You may also like
Hammer Drill Bits SDS-Plus Dia 1/4" 8-1/4 " (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Sub Division:
- Electrical-E H2
- Department:
- Tools
- Product Group:
- Power Tools & Accessories
- Product Subgroup:
- Drill & Driver Bits
- Product Type:
- Masonry Drill Bit
Metallics SDS149 – Frequently Asked Questions
1) Will the Metallics SDS149 drill bit fit my rotary hammer?
The SDS149 has an SDS-Plus shank, so it drops into any SDS-Plus rotary hammer. It will not fit an SDS-Max or spline-drive hammer, and it is not meant for a standard three-jaw keyed or keyless chuck. If your hammer takes the smaller SDS-Plus shank with the two open slots and two closed slots, this is the right shank.
2) What diameter and length is the Metallics SDS149 hammer bit?
It drills a 1/4 inch hole and the bit measures 8-1/4 inches overall. That length gives you useful depth for anchoring into concrete block or slab while still fitting in tight ceiling and wall work; for deeper through-drilling you need a longer bit.
3) Can I use a 1/4 inch SDS-Plus bit like the SDS149 for tapcon and anchor holes in concrete?
That is exactly the use case for a 1/4 inch SDS-Plus bit. Electricians and contractors run it for small concrete and masonry anchors when mounting strut, straps, boxes and conduit clamps. Match the bit diameter to the anchor manufacturer's specified hole size before you drill, and clear dust from the hole so the anchor seats to full depth.
4) Is the Metallics SDS149 sold singly or in a multi-pack?
One bit per order, supplied in a pouch. If you are stocking a van or a crew for repetitive 1/4 inch anchor drilling, order the quantity you need rather than expecting a set.
5) What is the part number to order the Metallics 1/4 inch by 8-1/4 inch SDS-Plus bit?
Order it as Metallics SDS149. That is the manufacturer part number for the 1/4 inch diameter, 8-1/4 inch SDS-Plus hammer drill bit, single piece.
How fast can I get the Metallics SDS149 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SDS149 come with a warranty?
Absolutely. The Metallics SDS149 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SDS149?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SDS149 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.