Hager 2928 Electric Strike wit...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$281.79
$211.29
Hager 2928 Electric Strike with Field Reversible Fail Safe/Secure Operation

Hager 2928 Electric Strike with Field Reversible Fail Safe/Secure Operation

(No reviews yet) Write a Review

Model: 2928-SC US32D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$281.79
$211.29
Adding to cart… The item has been added
Bulk Pricing:
Buy in bulk and save

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 41 - 61 and get 6% off
  • Buy 62 - 81 and get 11% off
  • Buy 82 - 122 and get 17% off
  • Buy 123 or above and get 24% off
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 2928 Electric Strike with Field Reversible Fail Safe/Secure Operation

Professional Electric Strike for Commercial Access Control Systems

The Hager 2928 Electric Strike delivers reliable access control with field reversible fail safe/secure operation and accommodates 1/2" to 3/4" latch throws. This commercial-grade electric strike features a 4-7/8" square corner stainless steel faceplate with stainless steel finish construction and operates on 12/24VAC/DC power for flexible system integration.

Professional Features & Benefits

  • Latch Compatibility: Accommodates 1/2" to 3/4" latch throws for versatile door hardware integration.
  • Field Reversible Operation: Configurable fail safe/secure modes allow adaptation to specific security requirements without replacement.
  • Flexible Power Options: 12/24VAC/DC operation provides compatibility with various access control systems.
  • Stainless Steel Construction: 4-7/8" square corner stainless steel faceplate with stainless steel finish ensures durability and corrosion resistance.
  • Commercial-Grade Design: Engineered for demanding commercial applications requiring reliable electronic access control.

Technical Specifications

  • Commercial/Residential: Commercial
  • Faceplate: 4-7/8"
  • Latch Throw: 1/2" - 3/4"
  • Subcategory: Electric Strikes

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm voltage (12/24VAC/DC) and current capacity before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for wiring access, ventilation, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure operational settings including fail-secure/fail-safe configuration per application requirements.
  6. Restore power and test all functions including normal operation, latch release, and integration with connected access control systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Security Systems
  • Office Building Access Control
  • Healthcare Facility Entry Points
  • Educational Institution Security
  • Retail Store Access Management
  • Industrial Facility Controlled Access
  • Multi-Tenant Building Entry Systems

Why Choose Hager Quality?

Hager electric strikes deliver professional-grade reliability with stainless steel construction and field reversible fail safe/secure operation for maximum installation flexibility. The 2928 model accommodates standard 1/2" to 3/4" latch throws with dual voltage capability for seamless integration into existing access control systems. Engineered for demanding commercial applications where dependable electronic access control is essential.

Electric strike for fail-safe or fail-secure access control applications. Compatible with cylindrical, mortise, and exit device trim.

Manufacturer Resources

Installation Instructions

Product Specs

Subcategory:
Electric Strikes
Product Group:
Electronic Access Controls
Product Subgroup:
Electric Strikes
Product Type:
Electric Strikes
Commercial/Residential:
Commercial
Latch Throw:
1/2" - 3/4"
Product Model:
2928
Product Voltage:
12/24VDC
Product Function:
Field Reversible Fail Safe/Secure
Face Plate:
4-7/8"
Product Category:
Electronic Access Controls
Department:
Door Hardware

