Emtek SELECT L-Square Faceted Key In Lever - Dummy (Pair)

Levers are handed because the lever has to point back toward the hinge side of the door. Emtek requires handing on all leversets, and the SELECT Faceted dummy is offered Left Hand (LH) and Right Hand (RH). Stand on the outside of the door: if the hinges are on your left it's LH. Since this is sold as a pair, one set covers both faces of a single door.

Yes. The stated door thickness range is 1-3/8 inch to 1-3/4 inch, which covers both the standard 1-3/4 inch commercial or exterior leaf and the thinner 1-3/8 inch interior doors common in older homes. Anything thicker than 1-3/4 inch has to be called out at the time of order.

It does not. A dummy set is a pull only, with no latch, no spindle turn, and no strike. If you need the door to stay shut you'll want a passage set, or a privacy set for a bath or bedroom. In the Baldwin Estate 5103 family the same lever is available as a passage or a privacy set, so you can keep one design across doors that need different functions.

The Emtek SELECT Faceted key-in lever dummy is a residential brass trim set. For a graded commercial dummy, the BEST 9K Series 1DT single dummy trim is Grade 1 heavy duty and non-keyed, and the BEST 7KC Series 1DT single dummy trim is Grade 2 medium duty. The Accentra 455LN Augusta from the 5400 Series is another Grade 1 single dummy cylindrical lever. All three are single dummy trims, so a pair of doors needs two; the Emtek is sold as a handed pair.

The Baldwin Estate 5103 half dummy is the nearest decorative counterpart, and like the Emtek it is handed - Baldwin sells it as a left hand half dummy and a right hand half dummy as separate items, so a pair of doors takes one of each. The Emtek SELECT Faceted dummy ships as a pair and is specified by handing, left hand or right hand, with the Faceted lever on a Disk, Square, or Modern Rectangular rosette. The Emtek is brass and offered in eight finishes including Flat Black, Oil Rubbed Bronze, Polished Nickel, Satin Brass, Satin Nickel, and Unlacquered Brass, and it surface mounts with no door prep. The Baldwin 5103 uses the 5048 rose.

A dummy set has no latch, so if the door must latch you need a functioning lever. In the same decorative family, the Baldwin Estate 5103 is offered as a passage lever and as a privacy lever, both on the 5048 rose. Deltana entry levers such as the 6201 Manchester, 6411 Morant, and 6431 Linstead cover 1-3/8 inch to 2 inch doors with an entry function. The Emtek SELECT Faceted set is surface mounted with no door prep, while a latching lever requires a bored door prep.

Three rosette shapes: Square, Disk, and Modern Rectangular. The handle is the Faceted (FA) design on the Key In L-Square (KLS) stem, so if your working doors elsewhere in the house already use that SELECT lever and rosette combination, the dummy will read the same on the closet or inactive door.

Eight: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel Lifetime (US14), Satin Brass (US4), Satin Nickel (US15), and Unlacquered Brass (US3NL). Unlacquered Brass is a living finish and will darken with handling, so use it only where you want that patina. A split finish can also be called out if you need the two faces to differ.

Baldwin's Estate 5103 half dummy with the 5048 rose is the closest decorative alternative, and it's handed the same way, ordered as a left hand or right hand half dummy rather than a pair. Callan's Bentley BN5051 is a Grade 2 dummy lever if you want a plainer, more utilitarian look.

Only if the door is prepped for one. A passage lever like the Kwikset 200BRNL Breton, the Hager 2510 Withnell for 1-3/8 inch to 2 inch doors, or the Grade 1 Dexter C1000 passage for 1-3/8 inch to 1-3/4 inch doors includes a latch and needs a bore and latch prep in the edge of the door. The Emtek SELECT Faceted dummy pair is surface mounted with no door prep required and serves as a pull on doors held by a roller catch or magnetic catch.

The Emtek SELECT Faceted set uses the Key In L-Square (KLS) stem, which is the key-in-lever body style for the family, but a dummy pair is non-functioning trim and does not operate a latch. If the opening needs a working keyed lever, the Cal-Royal AG00 entrance lever comes with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset for 1-3/8 inch to 1-3/4 inch doors, and the Hager 2525 is a Grade 2 cylindrical entry lock for 1-3/8 inch to 2 inch doors.

The Emtek SELECT Faceted key-in lever dummy pair is a residential brass set in a contemporary style. For higher traffic openings, the BEST 9K Series 1DT single dummy trim is Grade 1 heavy duty, and if the door must function, the Falcon K101 is a Grade 1 heavy duty passage with fire rating covering 1-3/8 inch to 2-1/4 inch doors, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage, fire rated, for 1-3/4 inch to 2 inch doors.

Brass. Both the material and substrate on the SELECT Faceted lever are brass, which is what lets Emtek offer it in an unlacquered brass living finish. It is a residential-duty product, not a commercial cylindrical lock body.