Emtek SELECT L-Square Tribeca Key In Lever - Dummy (Pair)

It's dummy trim. The Tribeca key-in lever dummy pair mounts to the door surface with no latch and no turning mechanism, so there is nothing to lock. It's used on closet and pantry doors that hold shut with a magnetic or roller catch, or on the inactive leaf of a double door. If you need a lever that actually locks with a key, order the entry function version of the same design instead.

No door prep is needed. The Tribeca dummy is surface mounted, so it fastens to the face of the door without a 2-1/8 inch cross bore or a latch bore. That makes it the usual choice when you're adding pull hardware to a slab door that was never drilled.

Handing is required on Emtek leversets because the lever has to point toward the latch edge, not the hinge edge. Stand on the outside of the door: if the hinges are on your left, it's left hand (LH); hinges on the right, it's right hand (RH). Those are the two choices offered. On a pair sold for one door, the handing covers both sides.

Four things: handing (LH or RH), rosette shape, finish, and door thickness if it's over 1-3/4 inch. The rosette comes as Square, Disk, or Modern Rectangular. The stem is fixed as Key In L-Square (KLS) and the lever is Tribeca. There's also an optional split finish field if you want a different finish inside versus outside.

It's a residential product, brass body, contemporary styling, and it carries no commercial duty grade. For a commercial opening use a graded cylindrical lock instead, such as the BEST 9K Series 1DT Grade 1 dummy trim or the Grade 2 BEST 7KC Series 1DT dummy. Those are built for institutional traffic; the Emtek SELECT line is aimed at homes and high-end residential.

For a decorative residential dummy in a traditional rather than contemporary style, the Baldwin Estate 5103 half dummy lever with the 5048 rose is a dummy-function lever offered in handed versions - BAL-5103-LDM for left hand and BAL-5103-RDM for right hand. The Emtek SELECT Tribeca key-in lever dummy is sold as a pair with handing specified at order, in a contemporary style, with a choice of Disk, Square, or Modern Rectangular rosette. The Baldwin pieces are single half dummies, so a double-sided application takes two.

The Emtek SELECT Tribeca key-in lever dummy is a residential brass leverset. For commercial specifications calling out an ANSI grade, the BEST 9K Series 1DT single dummy trim is a Grade 1 heavy duty non-keyed dummy, and the BEST 7KC Series single dummy trim is a Grade 2 medium duty version. The Accentra 455LN Augusta is another Grade 1 heavy duty single dummy cylindrical lever. Each of those is single dummy trim, while the Emtek is supplied as a pair.

A dummy lever is surface mounted trim with no latch, so for a door that has to stay shut you need a latching function. Within the same decorative family, the Baldwin Estate 5103 is offered as a passage lever and as a privacy lever on the 5048 rose. For a keyed opening, the Deltana 6201 Manchester and 6431 Linstead are entry-function levers covering 1-3/8 inch to 2 inch doors. The Emtek Tribeca dummy itself is surface mount with no door prep required.

That's the point of the SELECT system. The Tribeca lever with the Key In L-Square stem is offered across functions, so you can run the same lever and rosette on a keyed single cylinder entry door and carry the identical look onto a closet door with this dummy. Keep the finish and rosette selection consistent across the openings and the hardware reads as one set.

Eight: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Lifetime Polished Nickel (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered brass and French antique will change with handling over time, which is expected behavior, not a defect. If you're matching existing Emtek hardware in a house, match the US code rather than the name.

No. The Kwikset 200BRNL RDT Breton is a Grade 3 passage/hall/closet leverset for doors 1-3/8 inch to 1-3/4 inch, meaning it has a working latch and turns to retract it. The Emtek SELECT Tribeca key-in lever dummy is a non-operating pair that mounts to the door surface with no door prep. They are not interchangeable on the same opening unless you change the door prep to suit.

The Callan Bentley is a Grade 2 dummy lever, and the BEST 7KC Series single dummy trim is a Grade 2 medium duty non-keyed dummy - both are plainer trim than the faceted contemporary Emtek SELECT Tribeca, which is brass with a choice of eight finishes including Flat Black, Oil Rubbed Bronze, and Satin Nickel. Note the Callan and BEST items are single dummies while the Emtek ships as a pair.

They change the shape of the plate that sits against the door under the lever, not the function or the mounting. Disk is round, Square is a squared plate, and Modern Rectangular is an elongated rectangle. All three are offered with the Tribeca lever on the Key In L-Square stem, so pick whichever matches the rest of the trim in the room. Mixing rosette shapes between doors in the same sightline is the most common regret on these.

Brass, both the body and substrate. That's what lets it carry live finishes like Unlacquered Brass (US3NL) and Lifetime Polished Nickel (US14), and it's a heavier feel in the hand than a plated zinc residential lever.

Yes, there's an optional split finish field on the order. Name the finish you want on each face there. It's common on an entry where the exterior has to match other outdoor hardware while the interior follows the room. Without an entry in that field, both levers ship in the single finish selected.

Not as a visual match. The Lockey 2835 mechanical pushbutton keyless lever lock is a passage-function keyless set fitting doors 1-3/16 inch to 2 inch, and the Lockey 1150 heavy duty mechanical keypad lever set covers 1-1/8 inch to 2 inch; the Delaney LP250 is a Grade 2 electronic keypad leverlock. Those carry keypad housings on the exterior face, whereas the Emtek SELECT Tribeca dummy is decorative brass trim in a contemporary faceted design.