Hager 15S Light Duty Flush Cup...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$69.58
$52.91
Hager 15S Light Duty Flush Cup Pull HAG-15S

Hager 15S Light Duty Flush Cup Pull for Sliding Doors

(No reviews yet) Write a Review

Model: 15S32D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$69.58
$52.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 15S Light Duty Flush Cup Pull for Sliding Doors

Professional Sliding Door Hardware Solution

The Hager 15S Light Duty Flush Cup Pull provides reliable operation for sliding door applications with a minimal 1/8" projection and 3/4" cup clearance. This commercial-grade pull features durable construction in aluminum, brass, bronze, or stainless steel materials and meets ANSI A156.6 standards for J403 pulls. The recessed design includes two #6 x 5/8" FPHWS fasteners positioned inside the cup for a clean, professional appearance.

Professional Features & Benefits

  • Low-Profile Design: 1/8" projection minimizes interference while providing secure grip for sliding door operation.
  • Recessed Cup Configuration: 3/4" cup clearance accommodates finger access while maintaining clean door surface aesthetics.
  • Concealed Fastener System: Two #6 x 5/8" FPHWS fasteners mount inside the recessed cup for tamper resistance and professional appearance.
  • Multi-Material Construction: Available in aluminum, brass, bronze, and stainless steel to match various architectural finishes and durability requirements.
  • ANSI Compliance: Meets ANSI A156.6 standards for J403 pulls ensuring consistent performance and code compliance.
  • Commercial-Grade Durability: Light duty rating suitable for frequent use in commercial sliding door applications.
  • Versatile Finish Options: Available in US3, US4, US10, US10B, DBZ, US26, US26D, US28, and US32D finishes for design flexibility.

Technical Specifications

  • ANSI/BHMA: Meets ANSI A156.6 for J403 Pulls
  • Certifications: Meets ANSI A156.6 for J403 Pulls;
  • Commercial/Residential: Commercial
  • Cup Clearance: 3/4" (19 mm).
  • Fasteners: two (2) #6 x 5/8" FPHWS
  • Finishes: US3, US4, US10, US10B, DBZ, US26, US26D, US28, US32D
  • Material: Aluminum, Brass, Bronze, Stainless Steel
  • Note: Fasteners inside recessed cup;
  • Projection: 1/8" (3 mm).
  • Subcategory: Flush Pull

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness and material compatibility for this flush cup pull.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door surface for proper cup alignment.
  3. Prepare door by drilling required holes and routing the recessed cup area as specified in manufacturer instructions.
  4. Install the flush cup pull and secure with the provided #6 x 5/8" FPHWS fasteners positioned inside the recessed cup per manufacturer torque specifications.
  5. Adjust cup positioning for proper alignment and verify smooth operation with sliding door hardware system.
  6. Test pull operation to verify secure grip and proper function throughout the sliding door range of motion. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Conference Rooms and Meeting Spaces

Why Choose Hager Quality?

Hager sliding door pulls deliver professional-grade reliability with multi-material construction options including aluminum, brass, bronze, and stainless steel for demanding commercial applications. ANSI A156.6 compliance ensures consistent performance and code compliance for professional installations. Engineered for commercial sliding door systems where dependable operation and clean aesthetics are essential.

Commercial-grade sliding door hardware with jump-proof box track and self-aligning wheel systems. Meets ANSI requirements.

Product Specs

Subcategory:
Flush Pull
Fasteners:
Two (2) 6 x 5/8" FPHWS
ANSI/BHMA:
Meets ANSI A156.6 for J403 Pulls
Product Group:
Sliding Door and Barn Door Hardware
Product Subgroup:
Sliding Door Pulls
Product Type:
Sliding Door Pulls
Commercial/Residential:
Commercial
Product Model:
15S
Product Projection:
1/8"
Product Category:
Sliding Door and Barn Door Hardware
Product Substrate:
Aluminum, Brass, Bronze, Stainless Steel
Department:
Door Hardware

