Hager 27N Security Flush Cup P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$307.95
$220.57
Hager Hager 27N Security Flush Cup Pull HAG-27N-US32D

Hager 27N Security Flush Cup Pull with Torx Fasteners - Stainless Steel

(No reviews yet) Write a Review

Model: 27N-US32D

In Stock (leaves warehouse same day if ordered before 3pm ET)

$307.95
$220.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 27N Security Flush Cup Pull with Torx Fasteners - Stainless Steel

Professional Security Flush Pull for Sliding Door Applications

The Hager 27N Security Flush Cup Pull delivers professional-grade performance for commercial sliding door applications. This ADA compliant flush pull features a 5" x 5" face with 3" x 3-1/2" opening and 7/8" cup clearance for comfortable operation. Constructed from durable stainless steel with security torx fasteners, this pull meets ANSI A156.5 standards for J403 pulls and provides tamper-resistant installation with its specialized security hardware.

Professional Features & Benefits

  • ADA Compliant Design: 7/8" cup clearance and ergonomic dimensions ensure accessibility compliance for commercial installations.
  • Security Torx Fasteners: Four 10-24 FPHMS security torx sex nuts and bolts provide tamper-resistant mounting for enhanced security.
  • Stainless Steel Construction: Durable stainless steel material with US32D finish provides corrosion resistance and long-lasting performance.
  • Precise Dimensions: 5" x 5" face with 3" x 3-1/2" opening and 3/8" projection designed for optimal sliding door operation.
  • ANSI Compliance: Meets ANSI A156.5 standards for J403 pulls ensuring professional-grade quality and performance.
  • Flush Mount Design: Low 3/8" projection minimizes snag hazards while providing secure grip for sliding door operation.

Technical Specifications

  • ANSI/BHMA: ADA compliant Meets ANSI A156.5 for J403 pulls
  • Code Compliance: Meets ANSI A156.5 for J403 pulls, ADA Compliant;
  • Commercial/Residential: Commercial
  • Cup Clearance: 7/8" (22 mm);
  • Fasteners: Four 10-24 FPHMS (security torx) sex nuts and bolts
  • Finishes: US32D;
  • Material: Stainless Steel;
  • Notes: Face: 5" x 5" (127 mm x 127 mm);
  • Projection: 3/8" (10 mm).
  • Subcategory: Flush Pull

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness and material compatibility for this flush pull application.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door surface, ensuring proper alignment with door edge.
  3. Prepare door by drilling required holes for the four 10-24 fasteners according to manufacturer specifications.
  4. Install the flush pull using the provided security torx sex nuts and bolts, ensuring proper torque specifications are met.
  5. Verify flush mounting and proper clearance for smooth sliding door operation without interference.
  6. Test pull operation to ensure secure grip and smooth function. Refer to manufacturer documentation for complete installation details and ADA compliance verification.

Professional Applications

  • Commercial Office Buildings
  • Healthcare Facilities
  • Educational Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager flush pull hardware delivers professional-grade reliability with stainless steel construction and ANSI A156.5 compliance for demanding commercial applications. The security torx fastener system provides tamper-resistant installation while maintaining ADA compliance for accessibility requirements. Engineered for commercial sliding door applications where dependable performance and security are essential.

Manufacturer Resources

Product Template

Product Specs

Subcategory:
Flush Pull
Fasteners:
Four 10-24 FPHMS (security torx) sex nuts and bolts
ANSI/BHMA:
ADA compliant Meets ANSI A156.5 for J403 pulls
Product Group:
Sliding Door and Barn Door Hardware
Product Subgroup:
Sliding Door Pulls
Product Type:
Sliding Door Pulls
Commercial/Residential:
Commercial
Product Model:
27N
Product Projection:
3/8"
Product Category:
Sliding Door and Barn Door Hardware
Product Substrate:
Stainless Steel
Department:
Door Hardware