Hager 2928-SC US32D – Frequently Asked Questions

1) Will the Hager 2928 electric strike work with my existing cylindrical lockset, or do I need a mortise lock?
The 2928 takes latch throws from 1/2 inch to 3/4 inch, which covers cylindrical locksets, mortise locks, and exit device trim. Measure the throw on the latch you already have: if it projects between 1/2 and 3/4 inch, the keeper accepts it. Anything longer than 3/4 inch is out of range and you need a different strike.
2) Can the Hager 2928 be set to fail safe or fail secure after it is already installed?
Yes, and that is the point of the 2928. Its fail safe/fail secure operation is field reversible, so an installer flips the configuration on the job rather than ordering a different part number. Fail secure keeps the door locked when power drops (the normal choice for exterior and stair doors); fail safe releases on power loss, which is what a fire alarm interface or an egress requirement usually calls for. If the AHJ changes the requirement on one opening, you reconfigure that unit instead of replacing it.
3) What size faceplate cutout does the Hager 2928 electric strike need in the frame?
The 2928 has a 4-7/8 inch square corner stainless steel faceplate. That is the standard ANSI strike prep length used on hollow metal and wood frames, so on a frame already prepped for a 4-7/8 inch strike it drops into the existing cutout. Square corner, not radius, so if your prep is radius corner you will see the corners. Install instructions are published at https://zensupply.com/content/pdf/hager/I-EA00077-Rev2.pdf.
4) Is the Hager 2928 electric strike fire rated?
Use a strike with a published fire rating on any labeled opening. Fire rated options we carry include the Von Duprin 6400 Series, rated 3-hour UL 10C in fail-secure, and the Von Duprin 4211, a Grade 1 fire rated strike for cylindrical locks with 12/24 VDC field-selectable operation. The Adams Rite 7240 is a fire-rated strike for cylindrical locksets with 5/8 inch latchbolt projection. For a non-labeled interior or office opening, the 2928 is a commercial-grade strike built for that duty.
5) The 2928 mounts in a hollow metal frame. What electric strike do I use instead on an aluminum storefront jamb?
The Hager 2928 uses a 4-7/8 inch square corner faceplate sized for standard ANSI frame prep. For an aluminum storefront jamb, the Adams Rite 7100 Series has a flat faceplate at 1-1/4 in x 4-7/8 in built specifically for aluminum jambs, and the Adams Rite 7160 is the same aluminum jamb application with a 1-1/4 in x 4-7/8 in faceplate. Adams Rite also builds the 7170 for hollow metal and wood jambs with the same faceplate size, so a glass front installer covering both frame types can stay in one series.
6) I do not want to cut the existing frame. Is there an electric strike that avoids new frame prep?
The Hager 2928 uses a 4-7/8 inch square corner faceplate, which assumes standard frame prep. Where cutting the frame is not an option, the Locknetics NC450 is a no cut electric strike. If the frame is already prepped to ANSI dimensions, the Dortronics 3300 Series ships a strike plate for ANSI prep at 4-7/8 in x 1-1/4 in and runs 12/24VDC with a latch bolt sensing switch. The Camden CX-ED1689L-4 is a fire rated low profile universal strike supplied with 4 faceplates, and the CX-ED1799L-8 is a fire rated Grade 1 dual monitor strike with 8 faceplates, so one unit can be matched to more than one existing cutout.
7) I need a Grade 1 electric strike for a fire rated door. Which ones carry that rating?
Grade 1 and fire rating are stated together on several peers: the Von Duprin 6400 32D is Grade 1, heavy duty, with a 3-Hour UL 10C rating in fail-secure and works with mortise or cylindrical locks in satin stainless steel; the Von Duprin 4211 32D is Grade 1, heavy duty and fire rated for cylindrical locks; the Von Duprin 6210 is Grade 1, heavy duty, UL 10C fire rated at 24 VDC fail-secure for mortise locks; and the Securitron MUNL mortise UnLatch strike is Grade 1 and fire rated. The Camden CX-ED1410/CX-ED1420 Series is a Grade 1 ANSI fire-rated universal strike. Note the two 6200 Series units and the CX-ED1959 gate strike are fail-secure or outdoor gate designs rather than field reversible.
8) Which electric strikes look like a substitute for the Hager 2928 but will not work on a standard interior swing door?
Several units in the same category are built for a different opening. The Camden CX-ED1959 Series is an outdoor rated gate strike with no fire rating. The SDC 30-4 Series is a rim mount strike for a 3/4 inch Pullman latchbolt, which pairs with a rim exit device rather than a cylindrical latch. The HES Folger Adam 310-4-2 is built for surface vertical rods. The Adams Rite 7100 and 7160 are made for aluminum jambs and their 1-1/4 in x 4-7/8 in flat faceplates suit storefront framing. The Hager 2928 itself is a commercial unit with a 4-7/8 inch square corner faceplate for 1/2 inch to 3/4 inch latch throws.
9) The Hager 2928 runs on 12/24VAC/DC. What if my power supply is a different voltage?
The Hager 2928 is specified at 12/24VDC. If the existing supply does not match, the Trine 004 runs 8-16VAC fail secure with a 6-1/4 in x 1-3/8 in faceplate and up to 5/8 in throw, and is fire rated. The Trine 2001 runs 16-24VAC/DC fail secure with a 5-7/8 in x 1-1/4 in faceplate and up to 5/8 in throw, also fire rated. Note both are fixed fail secure and their faceplates differ from the 4-7/8 inch plate on the 2928, so frame prep needs checking before swapping.
10) What is the difference between a field reversible electric strike like the Hager 2928 and a fail-secure-only strike?
A fail-secure-only strike is fixed at the factory: lose power, the door stays locked, and if the opening later needs to release on alarm you buy a new strike. The 2928 is field reversible, so the same unit is configured either way at install. Fixed fail-secure units we carry include the RCI 15BS and the Trine 001 Series. The Trine EN4301 is another field selectable option, fire rated, 12VDC, with up to 7/8 inch throw. Buy field reversible when you are spec'ing a building and do not yet know which openings the fire alarm ties into.
11) My exit device has a 3/4 inch pullman latch. Is the Hager 2928 the right strike, or do I need a rim strike?
