Hager BB1199-NRP Non-Removable...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$145.92
$77.24
Hager BB1199-NRP Non-Removable Pin Full Mortise Ball Bearing Heavy Weight Hinge

Hager BB1199-NRP Non-Removable Pin Full Mortise Ball Bearing Heavy Weight Hinge

(No reviews yet) Write a Review

Model: BB1199-4.5X4.5-US32D-NRP
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$145.92
$77.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager BB1199-NRP Non-Removable Pin Full Mortise Ball Bearing Heavy Weight Hinge

Professional Heavy-Duty Commercial Door Hinge Solution

The Hager BB1199-NRP delivers professional-grade performance as a full mortise ball bearing hinge designed for heavy-weight commercial applications. This 5-knuckle hinge features four ball bearings with a non-removable pin design incorporating tip and plug construction. Available in brass with stainless steel pin or stainless steel with stainless steel pin materials, meeting ANSI A2111 and ANSI A5111 certification standards for demanding commercial door installations.

Professional Features & Benefits

  • Heavy-Duty Ball Bearing Operation: Four precision ball bearings provide smooth, long-lasting operation under heavy door loads and high-frequency use.
  • Non-Removable Pin Security: NRP configuration with tip and plug prevents unauthorized pin removal while maintaining serviceability for authorized personnel.
  • 5-Knuckle Design: Full mortise construction with 5 knuckles ensures optimal load distribution and structural integrity for commercial door applications.
  • Premium Material Construction: Available in brass with stainless steel pin or stainless steel with stainless steel pin for exceptional durability and corrosion resistance.
  • Fire Rating Compliance: Stainless steel model complies with NFPA80 requirements for use on fire rated door assemblies in critical applications.
  • ANSI Certified Performance: Meets ANSI A2111 (Brass) and ANSI A5111 (Stainless Steel) standards with ANSI/BHMA A156.1 manufacturing compliance.
  • Extensive Finish Options: Available in US3, US4, US5, US9, US10, US15, US15A, US19, US26, and US26D finishes for architectural coordination.
  • Electric Modification Ready: Compatible with EMN (Electric Monitor Only), ETW (Electric Through-Wire Only), ETM (Electric Through-Wire with Monitoring), and Quick Connect options.
  • Four ball bearings. Non-rising removable pin with tip and plug.

Technical Specifications

  • ANSI/BHMA: ANSIA2111 (Brass), ANSIA5111 (Stainless Steel)
  • Bearing Type: Ball Bearing
  • Certifications: ANSI A2111 (Brass), ANSI A5111 (Stainless Steel)
  • Commercial/Residential: Commercial
  • Electric Modifications: EMN (Electric Monitor Only), ETW (Electric Through-Wire Only), ETM (Electric Through-Wire with Monitoring), Quick Connect
  • Features: Four ball bearings. Non-rising removable pin with tip and plug.
  • Finishes: US3, US4, US5, US9, US10, US15, US15A, US19, US26, US26D
  • Fire Rating: Stainless steel model complies with NFPA80 requirements for use on fire rated door assemblies.
  • Knuckles: Fire Rating: Stainless steel model complies with NFPA80 requirements for use on fire rated door assemblies.
  • Material: Brass with Stainless Steel Pin, Stainless Steel with Stainless Steel Pin.
  • Notes: Furnished with fastener hole locations that conform to standards approved by ANSI A156.7.
  • Options: NRP (Non-removable pin)
  • Series: BB1199
  • Subcategory: Full Mortise Hinges

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, frame material compatibility, and handing requirements for this full mortise application.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on both door and frame surfaces, ensuring proper alignment with ANSI A156.7 approved fastener hole patterns.
  3. Prepare door and frame by routing mortise pockets to accommodate both hinge leaves, maintaining precise depth for flush installation.
  4. Install all mounting hardware and secure the hinge leaves to door and frame per manufacturer torque specifications using appropriate fasteners for the substrate material.
  5. Adjust hinge alignment for proper door operation, ensuring smooth swing throughout the full range of motion without binding or excessive play.
  6. Test door operation to verify proper function, check pin security, and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Fire-Rated Door Assemblies
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager BB1199-NRP hinges deliver professional-grade reliability with precision ball bearing construction and heavy-weight rated performance for demanding commercial applications. ANSI certified materials and NFPA80 fire rating compliance ensure code-compliant installations. Engineered for high-frequency use where dependable door operation and security are essential.

Full mortise commercial hinge engineered to meet or exceed ANSI standards for door weight, frequency of use, and finish durability.

Product Specs

Subcategory:
Full Mortise Hinges
Knuckles:
5
Product Group:
Door Hinges and Pivots
Product Subgroup:
Full Mortise Hinges
Product Type:
Half Surface Hinges
Features:
Four ball bearings. Non-rising removable pin with tip and plug.
ANSI/BHMA:
ANSI A2111 (Brass), ANSI A5111 (Stainless Steel)
Series:
BB1199
Bearing Type:
Ball Bearing
Commercial/Residential:
Commercial
Product Substrate:
Brass with Stainless Steel Pin, Stainless Steel with Stainless Steel Pin
Product Category:
Door Hinges and Pivots
Department:
Door Hardware