Hager 27N-US32D – Frequently Asked Questions

1) What size cutout does the Hager 27N flush cup pull need in a sliding door?
The 27N has a 5 x 5 inch face with a 3 x 3-1/2 inch opening, so the mortise pocket is cut to suit that 3 x 3-1/2 inch cup and the 5 inch square face covers the prep. Projection off the door face is 3/8 inch, and cup clearance for your fingers is 7/8 inch. Four 10-24 through holes carry the sex bolts.
2) Why does the Hager 27N use security Torx sex bolts instead of wood screws?
The 27N mounts with four 10-24 flat head machine screws in security Torx drive, through-bolted with sex nuts. Two things follow from that. It cannot be backed out with a common driver from the pull side, which is the point in detention-adjacent, school, and behavioral health work. And because it through-bolts rather than screwing into the door face, the fastening does not depend on a wood substrate holding a thread.
3) What is the closest cross-brand equivalent to the Hager 27N flush cup pull for a commercial sliding door?
The Trimco 7059 Series fOCAL flush cup pull is the nearest peer in form - both are recessed cup pulls for sliding doors rather than surface bar pulls. The Hager 27N is stainless steel with a 3/8 inch projection and mounts with four 10-24 FPHMS security torx sex nuts and bolts, which is the detail to check against the Trimco before swapping: if the opening was specified for tamper-resistant fasteners, the torx sex bolt set on the 27N is what satisfies it. Confirm the existing cutout size before ordering either, since a flush pull is only a drop-in if the mortise matches.
4) What flush pull should I use if the door cutout is too small for a 5 inch by 5 inch face?
The Trimco 7061 Series fOCAL small flush cup pull is built to a 2-3/4 inch by 2-1/16 inch size, so it suits a narrow stile or an existing small mortise where the Hager 27N's 5 inch by 5 inch face will not land. Measure the stile width first - a 5 inch face needs stile material on both sides of the cup, and a narrow-stile aluminum door usually will not give it.
5) What do I use instead of the Hager 27N on a bathroom or bedroom pocket door that needs to lock?
The Hager 27N is a pull only - it gives you grip and nothing else. For a pocket door that has to secure, the Ives 991A aluminum sliding door pull and the Schlage Residential SC991 solid brass sliding door pull both carry a privacy/bed/bath function, so the latch and thumbturn are part of the pull assembly. Pick between them on material: the 991A is aluminum, the SC991 is solid brass.
6) Will the Hager 27N flush pull rust in a shower room, kitchen, or coastal building?
Stainless steel construction in a 630 satin stainless finish, so the 27N holds up in wet and washdown areas better than a plated brass or aluminum pull would. It is the same finish family already on most commercial lever trim and push plates, so it matches out on a hospital or school corridor.
7) Do I need two flush pulls for a sliding door, one on each side?
Plan on two per leaf if the door is operated from both sides. The 27N is a single flush cup pull, and each one occupies its own pocket. Because it through-bolts with 10-24 sex nuts and bolts, back-to-back pairs on a 5 x 5 inch face need the two pockets to land clear of each other in the door thickness, so lay out the prep before you cut.
8) What is a smaller alternative to the Hager 27N if I do not have room for a 5 inch square flush pull?
At 5 x 5 inches the 27N face needs real stile. Where the rail or stile is tight, the Trimco 7061 Series fOCAL small flush cup pull measures 2-3/4 x 2-1/16 inches. The Trimco 7059 Series fOCAL flush cup pull is the other option in that family. Neither carries the security Torx fastening the 27N does, so if tamper resistance is the driver, keep the 27N and find the width.
9) I need a pull on a barn door that also has to be grabbed from the open position. Is a flush cup pull enough?
A flush cup like the 27N sits 3/8 inch off the face, which is what you want inside the pocket or where the door passes a jamb, but it gives you nothing to grab on the exposed face. For that job the Orca Hardware AH Series combo pairs a round or square bar pull on one side with a recessed pull on the other, and the AH combos are listed for 1-3/8 to 1-3/4 inch doors. Use the 27N where flush is required on both faces.
10) Does the Hager 27N come with the mounting hardware or do I order fasteners separately?
The fastening is included: four 10-24 flat head machine screws in security Torx drive with matching sex nuts. What you supply is the prep. You will want the security Torx bit on the truck, since a standard Torx or star bit will not seat in a pin-in Torx security head.
11) Is the Ives 991A or Schlage SC991 a substitute for the Hager 27N?
They look adjacent because all three are sliding door pulls, but they are not interchangeable. Both the Ives 991A and the Schlage SC991 are privacy/bed/bath function pulls, meaning they include a locking function intended for a bedroom or bath door. The Hager 27N is a flush pull with no locking function, specified as commercial and meeting ANSI A156.5 for J403 pulls. Substituting a privacy pull into a commercial opening that was specified as a J403 pull changes what the hardware does and can put the opening off the drawing.
12) I need a pull my hand can wrap around on a barn door, not a recessed cup. What are my options?
The Orca Hardware AH Series sliding door round bar and recessed pull combo and the AH Series square bar and recessed pull combo both pair a bar pull with a recessed pull in one set, so the leading edge gets a flush pocket and the face gets a graspable bar. Both are rated for a 1-3/8 inch to 1-3/4 inch door thickness range - check your slab against that. The Hager 27N is the flush cup alone, with a 3/8 inch projection that keeps it from snagging in a passageway; choose it when nothing may stand proud of the door face.
13) Which sliding door pull holds up best in a healthcare or school corridor where the hardware gets picked at?
For a facility standardizing on tamper resistance, the Hager 27N is the one built for it: stainless steel, commercial rated, ADA compliant and meeting ANSI A156.5 for J403 pulls, mounted with four 10-24 FPHMS security torx sex nuts and bolts so the fasteners cannot be backed out with a common driver. Among the peers, the Trimco 7059 fOCAL flush cup pull is the comparable flush cup, while the Ives 991A is aluminum and the Schlage SC991 is solid brass - both privacy function pulls aimed at bed and bath openings rather than a corridor standard.
14) Can I standardize the Hager 27N across a whole facility, and is there a template for the door prep?
Yes, and it is a reasonable standard for a portfolio: one model, one finish, one prep. The 27N is offered in 630 satin stainless only, so there is no finish decision to manage across buildings, and it meets ANSI A156.5 for J403 pulls for spec-driven work. Hager publishes a product template for the 27N at zensupply.com/content/pdf/hager/T-27N-Rev01.pdf, which is what your carpenters should cut from.
15) What is the difference between the Orca AH round bar combo and the AH square bar combo?
They are the same AH Series sliding door pull combo in two bar profiles - one round bar, one square bar - and both list the same 1-3/8 inch to 1-3/4 inch door thickness range. The choice is the profile that matches the rest of the hardware on the opening. Neither is a flush-only pull; if the door has to sit clear in a passage, the Hager 27N stainless steel flush cup is the different animal, with a 3/8 inch projection and no bar.
16) Can I mix Trimco fOCAL flush pulls and the Hager 27N on the same set of doors?
They can share an opening group, but the prep will not be common. The Trimco 7059 Series and the smaller Trimco 7061 Series at 2-3/4 inch by 2-1/16 inch are different sizes from each other and from the Hager 27N's 5 inch by 5 inch face with a 3 inch by 3-1/2 inch opening, so each takes its own cutout and its own template. If the goal is one prep across a floor, pick one model and hold to it; the 27N template is published for laying out the four 10-24 fastener holes.
How fast can I get the Hager 27N-US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 27N-US32D come with a warranty?
Absolutely. The Hager 27N-US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 27N-US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 27N-US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!