Hager 269F Heavy Duty Floor St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$33.18
Hager 269F Heavy Duty Floor Stop, 5/8" Steel Pin with Rubber Bumper

Hager 269F Heavy Duty Floor Stop with 5/8" Steel Pin and Rubber Bumper

(No reviews yet) Write a Review

Model: 269F

In Stock (leaves warehouse same day if ordered before 3pm ET)

$33.18
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 269F Heavy Duty Floor Stop with 5/8" Steel Pin and Rubber Bumper

Professional Heavy-Duty Door Stop Solution for High-Security Applications

The Hager 269F Heavy Duty Floor Stop delivers exceptional durability with a 5/8" steel pin and fire-resistant black rubber bumper measuring 2" in diameter and 1-1/2" in height. This commercial-grade floor stop exceeds 300 lb. impact test criteria and features a 5/8" - 11 x 2-1/2" steel bolt for secure concrete installation. Specifically designed for high vandalism areas including correctional facilities where exposed screws must be eliminated through grouted concrete mounting.

Professional Features & Benefits

  • Heavy-Duty Impact Rating: Exceeds 300 lb. impact test criteria (Report #91-04-016460) for superior protection in demanding environments.
  • Vandal-Resistant Design: Grouted concrete installation eliminates exposed screws, making it ideal for prisons and high-security applications.
  • Fire-Resistant Construction: Black rubber bumper material meets fire-resistance requirements for commercial safety compliance.
  • Robust Steel Components: 5/8" steel pin and 5/8" - 11 x 2-1/2" steel bolt provide maximum holding strength and durability.
  • Optimal Bumper Dimensions: 2" diameter and 1-1/2" height provide effective door protection while maintaining low profile.
  • High-Security Applications: Specifically engineered for correctional facilities and areas requiring tamper-resistant hardware.

Technical Specifications

  • Box Quantity: 5
  • Bumper Diameter: 2" (51 mm)
  • Bumper Height: 1-1/2" (38 mm)
  • Case Quantity: 50
  • Certifications: Exceeds the criteria set forth for a 300 lb. impact test (Report #91-04-016460)
  • Commercial/Residential: Commercial
  • Material: Black rubber (fire-resistant)
  • Notes: Designed for high vandalism areas
  • Steel Bolt: 5/8" - 11 x 2-1/2" thread
  • Subcategory: Floor Stops & Holders

Installation & Operation

  1. Mark the desired floor stop location ensuring adequate clearance for door swing and proper door protection positioning.
  2. Drill anchor hole in concrete floor to accommodate the 5/8" - 11 x 2-1/2" steel bolt per manufacturer specifications.
  3. Insert steel bolt through floor stop base and secure into prepared concrete anchor point.
  4. Apply grout around the base to eliminate exposed fasteners and create tamper-resistant installation as required for high-security applications.
  5. Allow grout to cure completely before subjecting the floor stop to operational loads.
  6. Test door operation to verify proper stop function and adjust positioning if necessary. Refer to manufacturer documentation for complete installation specifications.

Professional Applications

  • Correctional Facilities and Detention Centers
  • High-Security Government Buildings
  • Mental Health Facilities
  • Juvenile Detention Centers
  • Maximum Security Commercial Buildings
  • Vandal-Prone Public Facilities
  • Industrial Security Applications

Why Choose Hager Quality?

Hager 269F Heavy Duty Floor Stops deliver professional-grade reliability with fire-resistant rubber construction and steel components that exceed 300 lb. impact test criteria. Specifically engineered for high-vandalism environments including correctional facilities, this floor stop provides tamper-resistant performance through grouted concrete installation. Built for demanding commercial applications where security and durability are paramount.

Door stop and holder designed to protect walls and doors while controlling door position in commercial and institutional openings.