The 2928 covers up to 3/4 inch throw and the description calls out exit device trim, so a 3/4 inch latch is within range for a frame-mounted application. If you are working a rim exit device that needs a surface or rim mount rather than a frame cutout, the SDC 30-4 Series is a 3/4 inch pullman latchbolt rim mount strike in stainless steel. For surface vertical rod devices, the HES Folger Adam 310-4-2 is sold as a complete strike pac for that application.
12) Can I use the Hager 2928 electric strike on an exterior gate or an outdoor opening?
The 2928 is specified as a commercial indoor-duty strike with a stainless steel faceplate and stainless construction for corrosion resistance, but it carries no outdoor rating. For a gate or a weather-exposed opening, the Camden CX-ED1959 Series is built as an outdoor rated electric gate strike, and the Trine EN4301 is listed for indoor/outdoor use, fire rated, 12VDC, field selectable fail safe or fail secure.
13) I have a high traffic entrance getting hundreds of cycles a day. Is the Hager 2928 heavy duty enough, or should I step up?
The 2928 is a commercial-grade strike with stainless steel construction, sized for office, retail, healthcare, education and multi-tenant entry work. For an opening you would classify as heavy duty or want Grade 1 on, we carry the Alarm Controls AES-100, a Grade 1 heavy duty strike, the Locknetics MDS100 and MS100 in US32D, both heavy duty, and the Von Duprin 4211 in 32D, Grade 1 heavy duty and fire rated with 12/24 VDC field-selectable operation.
14) Do I have to cut the frame to install the Hager 2928 electric strike?
Frame prep is required. The 2928 mounts with a 4-7/8 inch square corner faceplate into the jamb, and the install sequence runs power verification, wiring through the frame, fail safe/secure configuration, then function test, so you need wire access in the jamb. If cutting the frame is not an option on your opening, the Locknetics NC450 US32D is sold as a no cut electric strike. Hager publishes the full install and wiring detail at https://zensupply.com/content/pdf/hager/I-EA00077-Rev2.pdf.
15) Can one Hager 2928 handle a pair of doors?
No. The 2928 is a single strike sized to one 4-7/8 inch jamb prep and one latch throw between 1/2 and 3/4 inch. A pair of doors needs a strike built for the double door condition: the Rockwood double door electric strike with a 3/4 keeper is a Grade 1 fire rated 310-1 Series unit made for that application. Otherwise you are ordering two separate strikes, one per leaf, and each leaf needs its own wire run.
16) My latch throw is only 5/8 inch. What are my options besides the Hager 2928?
A 5/8 inch latch sits right in the middle of the 2928 range of 1/2 to 3/4 inch, so it works. If you want a strike built specifically around that throw, the SDC 15 Series is a 5/8 inch latchbolt strike with 12/24 VDC operation, and the SDC 45F Series is a fire-rated 5/8 inch latchbolt strike with a radius corner faceplate, useful when your frame prep has radius corners rather than square. The HES Folger Adam 310-1(X) strike body covers 1/2, 5/8 or 3/4 inch throws and is Grade 1 fire rated.
17) Is there a lower cost electric strike than the Hager 2928 for a light commercial interior door?
The Hager 2928 is a commercial unit with field reversible fail safe/secure operation. Where the opening only needs one mode, simpler fail-secure units cover it: the Trine 001 Series is a light commercial fail-secure strike with a 5-7/8 in x 1-1/4 in faceplate and no fire rating, the RCI 15BS is an economy fail-secure strike for special offset latch entry with no fire rating, and the SDC 25 Series is a value strike for 1/2 inch latchbolts. The SDC 15 Series is a value strike with 12/24 VDC operation for 5/8 inch latchbolts.
18) What is the difference between the Hager 2928 and a strike sized for a 5/8 inch latchbolt like the SDC 45F or Adams Rite 7240?
The Hager 2928 covers a latch throw range of 1/2 inch to 3/4 inch, so it spans several latch projections on one part number. The SDC 45F Series is a fire-rated strike for 5/8 inch latchbolts with a radius corner faceplate, and the Adams Rite 7240 is a fire-rated strike for cylindrical locksets at 5/8 inch latchbolt projection in the 7200 Series. Those two are matched to a specific projection and corner style, while the 2928 uses a 4-7/8 inch square corner faceplate.
19) We already run HES strikes in the building. Can I stay in that family instead of switching to the Hager 2928?
Yes. The HES Folger Adam 310-1(X) strike body accepts 1/2 inch, 5/8 inch or 3/4 inch throw latchbolts and is Grade 1 and fire rated, matching the 1/2 inch to 3/4 inch latch throw range the Hager 2928 covers. Service parts are carried for the HES 1500 Series and 1600 Series, both Grade 1 and fire rated, which matters when the goal is keeping one family across a facility rather than introducing a second manufacturer.
20) What finish does the Hager 2928 electric strike come in, and will it match the rest of my satin stainless hardware?
One finish only: 630, satin stainless steel, with stainless steel faceplate construction. That is the same 630/US32D family as most commercial levers, exit devices, and push plates, so it matches a standard satin stainless opening. There is no bronze or brass option on the 2928, so if the building is standardized on a dark finish this is the wrong strike for that elevation.
21) Does the finish on the Hager 2928 match the stainless strikes we already have on other doors?
The Hager 2928 is supplied in 630 satin stainless steel. Among comparable strikes, the Von Duprin 6400 32D is described in satin stainless steel, and the Locknetics CS450-32D, MDS100 US32D, MS100 US32D and NC450 US32D all carry the 32D designation in their part numbers, which is the same satin stainless appearance family used across door hardware. The SDC 30-4 Series is stated as stainless steel construction.
How fast can I get the Hager 2928-SC US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 2928-SC US32D come with a warranty?
Absolutely. The Hager 2928-SC US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 2928-SC US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 2928-SC US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!