Greenlee 50176200 6-32 to 1/4-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$147.36
$97.36
Greenlee 50176200 6-32 to 1/4-20 6-piece Drill Tap Set

Greenlee 50176200 6-32 to 1/4-20 Drill Tap Set, 6-Piece

(No reviews yet) Write a Review

Model: 50176200
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$147.36
$97.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Greenlee 50176200 6-32 to 1/4-20 Drill Tap Set, 6-Piece

The Greenlee 50176200 is a 6-piece Drill Tap Set covering thread sizes from #6-32 through 1/4-20, built from High Speed Steel with a split point and web-thinning design for clean, self-centering starts. Each bit rides on a 1/4 IN quick-change hex shank for fast bit swaps in impact drivers and standard drill chucks. The set handles material thickness up to 10 GA and is rated for use on Mild Steel, Copper, Brass, and Aluminum, making it a versatile combination tool for electricians and installers who need to drill and tap in a single pass without switching between separate bits and taps.

Key Features

  • Wire/Thread Size Range: Covers #6-32 to 1/4-20, spanning the six pieces included in the set.
  • Durable Construction: Made from High Speed Steel for long tool life and repeated drill-and-tap cycles.
  • Split Point Design: Split point with web thinning reduces walking and delivers accurate, self-starting holes without a center punch.
  • Quick-Change Shank: 1/4 IN quick-change hex shank allows fast bit changes and compatibility with hex-drive drivers and drills.
  • Material Versatility: Rated for Mild Steel, Copper, Brass, and Aluminum up to 10 GA material thickness.
  • Complete 6-Piece Set: Six pieces provide a full range of common electrical and enclosure hardware thread sizes in one kit.

Technical Specifications

  • Country Of Origin: CN
  • Material Thickness: Up to 10 GA
  • Material Type: Mild Steel, Copper, Brass, Aluminum
  • Number Of Pieces: 6
  • Packaged Weight: 0.55
  • Point Type: Split Point With Web Thinning
  • Product Height: 0.05 IN
  • Product Length: 12.7 IN
  • Product Material: High Speed Steel
  • Wire Size: #6-32 - 1/4-20
  • Product Width: 9 IN
  • Shank: 1/4 IN Quick Change Hex
  • Volume: 5.715 CI
  • Product Type: Drill/Tap Set

Typical Applications

  • Drilling and Tapping Electrical Enclosures and Panels
  • Fabricating Junction Boxes and Cabinets
  • Grounding Lug and Hardware Installation
  • General Metalworking on Mild Steel, Copper, Brass, and Aluminum
  • Panel Shop and Field Service Work

Why Greenlee?

Greenlee tools are built for the demands of professional electrical and metalworking trades, and the 50176200 Drill Tap Set continues that standard with High Speed Steel construction, a split-point design engineered for accuracy, and a quick-change hex shank built for production speed. The 6-piece set covering #6-32 to 1/4-20 gives electricians and fabricators a dependable, single-source solution for combined drilling and tapping tasks across common enclosure and hardware materials, reducing tool changeovers and keeping panel shop and field service work moving efficiently.

Manufacturer Resources

Spec Sheet

Product Specs

Material Thickness:
Up to 10 GA
Material Type:
Mild Steel, Copper, Brass, Aluminum
Number Of Pieces:
6
Packaged Weight:
0.55
Point Type:
Split Point With Web Thinning
Product Height:
0.05 IN
Product Length:
12.7 IN
Product Material:
High Speed Steel
Wire Size:
#6-32 - 1/4-20
Product Width:
9 IN
Shank:
1/4 IN Quick Change Hex
Volume:
5.715 CI
Product Type:
Drill Tap Kit
Department:
Electrical
Product Subgroup:
Tap Tools & Deburrers
Product Group:
Hand Tools

Greenlee 50176200 – Frequently Asked Questions

1) Can the Greenlee 50176200 drill tap set be used in an impact driver?
Yes. Every piece in the 50176200 set rides on a 1/4 inch quick-change hex shank, so it drops straight into an impact driver or any hex-drive bit holder. It will also chuck up in a standard three-jaw drill chuck if you would rather control speed by hand, which is usually the better choice when tapping brass or aluminum.
2) How thick a panel can I drill and tap with this Greenlee set?
Material thickness up to 10 gauge. That covers typical electrical enclosures, junction boxes, cabinets, and sheet steel panel work. Anything heavier than 10 GA is past what these combination drill/tap bits are rated for, and you should move to a separate drill bit and a hand or machine tap.
3) What thread sizes come in the Greenlee 50176200 6-piece drill tap set?
Six pieces spanning #6-32 up through 1/4-20, which is the range most enclosure hardware, grounding lugs, and panel screws fall into. One bit drills and cuts the thread in the same pass, so you are not swapping between a pilot bit and a tap for each hole.
4) Will these drill taps work on stainless steel or cast iron?
No. The 50176200 set is rated for mild steel, copper, brass, and aluminum only. Stainless and cast iron are outside that list, and running high speed steel combination drill/taps into stainless at impact-driver speed will cook the cutting edges. Use a tap made for stainless on that work.
5) Do I need to center punch before drilling with these bits?
No center punch needed. The bits use a split point with web thinning, which self-centers and keeps the bit from walking across a slick enclosure wall. That matters most when you are drilling overhead or on a vertical panel face and cannot hold a punch steady.
6) Is this a tap set or a drill set?
Both in one tool. Each of the six pieces is a combination drill/tap: the tip drills the hole and the threaded section behind it cuts the thread as you keep feeding, so a single pass gives you a finished tapped hole. That is the trade-off versus separate bits and taps, you give up some control over hole quality in exchange for far fewer tool changes on repetitive enclosure work.
7) What is the Greenlee 50176200 made of, and will it hold up to repeat production use?
High speed steel throughout. HSS is the standard for repeated drill-and-tap cycles in mild steel and non-ferrous metals, holding an edge well as long as you keep the speed down and clear chips. Panel shops running the same hole pattern all day get the most out of these.
8) What is the exact part number to order this Greenlee 6-piece drill tap set?
Greenlee part number 50176200. It is sold as a single 6-piece set covering #6-32 to 1/4-20, not as individual sizes.
9) What are the packaged dimensions of this Greenlee drill tap kit for toolbox storage?
The kit measures 12.7 inches long by 9 inches wide by 0.05 inches high, with a packaged weight of 0.55. It is a flat card-style pack, so it lays in a drawer or van bin rather than taking up block space.
How fast can I get the Greenlee 50176200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Greenlee 50176200 come with a warranty?
Absolutely. The Greenlee 50176200 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Greenlee 50176200?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Greenlee 50176200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!