Emtek Traditional Brass Paper Holder - Spring Rod Style

That is the point of the rosette axis. The Emtek Traditional Brass spring rod paper holder is ordered with one of twelve rosette styles: Regular, Small Regular, Rope, Oval, Rectangular, Arts & Crafts Rectangular, Ribbon & Reed, #8, Lancaster, Quincy, Watford and Wilshire. Pick the rosette that matches the door hardware rosettes on the same floor and the bath accessory reads as part of the same set.

Spring rod. Two posts with a sprung roller between them, so the roll is captured on the rod and you reload by compressing the rod. If you want the open single-arm euro type that you drop a roll onto without removing anything, look at the Sure-Loc Baden or Boulder wall mounted euro paper holders, or the Orca Hardware 3655 Swirl and 5255 Ripple euro holders.

It is built at 3-3/8 inches, which is the between-posts dimension a standard roll sits in. Rough in your blocking or anchors for that spread; it is the only size offered, so there is no wide or extended version to specify.

The Emtek Traditional Brass Paper Holder is a wall mount, brass, spring rod style holder. The closest solid brass alternatives are the Deltana 98C2001, a Classic double post toilet paper holder in solid brass from the 98C Series, and the Deltana 88DTPH from the 88 Series, also solid brass. Both are two-post designs that carry a roller between posts, the same basic arrangement as a spring rod holder, while the Emtek pairs its posts with a selectable decorative rosette.

The Emtek Traditional Brass Paper Holder is a spring rod style that carries the roll on a rod between mounts. If the wall or vanity return only allows a single mounting point, single post options include the Deltana 55D2001 from the 55D Series in solid brass, the Deltana BBN2001 from the BBN Series, and the Sure-Loc Brighton single post paper holder. These hold the roll on a cantilevered post, so the roll loads from the open end rather than by compressing a rod.

Nine: Flat Black (US19), French Antique (US7), Oil Rubbed Bronze (US10B), Pewter (US15A), Polished Brass Lifetime (US3), Polished Chrome (US26), Polished Nickel (US14), Satin Nickel (US15) and Unlacquered Brass (US3NL). Unlacquered brass will patina over time; the lifetime polished brass is the one to specify if you want the shine held.

It is a residential-rated brass accessory, built for homes and finished units rather than public restrooms. For high-traffic commercial washrooms you want a heavy-duty commercial accessory line instead. For an owner-occupied home, a condo, or a higher-end rental where the bath hardware is expected to match the door hardware, this is the right class of part.

Wall mount, through the two rosettes. Each rosette anchors to the wall and the sprung rod bridges between them, so you need solid backing or proper drywall anchors at both points spaced for the 3-3/8 inch rod. On a tile wall, set your anchor locations before drilling since both posts must land level with each other or the rod binds.

Among solid brass post holders, Deltana offers the 55D2001 single post (55D Series), the BBN2001 single post (BBN Series), the 88DTPH (88 Series) and the 98C2001 classic double post (98C Series). Sure-Loc has the Basic 2-Post and the Brighton single post. Those are simpler in that you are not selecting a rosette style to coordinate with door hardware; the Emtek is the one to pick when the bath accessories need to match knob and lever rosettes.

The Emtek Traditional Brass Paper Holder is a traditional style piece with decorative rosette choices such as Ribbon and Reed, Rope, and Lancaster. For a plainer look, the Sure-Loc Basic 2-post paper holder keeps the same two-post roller arrangement without the decorative backplate, and the Sure-Loc Baden and Boulder are wall mounted Euro style holders that use an open arm instead of a rod between posts.

No. The Orca Hardware 3655 Swirl and Orca Hardware 5255 Ripple are Euro style toilet paper holders, which carry the roll on an open arm rather than a spring rod captured between two posts. The Emtek Traditional Brass Paper Holder is a spring rod design in brass, so it loads by compressing the rod between the mounts. The mounting footprint and the way the roll is changed both differ, so a Euro holder is a style alternative rather than a like-for-like swap.

The Orca Hardware 2752 from the 27-Cypress Series and the Orca Hardware 4852 Blakely both ship with a plastic tube for the roll. The Emtek Traditional Brass Paper Holder uses a spring rod and is a brass product. If a facility replaces roller tubes often and prefers a low cost consumable roller, the Orca pieces cover that; if the roller itself needs to match the brass trim, the Emtek spring rod style is the one to specify.

The Emtek Traditional Brass Paper Holder is offered in nine finishes including Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel (US14), Satin Nickel (US15), Polished Brass Lifetime (US3), and Unlacquered Brass (US3NL), plus twelve rosette designs, so it can be matched to an existing Emtek trim program across a set of units. It is designated for residential use. Where the spec is driven by series rather than trim match, Deltana offers the 88DTPH in the 88 Series and the 98C2001 in the 98C Series, and Sure-Loc offers the Basic, Baden, Boulder, and Brighton families.

Solid brass, substrate and material both. Brass is the standard for bath accessories in a wet room because it does not rust the way plated steel does. In a bathroom that gets heavy steam, the plated finishes (polished chrome, satin nickel, polished nickel) are the most forgiving; unlacquered brass is intentionally live and will darken.

One part. You specify finish and rosette together when you order, and the holder ships as a complete wall-mount unit in that combination. There are nine finishes and twelve rosettes, so decide both before you place the order rather than after.