Fluke TL220 TL220 SUREGRIP INDUSTRIAL TEST LEAD

Yes. The Fluke 87V is one of the meters Fluke lists for the TL220 SureGrip industrial test lead set, along with the 83V, 88V/A Kit, 115, 116, 117, 177, 179, 287 and 289, among others. More generally, the set works with any instrument or probe that takes standard 4 mm shrouded banana connectors.

The 725, 724 and 726 multifunction process calibrators are covered, as are the 705, 707, 707Ex, 709, 709H, 712 RTD, 715, 717 and 718 loop calibrators. The connection requirement is the same across all of them: standard 4 mm shrouded banana jacks.

It will, provided the meter's input jacks accept standard 4 mm shrouded banana plugs. That is the only connection condition Fluke states for the TL220. Meters with unshrouded 4 mm jacks, proprietary inputs, or anything other than a banana input are not a match.

Yes on both counts. The 123, 123/S, 124, 124/S and 43B ScopeMeter products are listed, and so are the 365, 373, 902 and 902 FC clamp meters, plus the 233 remote-display meter and the 16, 27 II, 28 II and 28 II Ex meters.

The TL220 is an interchangeable set, not a fixed pair of leads. The probes detach from the lead ends at the 4 mm shrouded banana connection, so the same leads can be fitted with different tips for different electrical tasks instead of buying a separate dedicated set. The SureGrip handles are shaped to stay put in a slippery or gloved hand, which is the point of difference on an industrial bench or in a panel.

Order Fluke TL220. That is both the model name and the manufacturer part number for the SureGrip industrial test lead set, so there is no separate suffix or option to specify.

The TL220 ships as a lead set with test probes together. Because the probes mate to the leads through the standard 4 mm shrouded banana connection, the probes from the set will also fit other leads and instruments using that same connection, so a facility already standardized on shrouded banana test gear can mix and match across its kit.