Manufacturer Resources

Product Template

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Commercial/Residential:
Commercial
Product Type:
Door Stops - Floor
Subcategory:
Floor Stops & Holders
Product Model:
269F
Product Diameter:
2"
Product Height:
1-1/2"
Product Substrate:
Black rubber (fire-resistant)
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Hager 269F – Frequently Asked Questions

1) Will the Hager 269F floor stop work on a wood or tile floor, or does it need concrete?
Concrete. The 269F anchors with a 5/8 inch - 11 x 2-1/2 inch steel bolt set into the floor, and the tamper-resistant install depends on grouting around the base so no screws are left exposed. On wood, tile over subfloor, or anywhere you can't drill and grout an anchor, this is the wrong stop. For those openings look at a surface-screwed dome stop like the Ives FS13 or the Orca 23LP low rise dome stop instead.
2) How high does the Hager 269F floor stop sit off the floor, and will it catch my door?
The bumper is 1-1/2 inches high and 2 inches in diameter, and the steel pin carrying it is 5/8 inch. Measure your door bottom clearance: the door leaf has to pass over 1-1/2 inches of stop, so with a tall threshold or an undercut door on a carpet transition, check that the stop lands where the door face meets it rather than under the leaf. The 2 inch bumper face gives you a wide strike area, so exact left-right placement is forgiving.
3) Is the Hager 269F a door stop only, or will it hold the door open?
Stop only. The 269F takes the impact and stops the swing, it has no catch or holder arm to keep the leaf open. If you need the door to stay put once it is open, that's a different part: a holder like the Orca 22HD goose neck, the Ives FS40/FS41/FS42/FS43 automatic floor stop and holder, or the SOSS MDH magnetic door holder and stop.
4) What floor stop should I use in a correctional facility or a detention cell door?
A pin-and-grout stop is what those specs call for, and the Hager 269F is built to it: 5/8 inch steel pin, a 5/8 inch - 11 x 2-1/2 inch bolt into concrete, and grout packed around the base so there is no screw head to attack. It exceeds the 300 lb impact test criteria (Report #91-04-016460). Ives also makes a security floor stop, the FS18S/FS18L, if you need a second source on the spec.
5) What is the closest equivalent to the Hager 269F for a floor stop that has to survive a detention or high-vandalism opening?
The Ives FS18S/FS18L security floor stop is the nearest peer. Both are heavy duty floor stops built for openings where the stop itself gets attacked: the Hager 269F uses a 5/8 inch steel pin with a 5/8-11 x 2-1/2 inch steel bolt set into concrete and grouted over so no fasteners are exposed, and the Ives FS18S/FS18L is catalogued as a security floor stop at a heavy duty level. If the specification calls out a security stop by brand, those are the two to price against each other.
6) Is there a simpler floor stop than the Hager 269F for an ordinary commercial office door?
Yes. The 269F is built for correctional and high-vandalism openings and is installed by drilling concrete, setting a 5/8-11 x 2-1/2 inch bolt, and grouting the base - that is more work than a standard office door needs. For a routine opening, the Ives FS13 heavy-duty brass floor dome stop takes a replaceable rubber bumper, the Ives FS17 is a heavy-duty brass floor dome stop with a rubber bumper, and the Orca Hardware 23LP Series is a low rise dome floor stop with a gray tip. All three are surface dome stops rather than grouted-in pins.
7) Can a Deltana or Emtek floor bumper be substituted for a Hager 269F?
They are not equivalents, even though the catalog names look close. The Deltana UFB4505 is a 1-1/2 inch round universal floor bumper in solid brass, the UFBS138 is a 1-3/8 inch square version, the UFBP4505 is a 1-5/8 inch pattern cap version, and the UFBD3505 is a 3-1/2 inch decorative round bumper; Emtek's 2254 floor door bumper is 1-3/8 inch by 1-1/4 inch and the 2257 is a 1-1/2 inch cylindrical floor bumper. Those are low-profile decorative bumpers in solid brass or a finished cap. The Hager 269F is a commercial part with a fire-resistant black rubber bumper on a 5/8 inch steel pin, rated past a 300 lb. impact test under report #91-04-016460, and grouted into concrete so no screws are reachable. Specify the brass bumpers for finished residential and light commercial interiors, and the 269F where the door gets thrown.
8) Can I swap a Hager 269F in where a brass dome stop is already screwed to the floor?
Not as a drop-in. A dome stop mounts on surface screws into an existing small hole pattern; the 269F needs a 5/8 inch - 11 x 2-1/2 inch bolt anchored into the concrete and grout around the base, so you are drilling a new anchor and patching the old holes. If you want to reuse the same footprint and keep it simple, stay with a surface-mounted dome stop such as the Ives FS17 or Ives FS13. Go to the 269F when the old stop keeps getting kicked loose or removed.
