Hager 31G Square Corner Pull P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$103.04
$94.76
Hager 31G Square Corner Pull Plate - Half Round Pull, 0.05 Gauge

Hager 31G Square Corner Pull Plate with Half Round Pull - 0.050 Gauge Commercial Door Hardware

(No reviews yet) Write a Review

Model: 31G 3.5x15 US32D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$103.04
$94.76
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 31G Square Corner Pull Plate with Half Round Pull - 0.050 Gauge Commercial Door Hardware

Professional Square Corner Pull Plate Solution

The Hager 31G Square Corner Pull Plate features a half round pull design with 0.050" (1.3 mm) gauge construction for reliable commercial door applications. Available in multiple premium finishes including US3, US4, US10, DBZ, US19, US26, US26D, US28, US32, and US32D, this pull plate meets ANSI A156.6 standards for J301 push plate applications. Constructed from durable materials including aluminum, brass, bronze, and stainless steel options for long-lasting performance in demanding commercial environments.

Professional Features & Benefits

  • Heavy-Duty Construction: 0.050" (1.3 mm) gauge thickness provides exceptional durability and resistance to warping in high-traffic commercial applications.
  • Premium Material Options: Available in aluminum, brass, bronze, and stainless steel construction to match architectural requirements and environmental conditions.
  • Comprehensive Finish Selection: Ten professional finish options including US3, US4, US10, DBZ, US19, US26, US26D, US28, US32, and US32D for design flexibility.
  • ANSI Compliance: Meets ANSI A156.6 standards for J301 push plate applications ensuring code compliance and professional performance.
  • Customization Options: May be ordered cut for cylinder (CFC) and lasered "Push" marking available in US32 and US32D finishes for specialized applications.
  • Professional Installation: Includes #6 x 5/8" OPH tapping screws with countersunk design for secure, flush mounting on door surfaces.
  • Square Corner Design: Half round pull configuration provides ergonomic grip while maintaining clean architectural lines suitable for modern commercial installations.

Technical Specifications

  • Certifications: EPD
  • Fasteners: #6 x 5/8" OPH Tapping Screws - countersunk
  • Finishes: US3, US4, US10, DBZ, US19, US26, US26D, US28, US32, US32D
  • Gauge: 0.050" (1.3 mm)
  • Material: Aluminum, Brass, Bronze, Stainless Steel
  • Options: May be ordered cut for cylinder (CFC).
  • Subcategory: Door Pulls, Push and Pull Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness and material compatibility for this pull plate.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door surface for proper alignment.
  3. Prepare door by drilling required holes as specified in manufacturer instructions using appropriate drill bits for door material.
  4. Install pull plate using provided #6 x 5/8" OPH tapping screws, ensuring countersunk heads sit flush with plate surface.
  5. Adjust final positioning for proper alignment and verify secure mounting with no movement or looseness.
  6. Test pull plate operation to verify proper function and ergonomic access. Refer to manufacturer documentation for complete installation details and specifications.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager pull plates deliver professional-grade reliability with heavy-duty 0.050" gauge construction and premium material options including aluminum, brass, bronze, and stainless steel. ANSI A156.6 compliance ensures code-compliant performance while multiple finish options provide design flexibility. Engineered for demanding commercial applications where dependable door hardware performance and architectural aesthetics are essential.

Manufacturer Resources

Installation Instructions

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Subcategory:
Door Pulls, Push and Pull Plates
Department:
Door Hardware