Hager 15S32D – Frequently Asked Questions

1) How far does the Hager 15S flush cup pull stick out from the door face?
Projection on the 15S is 1/8 inch, so it clears a pocket door jamb and passes a bypass door without catching the adjacent panel. The finger recess itself gives 3/4 inch of cup clearance, which is what you actually grip. That low profile is the whole point of a flush cup pull: anything with a bar or knob on the face will not pass into a pocket.
2) Should I use a flush cup pull or a bar-and-recess combo pull on a sliding door?
A flush cup like the Hager 15S is what you want when the door has to disappear into a pocket or slide past another panel, because nothing projects more than 1/8 inch. If the door is a surface-mounted barn or bypass slab with clearance in front of it, a combo set gives you far more leverage on a heavy panel: the Orca Hardware AH Series offers a round bar or square bar paired with a recessed pull. Combos like those are cut for 1-3/8 to 1-3/4 inch doors. Heavy slab, open face, use a bar. Pocket door, use the cup.
3) Does the Hager 15S sliding door pull lock or have a privacy function?
No. The 15S is a pull only, with no latching or privacy hardware in it. For a bathroom or bedroom pocket door that has to lock, look at the Ives 991A aluminum sliding door pull or the Schlage SC991 solid brass version, both of which carry a privacy/bed/bath function. If the opening only needs to be moved, not secured, the cup pull is the simpler prep.
4) Does the Hager 15S flush pull meet ANSI/BHMA requirements for a commercial spec?
It meets ANSI A156.6 for J403 pulls, which is the architectural door trim standard, and it is classified as commercial rather than residential. If your drawing calls out A156.6 door trim for a pocket or bypass door, the 15S answers that line. J403 is the flush cup pull type designation within that standard.
5) Can a Hager 15S cup pull be surface mounted, or does the door have to be routed?
It has to be routed. With only 1/8 inch of projection and a 3/4 inch cup, the body sits down into the door, and the two #6 x 5/8 inch screws fasten from inside that recess. There is no surface-applied version of this pull. If you cannot rout the slab, a surface bar such as the Orca AH Series combo is the direction to go instead.
6) What is the closest equivalent to the Hager 15S flush cup pull from another manufacturer?
The Trimco 7059 Series fOCAL flush cup pulls are the closest like-for-like alternative to the Hager 15S. Both are flush cup pulls that recess into the door face for sliding and pocket door use, so the door prep concept is the same routed cup rather than a surface-mounted bar. The Hager 15S carries a 1/8 inch projection and is a commercial-rated pull meeting ANSI A156.6 for J403 pulls, in aluminum, brass, bronze, or stainless steel. If the opening needs a smaller cup footprint, the Trimco 7061 Series fOCAL small flush cup pulls measure 2-3/4 inches by 2-1/16 inches.
7) I need a sliding door pull that locks for a bathroom - will the Hager 15S work?
No. The Hager 15S is a plain flush cup pull with no locking or latching mechanism; it gives you a recessed finger grip and nothing else. For a bathroom or bedroom slider that has to secure, use a pull with a privacy function instead: the Ives 991A aluminum sliding door pull carries a Privacy/Bed/Bath function, and the Schlage SC991 solid brass sliding door pull carries the same Privacy/Bed/Bath function in brass with decorative coined edges.
8) What screws come with the Hager 15S cup pull and can they be seen once installed?
Two #6 x 5/8 inch flat Phillips head wood screws ship with the pull, and they land inside the recessed cup rather than on the door face. That keeps the face clean and puts the heads where they are awkward to get at, which matters in a school or a healthcare corridor. Because they are 5/8 inch wood screws, the pull wants a solid substrate behind the routed pocket, not a hollow skin.
9) What finishes does the Hager 15S cup pull come in, and can I match the rest of my door hardware?
Six finishes are orderable: 605 bright brass, 613 satin bronze oil-rubbed, 625 bright chrome, 626 satin chrome, 628 satin aluminum, and 630 satin stainless steel. That covers the finishes most commercial openings are already standardized on, so a pocket door pull can match the levers and hinges on the swinging doors around it. Pick 626 or 630 for the usual institutional satin look, 613 for a dark bronze package.
10) Which material should I pick for a Hager 15S pull in a high-traffic or wet area?
The 15S is made in aluminum, brass, bronze, and stainless steel, and the material follows the finish you order. For a locker room, kitchen, or clinical corridor, the 630 satin stainless option is the one that takes cleaning chemicals and constant handling best. Aluminum in 628 is the lighter-duty office choice, and brass or bronze suits a finish-driven package where 605 or 613 has to match existing trim.
11) Do I need to order two Hager 15S pulls for one pocket door?
Usually yes. Each 15S is a single cup, so a pocket door that gets used from both sides needs one on each face, and a pair of doors meeting in the middle needs one per leaf per side. Finish is the only option you choose, so ordering the quantity you need in a single finish code is the whole order.
12) Which flush pull should I standardize on across a commercial facility, the Hager 15S or the Schlage SC991?
They are built for different openings. The Hager 15S is designated for commercial use and meets ANSI A156.6 for J403 pulls, with material options in aluminum, brass, bronze, and stainless steel and finishes covering 605 bright brass, 613 satin bronze oil-rubbed, 625 bright chrome, 626 satin chrome, 628 satin aluminum, and 630 satin stainless steel, which is what lets you match one pull across mixed hardware schedules. The Schlage SC991 is a residential-line solid brass sliding door pull with a Privacy/Bed/Bath function, so it belongs on openings that need to secure rather than on a facility-wide plain pull standard.
13) The existing cutout in my door is small - is there a flush pull that fits a tighter prep than the Hager 15S?
The Trimco 7061 Series fOCAL small flush cup pull is the compact option, with a face measuring 2-3/4 inches by 2-1/16 inches. The Trimco 7059 Series fOCAL flush cup pull is the standard-size version in the same fOCAL family. The Hager 15S recesses into the door with a 3/4 inch cup clearance and 1/8 inch projection and is fastened by two #6 x 5/8 inch FPHWS screws seated inside the cup, so confirm your existing routed pocket depth before matching any of them to an old cutout.
14) Is the Ives 991A a direct replacement for a Hager 15S flush pull?
Not a direct one. The Ives 991A is an aluminum sliding door pull with a Privacy/Bed/Bath function and decorative coined edges, so it carries a locking mechanism and a decorative edge treatment the Hager 15S does not. The 15S is a plain flush cup pull with a 1/8 inch projection and two #6 x 5/8 inch FPHWS fasteners concealed inside the cup for a clean face. Swapping one for the other changes both the door prep and whether the opening can be secured, so treat them as different functions rather than interchangeable parts.
15) What is the difference between the Orca AH round bar combo and the AH square bar combo for a sliding door?
The difference is the profile of the projecting bar. The Orca Hardware AH Series round bar and recessed pull combo uses a round bar, and the AH Series square bar and recessed pull combo uses a square bar; both include a recessed pull alongside the bar and both fit doors 1-3/8 inch to 1-3/4 inch thick. Pick on the door style and the rest of the hardware on the opening. If the door needs to sit fully flush with no projecting bar at all, the Hager 15S flush cup pull projects 1/8 inch instead.
How fast can I get the Hager 15S32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 15S32D come with a warranty?
Absolutely. The Hager 15S32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 15S32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 15S32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!