 Grade 2 passage cylindrical lever covers 1-3/8 inch to 2 inch, and the Dexter C1000 asylum function Grade 1 lock covers 1-3/8 inch to 2 inch as well. Deltana's 6201 Manchester, 6411 Morant and 6431 Linstead entry levers are also rated 1-3/8 inch to 2 inch if you want a decorative look at that thickness.

The Emtek SELECT Brass R-Bar Faceted Lever dummy set is a residential brass leverset. For a heavy duty commercial opening, the Accentra 455LN Augusta is a Grade 1 single dummy cylindrical lever lock in the 5400 Series, and the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim cylindrical lever. Both are dummy function like the Emtek, so the door is still non-latching and non-keyed, but they carry an ANSI/BHMA Grade 1 rating for institutional and MRO specs that call one out.

The Emtek SELECT Brass R-Bar Faceted Lever dummy set is surface mounted with no door prep and has no latch, so it will not hold a door closed. If the opening needs a latching lever, comparable non-keyed passage levers include the Baldwin Estate 5103 Passage Lever with 5048 Rose, and if the room needs a thumbturn, the Baldwin Estate 5103 Privacy Lever with the same 5048 rose. Both keep a decorative brand-name residential look while giving you a working latch.

The Emtek SELECT Brass R-Bar Faceted Lever is a residential dummy set with no latch. Where a fire-rated leverset is required, look at the Falcon K101, a Grade 1 heavy duty passage cylindrical lock with non-handed levers, fire rated, for doors 1-3/8 inch to 2-1/4 inch, or the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever, also fire rated, for 1-3/4 inch to 2 inch doors.

It ships as a complete set with the R-Bar stem, Faceted lever, and the rosette you choose. Order one set per side you want trimmed out, so a pair of french doors or a double closet opening needs two.

Brass, both as the stated material and the substrate, which is why it carries brass finishes like Unlacquered Brass (US3NL) that patina over time rather than a coating over pot metal.

The Baldwin Estate 5103 is the closest decorative equivalent, sold as a left hand half dummy or a right hand half dummy with the 5048 rose. Like the Emtek Faceted, you pick the hand at order time. For a lower-cost dummy in a builder line, the Callan Bentley is a Grade 2 dummy lever.

Neither. It is non-keyed and non-electronic, with no cylinder, no thumbturn, and no latch to operate. For a bathroom or bedroom you want a privacy set, not this.

Yes, any brass rosette in the SELECT program pairs with it. The choices are Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford, and Wilshire, so you can run a square rose on a contemporary job or a Wilshire on something more traditional without changing the lever.

They fill the same role but are ordered differently. The Emtek SELECT Brass R-Bar Faceted dummy is sold as a complete set and is chosen by handing, left hand or right hand. The Baldwin Estate 5103 half dummy is ordered as a specific hand up front - BAL-5103-LDM is the left hand half dummy and BAL-5103-RDM is the right hand, each with the 5048 rose. The Emtek also lets you pair the Faceted lever with any of seven brass rosettes, including Disk, Square, Quincy and Wilshire, which the Baldwin does not offer.

When the opening just needs a pull and the finish does not have to match a brass decorative program, the Callan Bentley is a Grade 2 dummy lever, and the BEST 7KC Series single dummy trim is a Grade 2 medium duty non-keyed dummy cylindrical lever. Both are dummy function like the Emtek SELECT Brass R-Bar Faceted set, but the Emtek is solid brass with seven finishes including Unlacquered Brass and Oil Rubbed Bronze, which is what you give up.

Passage levers are the usual mix-up. The Accentra 5301LN Augusta Grade 2, the Arrow GL01 Grade 2 Sierra lever and the Falcon B101 Grade 2 non-handed passage lever all read as non-keyed levers like the Emtek SELECT Brass R-Bar Faceted set, but each carries a working latch and requires standard bore door prep. The Emtek dummy is surface mount with no door prep and no latch - swapping one for the other changes the door prep and whether the door stays closed.

The Emtek SELECT Brass R-Bar Faceted Lever is a non-electronic, non-keyed dummy set, so it offers no access control at all. For keyless entry on a lever, the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for 1-3/16 inch to 2 inch doors, the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination for 1-1/8 inch to 2 inch doors, and the Delaney LP250 is a Grade 2 electronic keypad leverlock.

The Emtek SELECT Brass R-Bar Faceted dummy is a residential decorative set ordered by handing, finish and rosette, which makes it a design choice rather than a fleet standard. Properties standardizing across many closet and French door leaves often go to the BEST 7KC Series single dummy trim, a Grade 2 medium duty non-keyed dummy, or step up to the BEST 9K Series 1DT Grade 1 heavy duty dummy trim where corridor traffic is higher. Both come from a single commercial series, so the trim stays consistent building to building.

The Emtek SELECT Brass R-Bar Faceted dummy set offers Satin Brass (US4) among its seven finishes. If you need a latching passage lever in the same finish call-out, the Bravura Miramar with round trim is a Grade 2 passage leverset in US4 Satin Brass. Bravura also lists the Atlanta and Orlando with round trim and the Tampa with square trim as Grade 2 passage leversets if the rosette shape needs to match a square or rectangular Emtek rose.