Greenlee 52085692 3/4" Hydraul...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$125.09
$97.66
Greenlee 52085692 3/4" Hydraulic Draw Stud

Greenlee 52085692 3/4" Hydraulic Draw Stud, Knockout Punch Driver Replacement

(No reviews yet) Write a Review

Model: 52085692
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$125.09
$97.66
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Greenlee 52085692 3/4" Hydraulic Draw Stud, Knockout Punch Driver Replacement

The Greenlee 52085692 is a 3/4" Hydraulic Draw Stud engineered as a direct replacement for the Greenlee 2113B, giving electricians and panel fabricators a reliable way to keep their hydraulic knockout punch drivers in service without downtime. This draw stud threads into a Greenlee hydraulic knockout driver and works in tandem with the corresponding punch and die set to pull clean, properly sized knockouts through enclosure walls, panelboards, and electrical boxes. Built to Greenlee's standard fit and function specifications, the 52085692 draw stud is sized for the 3/4" hydraulic punch driver line, making it a straightforward maintenance-and-repair component for shops that already run Greenlee hydraulic punch equipment. Because it is a like-for-like replacement for the 2113B, technicians can swap it into existing setups without changing procedure, torque sequence, or die compatibility, keeping crews productive on the job site.

Key Features

  • Trade Size: 3/4" draw stud sized for use with compatible Greenlee hydraulic knockout punch drivers.
  • Direct Replacement: Cross-references to the Greenlee 2113B, simplifying repair and restock for existing hydraulic punch tooling.
  • Dimensions: Approximately 9.1 IN in length, 2.9 IN in width, and 1.01 IN in height, sized to fit standard Greenlee hydraulic driver assemblies.
  • Packaged Weight: 0.67 lb, a lightweight replacement part that's easy to stock and ship for field service.
  • Maintenance-Ready Design: Purpose-built to keep hydraulic knockout punch and die sets operating without switching to a different tool platform.
  • Country of Origin: Manufactured in the US for consistent quality control.

Technical Specifications

  • Country Of Origin: US
  • Volume: 26.6539 CI
  • Packaged Weight: 0.67 lb
  • Product Height: 1.01 IN
  • Product Length: 9.1 IN
  • Product Width: 2.9 IN
  • Product Subgroup: Knockout Punches

Typical Applications

  • Replacement Part for Greenlee Hydraulic Knockout Punch Drivers
  • Panelboard and Enclosure Knockout Punching
  • Electrical Box and Cabinet Fabrication
  • Field Maintenance and Repair of Hydraulic Punch Tooling
  • Commercial and Industrial Electrical Installations

Why Greenlee?

Greenlee has long been a trusted name in professional electrical tooling, and the 52085692 draw stud continues that standard by giving contractors an exact-fit replacement part for their existing hydraulic knockout punch drivers. Sourced from the United States, this component is designed to restore full function to Greenlee hydraulic punch systems without introducing compatibility questions, helping crews keep their knockout punching operations moving on schedule. Stocking genuine Greenlee replacement parts like the 52085692 draw stud means technicians spend less time troubleshooting mismatched hardware and more time completing the knockout work that keeps installation and panel-fabrication projects on schedule.

Manufacturer Resources

Spec Sheet

Product Specs

Capacity:
See punch and knockout driver specifications.
Country Of Origin:
United States
Packaged Weight:
0.67
Product Height:
1.01 IN
Product Length:
9.1 IN
Product Material:
See punch and knockout driver specifications.
Product Size:
3/4"
Product Type:
Draw Stud
Product Width:
2.9 IN
Thickness:
See punch specifications.
Volume:
26.653899999999997 CI
Department:
Electrical
Product Subgroup:
Knockout Punches
Product Group:
Electrical Installation Tools

Greenlee 52085692 – Frequently Asked Questions

1) What size Greenlee hydraulic punch driver is the 52085692 draw stud for?
It is the 3/4 inch draw stud, sized for Greenlee's 3/4 inch hydraulic knockout punch driver line. If your driver takes a different stud size, this one will not thread in correctly, so match the stud size to the driver and the punch and die set you are running.
2) Does buying the 52085692 draw stud include a punch and die?
No. This is the draw stud only. You still need the correct punch and die set for the conduit size you are knocking out, plus the hydraulic driver itself. The stud is stocked as a maintenance and repair part for crews already running Greenlee hydraulic punch equipment.
3) What exactly does a draw stud do in a hydraulic knockout punch setup?
The draw stud is the threaded rod that carries the pulling load. It threads into the hydraulic knockout driver, passes through the pilot hole in the enclosure wall, and the punch and die ride on it while the ram pulls the punch through the metal. It is a wear item, which is why it is sold as a standalone replacement rather than only in a kit.
4) How thick a panel or enclosure wall can I punch with this draw stud?
Material thickness and hole capacity are set by the punch and die and the hydraulic driver you pair it with, not by the stud. Greenlee rates capacity and thickness against the punch and knockout driver specifications, so check the rating on the punch set and driver you are using for mild steel, stainless, or heavier gauge work.
5) How long is the Greenlee 52085692 draw stud?
Greenlee lists the part at 9.1 inches long, 2.9 inches wide and 1.01 inches high. The length matters when you are punching through a deep enclosure flange or stacking a spacer, since the stud has to reach through the material and still engage the driver.
6) Is the Greenlee 52085692 a genuine Greenlee part and where is it made?
It is a genuine Greenlee component, manufactured in the US. For a shop standardizing on Greenlee hydraulic punch tooling, that keeps thread fit and die compatibility consistent across the kit instead of mixing in an aftermarket stud.
7) Is this draw stud light enough to carry in a service van kit?
Packaged weight is 0.67 lb, so it is easy to keep a spare in the truck or on the shelf. Draw studs are the component most likely to stretch or gall on a hard punch, and electricians doing panel and cabinet fabrication often carry a backup to avoid losing a day.
How fast can I get the Greenlee 52085692 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Greenlee 52085692 come with a warranty?
Absolutely. The Greenlee 52085692 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Greenlee 52085692?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Greenlee 52085692 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!