Emtek Wrought Steel Lafayette 8" Door Pull

The Lafayette pull is 8 inches center to center on the fasteners, 8 inches overall height, and projects 2 inches off the face of the door. That 2 inch projection is what gives you hand clearance, so check it against any adjacent casing or a wall the door swings against before you drill.

Three mounting styles are offered. Standard mounting is thru-bolt with decorative caps on the back side. Back-to-Back (BTB) pairs two pulls through the same fasteners so you get a matching pull on both faces. Concealed Surface (CS) mounts to one face without fasteners showing through, which is the one to pick when the back of the door is finished and you don't want caps on it.

Yes, enter it on the order. Thru-bolt and back-to-back mounting run fasteners all the way through the slab, so the bolt length has to match the door. There's a door thickness field on the order for exactly that reason. Concealed surface mounting is the one style where thickness matters least, since it fastens to a single face.

Order the Back-to-Back (BTB) mounting option rather than two standard pulls. BTB ships as a set that shares fasteners through the door, so the two pulls line up and there are no decorative caps on either face. The standard version is single-sided with caps showing on the reverse.

The Ives 8145EZHD is a 45 degree offset door pull with heavy duty mounting hardware and is described as ADA compliant. The Emtek Lafayette 8 inch wrought steel pull is a residential grip with a 2 inch projection and does not carry that designation, so on an opening where the accessibility spec drives the selection the 8145EZHD is the one to quote.

The Emtek Lafayette is offered in a back-to-back mounting option in Flat Black Steel and Satin Steel. For a back-to-back set from another line, the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, and the Sure-Loc PL-2KN is a knurled long door pull in a double-sided configuration. Deltana also offers the SSPOBB24 24 inch back-to-back modern offset pulls for a longer bar.

It's catalogued as a door or appliance pull, so an appliance panel is a legitimate use. The 8 inch center to center spacing is the number to check against your panel's existing bore pattern, and appliance panels are usually thinner than a door slab, so the thru-bolt length needs to suit that thickness.

The Lafayette is an 8 inch pull only. For a longer grip on an entry or barn door, the Sure-Loc Round Long Door Pull is single-sided with a choice of concealed or thru-bolt mounting, and the Deltana SSP1210 is a 12 inch contemporary single-side pull. If you want length plus both faces covered, the Sure-Loc Knurled Long Door Pull comes double-sided.

The Emtek Lafayette is a wrought steel pull offered in Flat Black Steel and Satin Steel. If the spec calls for stainless, the ABH AB7200 is a solid stainless steel flat end pull handle, 7/8 inch diameter, with through-bolt mounting, which matches the Lafayette's thru-bolt approach. The Cal-Royal PUL-175 is also stainless construction but it is a night latch cylinder pull at 3-1/2 inch height, a different function entirely.

No. The Trimco 1001-1 is a heavy duty push plate measuring 3 inches by 12 inches and the Trimco 1041 is a half-round push plate 8 inches by 16 inches - flat plates you press, with no grip. The Emtek Lafayette is a grip-style pull with an 8 inch center to center and 2 inch projection for pulling the door. If the door swings both ways you would pair a pull on the pull side with a push plate on the push side. The Trimco 1070 series is sold as classic push/pull plates at 3-1/2 inches by 15 inches if you want both functions in one plate family.

The Emtek Lafayette is an 8 inch center to center pull. For a longer bar, the Deltana SSP1210 is a 12 inch contemporary pull in a single side configuration, and Deltana offers 24 inch back-to-back sets in both the SSPOBB24 modern offset and the SSPORBB24 round offset. The ABH AB3330 series offset round end pull is available with custom length options.

Offset pulls carry the grip away from the door face. The Ives 8169 is a C style offset solid door pull, 1 inch diameter, with heavy duty mounting, and the ABH AB3310 is an offset flat end door pull for surface mount. The ABH AB3300 is the straight flat end version at 1 inch diameter if the offset is not needed. The Emtek Lafayette 8 inch pull has a 2 inch projection off the door face.

Wrought steel, both substrate and finish material. That's the defining trait of Emtek's Wrought Steel line and why the finishes read as flat black and satin steel rather than plated brass tones.

They are not interchangeable. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height in stainless steel, designed to surround a rim cylinder on a night latch application. The Emtek Lafayette 8 inch wrought steel pull is a plain grip pull with an 8 inch center to center and no cylinder cutout, mounted thru-bolt or concealed surface.

The Emtek Lafayette 8 inch is classified as a door or appliance pull with an 8 inch center to center, so it suits a cabinet or appliance front as well as a door. Among alternatives, the Sure-Loc PL-1KN knurled long door pull and PL-1RD round long door pull are single-sided designs, which is the configuration you want on an appliance or cabinet face where only one side is gripped.