Hager 31G 3.5x15 US32D – Frequently Asked Questions

1) Do screws come with the Hager 31G pull plate or do I supply my own?
Mounting screws are included: #6 x 5/8 inch oval pan head tapping screws, countersunk so the heads sit flush in the plate. That is a surface-applied screw fastening, not a through-bolt. On a high abuse opening where students or carts hit the pull, a through-bolted plate like the Ives 8302 is the better call.
2) Can the Hager 31G pull plate be cut for a cylinder or a deadbolt?
Yes, it may be ordered cut for cylinder (CFC). That is how you use the plate on a door that also carries a rim cylinder or mortise cylinder, so the plate does not have to be field-drilled. Specify CFC when you order rather than cutting it on site.
3) Does the Hager 31G meet ANSI standards for a spec job?
It meets ANSI A156.6 for J301 push plate applications, and it carries an EPD (environmental product declaration). That is the reference a specifier or institutional buyer usually needs written against architectural door trim on a submittal.
4) I need a matching push plate for the other side of the door. Does the 31G include one?
No. The 31G is a pull plate with a half round pull; a flat push plate for the opposite face is a separate item. Matching sizes in a plain push plate are available, for example the Delaney 3-1/2 x 15 push plate or the Delaney 4 x 16 push plate, which line up with the same two plate footprints.
5) What is the closest half-round pull plate to the Hager 31G from another manufacturer?
The Trimco 1014 Series is the nearest match in concept - it is a half-round pull plate with a 6 inch center-to-center pull, the same half round pull configuration the Hager 31G uses. The Hager 31G is offered in 3-1/2 inch by 15 inch and 4 inch by 16 inch plate sizes across ten finishes including 605 bright brass, 626 satin chrome and 630 satin stainless steel. If the drawing calls for a half-round grip, either part answers it; confirm the pull center-to-center your opening was templated for before swapping.
6) I need a pull plate in the same sizes as the Hager 31G but from a different brand - what matches?
Delaney lists pull plates in both of the 31G plate sizes: the DLY-4900xx is a 3-1/2 inch by 15 inch door pull plate and the DLY-490xx0 is a 4 inch by 16 inch door pull plate. Those are the same two plate footprints the Hager 31G is built in, so an existing 3-1/2 x 15 or 4 x 16 door prep will accept either family. The 31G carries 0.050 inch gauge construction and ships with #6 x 5/8 inch OPH countersunk tapping screws.
7) My entrance doors see abusive traffic and the plates keep loosening - what is a heavier alternative to the Hager 31G?
Look at through-bolted or cast heavy duty plates. The Ives 8302 is a heavy duty pull plate with through bolt mounting, which carries pull load through the door rather than into surface screws. The Ives 8303 is a heavy duty pull plate offered with 8 inch or 10 inch center-to-center mounting. Trimco 1010, 1012 and 1013 are also cast heavy duty pull plates. The Hager 31G is 0.050 inch gauge and mounts with #6 x 5/8 inch OPH countersunk tapping screws, which suits normal commercial traffic.
8) Will the Hager 31G work as the pull trim on an exit device?
It is not built as exit device trim. The Hager 31G is a surface-applied square corner pull plate mounted with #6 x 5/8 inch OPH tapping screws, and it can be ordered cut for cylinder. When the pull has to pair with an exit device, the Detex P/PN Series pull plate is made specifically for Detex Value Series exit devices. Use the device-matched trim on those openings and reserve the 31G for a plain door face.
9) Which finishes can I order the Hager 31G in?
Six finishes are orderable on both plate sizes: 605 bright brass, 606 satin brass, 613 satin bronze oil-rubbed, 626 satin chrome, 628 satin aluminum, and 630 satin stainless steel. If you are matching existing hardware in a building, 630 and 626 are the usual commercial pairings and 613 the usual dark match.
10) How thick is the Hager 31G plate, and will it hold up in a school or hospital corridor?
The plate is 0.050 inch (1.3 mm) gauge, which is a heavier commercial gauge than the thin decorative plates and resists warping where the pull gets pushed and pulled all day. It is used in offices, schools, healthcare, retail, warehouses, multi-tenant residential, and municipal buildings. For truly abusive openings, step up to a cast plate such as the Trimco 1010 Series.
11) Is there a version of the Hager 31G with PUSH lasered on it?
Lasered "Push" marking is available, but only in the US32 and US32D finishes. If you need marked plates in chrome, brass, or bronze, the marking is not offered there, so plan on a separate applied sign for those openings.
12) What material is the Hager 31G pull plate made of?
Depending on finish, the plate is produced in aluminum, brass, bronze, or stainless steel. For exterior or wash-down openings, the satin stainless 630 is the corrosion-tolerant pick; aluminum in 628 is the usual match for clear-anodized aluminum storefront doors.
13) What else could I use instead of the Hager 31G half round pull plate?
Same half-round pull profile: the Trimco 1014 Series, which lists a 6 inch center-to-center pull. Other directions worth knowing: Trimco 1013 is a round pull at 5-1/2 inch CTC, Trimco 1012 is a cast tapered plate at 5-1/2 inch CTC, and the Ives 8303 offers 8 inch or 10 inch center-to-center mounting if you are matching an existing hole pattern. For decorative interior work rather than commercial corridors, Emtek Modern or Knoxville push and pull plates are the styled option.
14) Can I put a 31G pull plate on a door that has an exit device?
A general-purpose pull plate like the 31G is not a substitute for the pull trim that belongs to a specific exit device. If the door has a Detex Value Series device, the pull trim made for it is the Detex P/PN Series pull plate. Use the device manufacturer's trim where the pull has to work with the device's cylinder and mounting.
15) The push side of my door pair does not need a grip - what do I use instead of the Hager 31G?
Use a plain push plate on that leaf. Delaney offers the DLY-4905xx in 3-1/2 inch by 15 inch and the DLY-490xxx in 4 inch by 16 inch, matching the two plate sizes the Hager 31G is made in, so the pull side and push side of a pair read the same width and height. The Hager 31G itself meets ANSI A156.6 for J301 push plate applications and can be lasered "Push" in US32 and US32D.
16) What is the difference between the Trimco 1010, 1012 and 1013 pull plates if I am cross-shopping the Hager 31G?
They differ in pull profile and spread. The Trimco 1010 Series is a cast pull plate with a 5 inch center-to-center pull, the 1012 is a cast tapered heavy duty plate with a 5.5 inch CTC pull, and the 1013 uses a round pull at 5.5 inch CTC. All three are cast heavy duty. The Hager 31G uses a half round pull on a square corner plate at 0.050 inch gauge, in aluminum, brass, bronze or stainless steel. Match the pull center-to-center to whatever the door is already drilled for.
17) Can I use an Emtek push and pull plate instead of the Hager 31G on a commercial opening?
They serve different design intents. Emtek offers Knoxville, Modern and lost wax cast bronze Petal push and pull plate sets, which are decorative architectural patterns. The Hager 31G is a square corner commercial plate meeting ANSI A156.6 for J301 push plate applications, in 3-1/2 x 15 and 4 x 16 sizes with ten finishes and a cut-for-cylinder option. If the specification cites ANSI A156.6 or you need CFC prep, stay with the 31G; if the opening is being chosen for appearance, the Emtek patterns are the decorative route.
18) Is there an installation template for the Hager 31G?
Yes. Hager publishes installation instructions for the 31G (document I-TA01319), and it includes the hole locations to mark before drilling. Mark from the template, drill for the #6 screws, and set the countersunk heads flush with the plate face.
How fast can I get the Hager 31G 3.5x15 US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 31G 3.5x15 US32D come with a warranty?
Absolutely. The Hager 31G 3.5x15 US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 31G 3.5x15 US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 31G 3.5x15 US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!