Hager BB1199-4.5X4.5-US32D-NRP – Frequently Asked Questions

1) What sizes does the Hager BB1199-NRP hinge come in, and which one do I need?
Two sizes are offered on the BB1199-NRP: 4-1/2 x 4-1/2 inches and 5 x 4-1/2 inches. The first number is the hinge height, the second the open width. On standard commercial doors the 4-1/2 x 4-1/2 is the common pick; go to the 5 inch height when the door is thicker or heavier and you need more leaf area and screw pattern on the door edge. Both are ball bearing, 5 knuckle, heavy weight units, so the choice is about the opening, not about duty level.
2) What does the NRP on a Hager BB1199 hinge actually do for security?
NRP means non-removable pin. The BB1199-NRP uses a tip and plug construction so the pin cannot be pulled out of the barrel by someone standing on the outside of the door. That matters on any out-swinging door where the hinge barrels are exposed to the unsecured side, which is most exterior commercial doors, stairwell doors, and tenant entries. If the door swings in and the hinges are on the protected side, the NRP version is not doing anything the standard BB1199 would not.
3) Will the BB1199 hinge drop into my existing hinge mortise, or do I have to re-rout the frame?
Fastener hole locations on the BB1199 conform to ANSI A156.7 approved patterns, which is the standard template most commercial full mortise hinges are cut to. If the existing pocket is the same size, 4-1/2 x 4-1/2 or 5 x 4-1/2, and was prepped to that standard, the leaves land in the existing mortise and screw holes. Measure the old hinge before ordering: a 4-1/2 inch pocket will not take the 5 inch hinge without cutting the mortise taller.
4) Can I get a Hager BB1199 hinge wired for access control or door position monitoring?
Yes. The BB1199 accepts electric modifications: EMN for monitoring only, ETW for through-wire only, ETM for through-wire with monitoring, and a Quick Connect option. EMN is the one to specify when you only need to report whether the door is open or closed to the access control panel. ETW is for carrying power through the door to an electrified lock or exit device trim. ETM does both on one hinge. These are ordered as a modification to the hinge, so decide before you order rather than after.
5) Can the BEST F173 be used on a fire rated door assembly in place of the Hager BB1199-NRP?
Do not treat the two as interchangeable on a fire rated opening. The stainless steel Hager BB1199-NRP complies with NFPA 80 requirements for use on fire rated door assemblies, and its fastener hole locations conform to standards approved by ANSI A156.7. The BEST F173 is described as a steel half surface hinge with a removable pin and plain bearing at a medium duty level, and carries no such fire assembly compliance in that description. For a labeled opening, specify the stainless steel BB1199-NRP; reserve the F173 for non-rated interior work.
6) What is the difference between the Hager BB1199-NRP and the BEST F173 half surface hinge?
They are built for different service levels. The Hager BB1199-NRP uses ball bearing knuckles with four ball bearings and a non-rising pin with tip and plug, and is designated for commercial use with ANSI A2111 (brass) and ANSI A5111 (stainless steel) certification. The BEST F173 is a steel half surface hinge with a plain bearing and a removable pin, rated medium duty. In practical terms: the BB1199-NRP's ball bearings carry heavier leaves and higher cycle counts, and its non-removable pin resists pin pulling on an out-swinging door, while the F173's removable pin comes out by design and its plain bearing suits lower-traffic medium duty openings.
7) Do I need a ball bearing hinge, or is a plain bearing hinge good enough for my door?
Ball bearing is what you want on heavy doors and high traffic openings. The BB1199 carries four ball bearings, which take the load off the knuckles and keep the door swinging without wear on entrances, stairwells, and doors with closers on them. Plain bearing is a medium duty answer for lighter, lower cycle doors, and ZenSupply carries the BEST F173 half surface hinge in that class, a medium duty plain bearing unit with a removable pin. If the door is hollow metal exterior, has a closer, or gets used all day, the ball bearing BB1199 is the right family.
8) Is the Hager BB1199 hinge rated for commercial use, and what ANSI standard does it meet?
It is a commercial grade hinge, not a residential one. The BB1199 is certified to ANSI A2111 in brass and ANSI A5111 in stainless steel, with ANSI/BHMA A156.1 manufacturing compliance. Those are the hinge standards a spec writer or a facilities buyer looks for when standardizing openings across a school, hospital, or office building, so the same model can be written into the hardware schedule for the whole facility.
9) Which half surface hinge should I use if the opening needs an electric transfer through the hinge?
Specify the Hager BB1199-NRP. It accepts EMN electric monitor only, ETW electric through-wire only, ETM electric through-wire with monitoring, and Quick Connect modifications, so power or monitoring can be run to an electrified lock or contact through the hinge itself. The BEST F173 is a steel half surface hinge with a removable pin and plain bearing at medium duty, with no electric modification in its description, so an opening with a through-wire requirement should be built around the BB1199-NRP rather than substituted.
10) Will a satin stainless BB1199 hinge match the 630 lever sets and exit devices already on my building?
Yes, the BB1199-NRP is supplied in 630, satin stainless steel, which is the most common commercial finish and matches 630 levers, exit devices, and push plates already hanging in most institutional buildings. It is also the corrosion resistant choice, stainless leaves with a stainless pin, so it holds up on exterior and washdown openings better than a plated brass finish would.
11) How many hinges do I need per door with the Hager BB1199?
Three per leaf is the normal commercial count on a standard height door, and four on doors taller than 7 feet 6 inches or on unusually heavy leaves. Hager publishes a standard hinge locations sheet for the vertical spacing, and the BB1199 is a heavy weight ball bearing hinge, so the count is driven by door height and weight rather than by any limitation of the hinge itself. Order all hinges on an opening as the same size and finish so the mortises are cut once to one template.
How fast can I get the Hager BB1199-4.5X4.5-US32D-NRP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager BB1199-4.5X4.5-US32D-NRP come with a warranty?
Absolutely. The Hager BB1199-4.5X4.5-US32D-NRP is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager BB1199-4.5X4.5-US32D-NRP?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager BB1199-4.5X4.5-US32D-NRP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!