Klein Tools S-6H Grip-It® Stra...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$83.89
$25.67
Klein Tools S-6H Grip-It® Strap Wrench, 1-1/2 to 5-Inch, 6-Inch L

Klein Tools S-6H Grip-It® Strap Wrench, 1-1/2 to 5-Inch, 6-Inch L

(No reviews yet) Write a Review

Model: S-6H
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$83.89
$25.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Grip-It® Strap Wrench, 1-1/2 to 5-Inch, 6-Inch L

  • Warnings

    • Do NOT extend handle length.
    • Always wear approved eye protection.
    • Do NOT push or hammer wrench.

  • Features

    • Under normal conditions, will not scratch, damage or deform polished pipe and fittings, plastic pipe and fittings, oil and water filters, glass pipe, PVC conduit, and polished shafts
    • Completely adjustable strap wrench
    • Cam-action design permits uniform, high-torque application
    • Also works on alternator belts, flywheels, and propeller assemblies
    • Made in USA
    • Urethane-covered, high-strength belting attached to lightweight, I-beam handle
    • Works in the tightest quarters


S-6H - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Diameter Capacity O D:
1.5" to 5" (3.8 to 12.7 cm)
Handle Length:
6" (15.2 cm)
Item Depth:
1.0000 in
Item Height:
1.0000 in
Item Weight:
0.2000 lbs
Item Width:
1.0000 in
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Hammers & Wrenches
Product Weight:
3.2 oz (91 g)
Product Type:
Wrench
Product Height:
1 in
Country Of Origin:
United States
Product Width:
1 in
Product Depth:
1 in

Klein Tools S-6H – Frequently Asked Questions

1) What pipe sizes will the Klein S-6H strap wrench grip?
The Klein Tools S-6H Grip-It strap wrench handles outside diameters from 1-1/2 inches up to 5 inches (3.8 to 12.7 cm). Because the strap is fully adjustable, anything inside that OD range gets wrapped and gripped, no fixed jaw setting to match. Larger conduit or pipe above 5 inches OD needs a longer strap wrench.
2) Will a strap wrench mar polished chrome or PVC, or should I use pipe wrench on those?
That is the reason to reach for the S-6H instead of a toothed pipe wrench. The urethane-covered belting grips without biting, so under normal conditions it will not scratch, damage or deform polished pipe and fittings, plastic pipe and fittings, oil and water filters, glass pipe, PVC conduit, or polished shafts. A serrated pipe wrench will chew all of those up. Use the pipe wrench on black iron and galvanized where marks don't matter.
3) Is a 6-inch handle long enough to break loose a tight fitting?
The S-6H has a 6-inch (15.2 cm) I-beam handle, which is built for close quarters, inside panels, under sinks, between studs, where a long wrench won't swing. The cam-action design multiplies what you put in by tightening the strap uniformly as you pull. Klein is explicit that you must not extend the handle with a cheater bar, and not to push or hammer the wrench. If a joint needs more leverage than a 6-inch handle gives, step up to a longer strap wrench rather than fighting this one.
4) Can an electrician use this on PVC conduit without cracking it?
Yes, PVC conduit is one of the materials Klein calls out for the Grip-It strap. The belting spreads load around the pipe instead of concentrating it on teeth, so you get turning force without the crush point that cracks thin-wall conduit. Klein catalogs the S-6H as an electrical tool.
5) What is the exact part number to order the Klein 6-inch Grip-It strap wrench?
Order Klein Tools model S-6H. The number reads as the Grip-It strap wrench with the 6-inch handle and 1-1/2 to 5 inch OD capacity. It is made in the USA.
6) Besides plumbing, what else is the Grip-It strap wrench used for?
Beyond pipe and fittings, it is rated for oil and water filters, alternator belts, flywheels, and propeller assemblies. That makes it a fleet and facilities maintenance tool as much as a trade tool, filter changes on equipment, holding a pulley while you break a nut, anything round you need to turn without marking.
7) How heavy is the Klein S-6H strap wrench for a service truck or tool pouch?
It weighs 3.2 oz (91 g). The handle is a lightweight I-beam section rather than solid bar, so it rides in a pouch without pulling on your belt. Easy one to keep a couple of in the van.
How fast can I get the Klein Tools S-6H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools S-6H come with a warranty?
Absolutely. The Klein Tools S-6H is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools S-6H?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools S-6H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!