You may also like
These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed. Buy Online Now.
Features
- Right angle connector on one end and straight connector on the other
- One year warranty
- Reinforced strain relief
- CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
- DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
- 1.5 meter silicone-insulated wire resists heat & cold
Related Products
- AC288 Terminal Block Probe with Retractable Probe Tip
Test Leads
- Fluke TL225
Overview
- Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip, Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip, accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
Compatible Products
- CNX v3000
- Fluke 724
- Fluke 707
- Fluke 124/S
- Fluke 177
- Fluke 707Ex
- Fluke 16
- Fluke 709H
- Fluke 705
- Fluke 179
- Fluke 233
- Fluke 287
- Fluke 789
- Fluke 175
- Fluke 718
- 112/322 KIT
- Fluke 123/S
- Fluke 365
- Fluke 902 FC
- Fluke 902
- Fluke 289
- FLK-3000FC/EDA2
- Fluke 333
- Fluke 335
- Fluke 336
- Fluke 715
- Fluke 787
- Fluke 337
- Fluke 123
- CNX 3000 IND
- Fluke 43B
- Fluke 709
- Fluke 712 RTD
- Fluke 124
- Fluke 334
- Fluke 83V
- Fluke 87V
Manufacturer Resources
Product Specs
Fluke TL224 – Frequently Asked Questions
1) Will the Fluke TL224 test leads plug into my Fluke 87V multimeter?
Yes. The TL224 SureGrip leads terminate in safety shrouded, standard diameter banana plugs, and Fluke lists the 87V among the compatible meters, along with the 83V, 175, 177, 179, 233, 287 and 289. They also fit the 123, 124 and 124/S ScopeMeters, the 700-series loop calibrators (705, 707, 707Ex, 709, 709H, 712 RTD, 715, 718, 724, 787, 789), the 333 through 337 clamp meters, 365, 16, 43B, 902 and 902 FC, CNX v3000, CNX 3000 IND, FLK-3000FC/EDA2 and the 112/322 KIT.
2) What voltage and current rating do the Fluke TL224 leads carry for panel work?
CAT IV 600 V, CAT III 1000 V, 10 A, and UL listed. That CAT IV 600 V rating is what lets you work at the service entrance and utility connection point, not just downstream branch circuits.
3) Can I attach alligator clips or hooks to the TL224 leads, or are the probe tips fixed?
They're built to be reconfigured. The TL224 leads use banana jack termination at the probe end, so you attach clips, hooks or grabbers as the job needs instead of buying a separate lead set for each. That's the main reason to pick these over a fixed-tip lead.
4) Why does one end of the Fluke TL224 have a right angle plug?
One end is a right angle connector and the other is straight. The right angle plug goes into the meter so the leads drop down rather than sticking straight out, which keeps the meter flat against a panel or in a holster and takes strain off the input jacks. Both ends carry reinforced strain relief where the cable meets the connector, which is where test leads usually fail.
5) What else should I order with the TL224 leads to probe terminal blocks?
Fluke pairs the TL224 with the AC288 terminal block probe, which has a retractable probe tip for getting into crowded terminal blocks safely. The leads themselves terminate in banana jacks, so the AC288 and similar accessories screw straight on.
6) What colors come in the Fluke TL224 set and is it a pair?
The TL224 is a pair of DMM test leads, one red and one black, ordered as a single set under part number TL224. No need to order the polarities separately.
7) What is the difference between the Fluke TL224 and the TL225?
Both are SureGrip silicone lead sets, and Fluke groups them together as test lead options. The TL224 is the plain lead set with banana jack termination at the probe end, so you build your configuration from clips, hooks and grabbers. If you want a stretch-out lead instead, the TL225 is the other option in the family.
8) Are the Fluke TL224 leads worth it over generic leads for gloved or wet hands?
That's the point of the SureGrip design. The accessories use rubber over molded surfaces and finger-hugging curves to hold steady in slippery hands, so you're not fighting the probe while you take a reading. Combined with the CAT IV 600 V rating and shrouded banana plugs, it's a set built for live electrical work rather than bench use.
How fast can I get the Fluke TL224 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Fluke TL224 come with a warranty?
Absolutely. The Fluke TL224 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Fluke TL224?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Fluke TL224 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.