9) What is the bumper on the Hager 269F made of, and can I get it in a finish to match my other hardware?
Black rubber, and it is a fire-resistant compound. The 269F is a functional commercial stop, not a decorative one, so there is no brass or plated finish option, it ships as the one model. If the stop is in a lobby or a finished space where it has to match the rest of the trim, a solid brass bumper like the Deltana UFB4505 (1-1/2 inch round) or the decorative Deltana UFBD3505 (3-1/2 inch) is the look you want.
10) Does the Hager 269F floor stop come with the anchor bolt, or do I order that separately?
The 5/8 inch - 11 x 2-1/2 inch steel bolt is part of the 269F. What you supply on site is the grout for packing the base and whatever concrete anchor or sleeve your install detail calls for in the drilled hole. Order it by the box of 5 or the case of 50.
11) Is the Hager 269F rated for commercial traffic or is it a residential door stop?
Commercial, and specifically for abuse. The 269F exceeds the 300 lb impact test criteria (Report #91-04-016460), which is the number that separates it from a residential bumper that will shear off the first time a cart drives a door into it. For a house or a light interior door, a small residential bumper like the Emtek 2254 (1-3/8 by 1-1/4 inch) or Emtek 2257 cylindrical is the right scale.
12) What should I use instead of a Hager 269F when the stop cannot be anchored into the floor slab?
The 269F install depends on a concrete anchor - you drill the slab, set the 5/8-11 x 2-1/2 inch steel bolt, and grout the base. Where you cannot drill the floor, go to a door-mounted or wall-side alternative: the Orca Hardware 22HD Series goose neck stop mounts to a 1-3/8 inch or 1-3/4 inch door, the Emtek 2253 goose style door stop and Emtek 2251 half dome door stop are the same style family, and the Delaney gooseneck floor door stop and Delaney dome door stop round out the choices. The goose neck styles reach out from the door face rather than standing up out of the slab.
13) Which floor stop has a bumper that can be replaced without pulling the whole stop?
The Ives FS13 heavy-duty brass floor dome stop is specified with a replaceable rubber bumper, which is the one to standardize on if the maintenance plan is to swap worn bumpers in place. The Hager 269F takes a different approach to service life: its 2 inch diameter, 1-1/2 inch high fire-resistant black rubber bumper sits on a 5/8 inch steel pin grouted into the slab, an assembly built to exceed a 300 lb. impact test rather than to be opened up on a maintenance round.
14) For a facility standardizing floor stops across both public corridors and secure areas, how do the heavy duty options divide up?
Three groups. For secure and high-vandalism openings, the Hager 269F is grouted into concrete with a 5/8 inch steel pin so nothing is exposed to tamper with, and the Ives FS18S/FS18L is the peer security floor stop. For general heavy traffic where the door only needs stopping, the Ives FS13 and Ives FS17 heavy-duty brass floor dome stops and the Orca 23LP Series low rise dome stop cover it. Where doors need to stand open, the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder offers adjustable door-to-floor clearance and the SOSS MDH is a heavy duty magnetic holder and stop. Splitting the spec that way lets one facility carry three part numbers instead of one compromise part.
15) How many Hager 269F floor stops come in a box?
Five per box, 50 per case. Worth knowing if you are standardizing a wing or a whole facility on one stop, since the 269F is a single-model item with no finish or size options to sort through when you reorder.
16) I need a larger footprint floor bumper than the Hager 269F for a wide door. What are the options?
The 269F bumper is 2 inch in diameter and 1-1/2 inch high. Going larger in diameter, the Deltana UFBD3505 is a 3-1/2 inch round universal floor bumper in solid brass with a decorative cap, and the SOSS MDH covers 3-5/16 inch by 1-3/4 inch as a magnetic holder and stop. Going smaller, the Deltana UFBS138 square bumper is 1-3/8 inch, the Emtek 2254 is 1-3/8 inch by 1-1/4 inch, and the Deltana UFB4505 and Emtek 2257 are both 1-1/2 inch. Measure the strike point on the door bottom rail before committing to a diameter.
How fast can I get the Hager 269F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 269F come with a warranty?
Absolutely. The Hager 269F is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 269F?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 269F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!